首页 |元器件品牌

5962-9751401QHA [TI]

军用级、双路、10V、52kHz 运算放大器 | U | 10 | -55 to 125;
5962-9751401QHA
型号： 5962-9751401QHA
厂家： TEXAS INSTRUMENTS    TEXAS INSTRUMENTS
描述：

军用级、双路、10V、52kHz 运算放大器 | U | 10 | -55 to 125

放大器 运算放大器
文件： 总42页 (文件大小：1286K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TLV2422, TLV2422A, TLV2422Y  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001  
Output Swing Includes Both Supply Rails  
Low Input Bias Current . . . 1 pA Typ  
Extended Common-Mode Input Voltage  
Range . . . 0 V to 4.5 V (Min) With 5-V Single  
Supply  
Micropower Operation . . . 50 µA Per  
Channel  
600-Ω Output Drive  
No Phase Inversion  
Available in Q-Temp Automotive  
HighRel Automotive Applications  
Configuration Control / Print Support  
Qualification to Automotive Standards  
Low Noise . . . 18 nV/√Hz Typ at f = 1 kHz  
Low Input Offset Voltage  
950 µV Max at T = 25°C (TLV2422A)  
A
description  
HIGH-LEVEL OUTPUT VOLTAGE  
vs  
HIGH-LEVEL OUTPUT CURRENT  
The TLV2422 and TLV2422Aare dual low-voltage  
operational amplifiers from Texas Instruments.  
The common-mode input voltage range for this  
device has been extended over the typical CMOS  
amplifiers making them suitable for a wide range  
of applications. In addition, the devices do not  
phase invert when the common-mode input is  
driven to the supply rails. This satisfies most  
design requirements without paying a premium  
for rail-to-rail input performance. They also exhibit  
rail-to-rail output performance for increased  
dynamic range in single- or split-supply  
applications. This family is fully characterized at  
3-V and 5-V supplies and is optimized for  
low-voltageoperation. TheTLV2422onlyrequires  
50 µA of supply current per channel, making it  
ideal for battery-powered applications. The  
TLV2422 also has increased output drive over  
previous rail-to-rail operational amplifiers and can  
drive 600-Ω loads for telecom applications.  
5
V
DD  
= 5 V  
T
A
= –40°C  
4
3
T
A
= 25°C  
2
1
0
T
= 85°C  
A
T
= 125°C  
A
0
4
8
12 16 20 24 28 32 36 40  
I
– High-Level Output Current – mA  
OH  
Other members in the TLV2422 family are the  
high-power, TLV2442, and low-power, TLV2432,  
versions.  
Figure 1  
The TLV2422, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for  
high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and  
low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In  
addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when  
interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV2422A is available with  
a maximum input offset voltage of 950 µV.  
Ifthedesignrequiressingleoperationalamplifiers, seetheTITLV2211/21/31. Thisisafamilyofrail-to-railoutput  
operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal  
for high density, battery-powered equipment.  
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of  
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.  
Advanced LinCMOS is a trademark of Texas Instruments.  
Copyright 2001, Texas Instruments Incorporated  
On products compliant to MIL-PRF-38535, all parameters are tested  
PRODUCTION DATA information is current as of publication date.  
Products conform to specifications per the terms of Texas Instruments  
standard warranty. Production processing does not necessarily include  
unless otherwise noted. On all other products, production  
testing of all parameters.  
processing does not necessarily include testing of all parameters.  
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A, TLV2422Y  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER 1997 – REVISED APRIL 2001  
AVAILABLE OPTIONS  
PACKAGED DEVICES  
V
max  
CHIP FORM  
(Y)  
IO  
SMALL  
OUTLINE  
(D)  
CERAMIC  
FLAT PACK  
(U)  
T
A
CHIP CARRIER  
(FK)  
CERAMIC DIP  
(JG)  
TSSOP  
(PW)  
AT 25°C  
0°C to 70°C  
2.5 mV  
TLV2422CD  
—
—
TLV2422CPWLE  
—
950 µV  
2.5 mV  
TLV2422AID  
TLV2422ID  
—
—
—
—
TLV2422AIPWLE  
—
—
–40°C to 85°C  
—
TLV2422Y  
950 µV  
2.5 mV  
TLV2422AQD  
TLV2422QD  
—
—
—
—
—
—
—
—
–40°C to 125°C  
–55°C to 125°C  
950 µV  
2 mV  
—
—
TLV2422AMFK  
TLV2422MFK  
TLV2422AMJG  
TLV2422MJG  
—
—
TLV2422AMU  
TLV2422MU  
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLV2422CDR). The PW package is available only left-end taped  
and reeled. Chips are tested at 25°C.  
D OR JG PACKAGE  
(TOP VIEW)  
PW PACKAGE  
(TOP VIEW)  
1
2
3
8
7
6
5
1OUT  
1IN–  
1IN+  
/GND  
V
DD+  
1OUT  
1IN–  
1IN+  
/GND  
V
DD+  
1
2
3
4
8
7
6
5
2OUT  
2IN–  
2IN+  
2OUT  
2IN–  
2IN+  
4
V
DD –  
V
DD–  
FK PACKAGE  
(TOP VIEW)  
U PACKAGE  
(TOP VIEW)  
3
2
1
20 19  
18  
NC  
NC  
1IN–  
NC  
4
5
6
7
8
NC  
NC  
V
1
10  
9
2OUT  
17  
16  
15  
14  
1OUT  
1IN –  
1IN +  
/GND  
+
2
3
4
5
DD  
NC  
2OUT  
2IN –  
2IN +  
8
2IN–  
NC  
1IN+  
NC  
7
9 10 11 12 13  
V
6
DD–  
NC – No internal connection  
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
equivalent schematic (each amplifier)  
COMPONENT  
COUNT  
Q22  
Q29  
Q31  
Q34  
Q36  
Transistors  
Diodes  
Resistors  
69  
5
26  
6
VB3  
Capacitors  
Q26  
Q27  
Q24  
Q32  
Q33  
VB2  
VB1  
V
DD+  
Q35  
Q25  
VB4  
Q23  
Q30  
D1  
Q37  
R10  
R9  
R3  
Q3  
R4  
R7  
Q13  
Q15  
IN–  
Q6  
Q8  
Q10  
Q18  
Q1  
Q4  
Q20  
IN+  
C2  
R5  
R6  
Q7  
Q9  
V /GND  
DD–  
C1  
OUT  
C3  
Q11  
Q12  
Q16  
Q17  
VB3  
VB2  
Q14  
Q2  
Q5  
Q21  
R8  
Q19  
R1  
R2  
VB4  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)  
Supply voltage, V  
(see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 V  
DD  
Differential input voltage, V (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±V  
ID  
DD  
DD  
Input voltage, V (any input, see Note 1): C and I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to V  
I
Input current, I (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±5 mA  
I
Output current, I . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA  
O
Total current into V  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±50 mA  
DD+  
DD–  
Total current out of V  
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited  
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table  
Operating free-air temperature range, T : C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C  
A
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 85°C  
Q suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to 125°C  
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to 125°C  
Storage temperature range, T  
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C  
stg  
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and  
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not  
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.  
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between V  
and V .  
DD+  
DD –  
2. Differential voltages are at IN+ with respect to IN–. Excessive current flows if input is brought below V  
– 0.3 V.  
DD–  
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum  
dissipation rating is not exceeded.  
DISSIPATION RATING TABLE  
T
≤ 25°C  
DERATING FACTOR  
T
= 70°C  
T
= 85°C  
T = 125°C  
A
POWER RATING  
A
A
A
PACKAGE  
POWER RATING  
ABOVE T = 25°C  
POWER RATING  
POWER RATING  
A
D
FK  
JG  
PW  
U
725 mW  
1375 mW  
1050 mW  
525 mW  
675 mW  
5.8 mW/°C  
11.0 mW/°C  
8.4 mW/°C  
4.2 mW/°C  
5.4 mW/°C  
464 mW  
880 mW  
672 mW  
336 mW  
432 mW  
377 mW  
715 mW  
546 mW  
273 mW  
350 mW  
145 mW  
275 mW  
210 mW  
105 mW  
135 mW  
recommended operating conditions  
C SUFFIX  
I SUFFIX  
Q SUFFIX  
M SUFFIX  
UNIT  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
MIN  
MAX  
Supply voltage, V  
2.7  
10  
2.7  
10  
2.7  
10  
2.7  
10  
V
V
DD±  
Input voltage range, V  
V
V
V
V
–0.8  
V
V
V
V
–0.8  
V
V
V
V
–0.8  
V
V
V
V
–0.8  
I
DD–  
DD+  
DD–  
DD+  
DD–  
DD+  
DD–  
DD+  
Common-mode input voltage, V  
IC  
–0.8  
–0.8  
–0.8  
–0.8  
V
DD–  
DD+  
DD–  
–40  
DD+  
DD–  
–40  
DD+  
DD–  
–55  
DD+  
Operating free-air temperature, T  
0
70  
85  
125  
125  
°C  
A
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
electrical characteristics at specified free-air temperature, V  
= 3 V (unless otherwise noted)  
DD  
TLV2422C  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP MAX  
300 2000  
2500  
25°C  
V
IO  
Input offset voltage  
µV  
Full range  
25°C  
to 70°C  
α
Temperature coefficient of input offset voltage  
Input offset voltage long-term drift (see Note 4)  
Input offset current  
2
µV/°C  
µV/mo  
pA  
VIO  
V
IC  
V
O
= 0,  
= 0,  
V
R
± = ±2.5 V,  
= 50 Ω  
DD  
S
25°C  
25°C  
0.003  
0.5  
60  
150  
60  
I
I
IO  
Full range  
25°C  
1
Input bias current  
pA  
IB  
Full range  
150  
0
to  
–0.25  
to  
25°C  
2.5  
2.75  
V
ICR  
Common-mode input voltage range  
|V | ≤ 5 mV,  
IO  
R
= 50 Ω  
S
V
0
to  
Full range  
2.2  
I
I
= –100 µA  
= –500 µA  
= 0,  
25°C  
25°C  
2.97  
2.75  
OH  
V
V
High-level output voltage  
V
V
OH  
OH  
Full range  
25°C  
2.5  
V
V
I
I
= 100 µA  
= 250 µA  
0.05  
0.2  
IC  
OL  
Low-level output voltage  
25°C  
OL  
= 0,  
IC  
OL  
Full range  
25°C  
0.5  
6
3
10  
‡
= 10 kΩ  
R
R
V
V
= 2.5 V,  
= 1 V to 2 V  
L
L
IC  
O
Full range  
25°C  
A
VD  
Large-signal differential voltage amplification  
V/mV  
‡
700  
= 1 MΩ  
12  
10  
r
r
Differential input resistance  
25°C  
Ω
Ω
i(d)  
i(c)  
12  
10  
Common-mode input resistance  
Common-mode input capacitance  
Closed-loop output impedance  
25°C  
c
z
f = 10 kHz  
25°C  
8
130  
83  
pF  
Ω
i(c)  
o
f = 100 kHz,  
A
= 10  
25°C  
V
25°C  
70  
70  
80  
80  
V
R
= 0 to 2.5 V, V = 1.5 V,  
O
= 50 Ω  
IC  
S
CMRR Common-mode rejection ratio  
dB  
dB  
µA  
Full range  
25°C  
95  
V
DD  
V
IC  
= 2.7 V to 8 V,  
k
Supply-voltage rejection ratio (∆V /∆V  
)
SVR  
DD  
IO  
= V  
/2,  
No load  
Full range  
25°C  
DD  
100  
150  
175  
I
Supply current  
V
O
= 1.5 V,  
No load  
DD  
Full range  
†
‡
Full range is 0°C to 70°C.  
Referenced to 2.5 V  
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T = 150°C extrapolated  
A
to T = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.  
A
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
electrical characteristics at specified free-air temperature, V  
= 3 V (unless otherwise noted)  
DD  
TLV2422I  
TLV2422AI  
MIN TYP MAX  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP MAX  
300 2000  
2500  
25°C  
300  
2
950  
V
IO  
Input offset voltage  
µV  
Full range  
1500  
Temperature  
coefficient of input  
offset voltage  
25°C  
to 70°C  
α
2
µV/°C  
VIO  
Input offset voltage  
long-term drift (see  
Note 4)  
V
IC  
V
O
= 0,  
= 0,  
V
R
± = ±2.5 V,  
= 50 Ω  
DD  
S
25°C  
0.003  
0.5  
0.003  
0.5  
µV/mo  
25°C  
Full range  
25°C  
60  
150  
60  
60  
150  
60  
I
I
Input offset current  
Input bias current  
pA  
pA  
IO  
1
1
IB  
Full range  
150  
150  
0
to  
–0.25  
to  
0
to  
–0.25  
to  
25°C  
2.5  
2.75  
2.5  
2.75  
Common-mode input  
voltage range  
V
ICR  
|V | ≤ 5 mV,  
IO  
R
= 50 Ω  
S
V
0
to  
0
to  
Full range  
2.2  
2.2  
I
I
= –100 µA  
= –500 µA  
= 0,  
25°C  
25°C  
2.97  
2.75  
2.97  
2.75  
OH  
High-level output  
voltage  
V
V
V
V
OH  
OH  
Full range  
25°C  
2.5  
2.5  
V
V
I
I
= 100 µA  
= 250 µA  
0.05  
0.2  
0.05  
0.2  
IC  
OL  
Low-level output  
voltage  
25°C  
OL  
= 0,  
IC  
OL  
Full range  
25°C  
0.5  
0.5  
6
3
10  
6
3
10  
Large-signal  
differential voltage  
amplification  
‡
= 10 kΩ  
R
R
V
V
= 2.5 V,  
= 1 V to 2 V  
L
L
IC  
O
Full range  
25°C  
A
VD  
V/mV  
‡
700  
700  
= 1 MΩ  
Differential input  
resistance  
12  
10  
12  
10  
r
r
25°C  
25°C  
25°C  
25°C  
Ω
Ω
i(d)  
i(c)  
Common-mode input  
resistance  
12  
10  
12  
10  
Common-mode input  
capacitance  
c
z
f = 10 kHz  
8
8
pF  
Ω
i(c)  
o
Closed-loop output  
impedance  
f = 100 kHz,  
A
= 10  
130  
83  
130  
83  
V
25°C  
70  
70  
70  
70  
Common-mode  
rejection ratio  
V
R
= 0 to 2.5 V, V = 1.5 V,  
O
= 50 Ω  
IC  
S
CMRR  
dB  
dB  
µA  
Full range  
Supply-voltage  
rejection ratio  
25°C  
80  
80  
95  
80  
80  
95  
V
V
= 2.7 V to 8 V,  
DD  
IC  
k
SVR  
= V  
/2,  
No load  
DD  
Full range  
(∆V /∆V  
)
DD IO  
25°C  
100  
150  
175  
100  
150  
175  
I
Supply current  
V
O
= 1.5 V,  
No load  
DD  
Full range  
†
‡
Full range is – 40°C to 85°C.  
Referenced to 2.5 V  
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T = 150°C extrapolated  
A
to T = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.  
A
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
operating characteristics at specified free-air temperature, V  
= 3 V  
DD  
TLV2422C, TLV2422I  
TLV2422AI  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP  
MAX  
25°C  
0.01  
0.02  
‡
V
C
= 1.5 V to 3.5 V,  
= 100 pF  
R
= 10 kΩ ,  
L
O
L
SR  
Slew rate at unity gain  
V/µs  
Full  
range  
‡
0.008  
f = 10 Hz  
f = 1 kHz  
25°C  
25°C  
25°C  
25°C  
25°C  
100  
23  
2.7  
4
V
n
Equivalent input noise voltage  
nV/√Hz  
f = 0.1 Hz to 1 Hz  
f = 0.1 Hz to 10 Hz  
V
I
Peak-to-peak equivalent input noise voltage  
Equivalent input noise current  
µV  
N(PP)  
0.6  
fA√Hz  
n
V
= 0.5 V to 2.5 V,  
A
= 1  
0.25%  
1.8%  
O
V
THD + N Total harmonic distortion plus noise  
Gain-bandwidth product  
25°C  
f = 1 kHz,  
R
‡
= 10 kΩ  
A
V
= 10  
L
‡
f = 10 kHz,  
R
= 10 kΩ ,  
L
25°C  
25°C  
46  
kHz  
kHz  
‡
C
= 100 pF  
L
V
= 1 V,  
A
= 1,  
O(PP)  
V
B
OM  
Maximum output-swing bandwidth  
Settling time  
8.3  
8.6  
16  
‡
‡
C
= 100 pF  
R
= 10 kΩ ,  
L
L
A
V
= –1,  
To 0.1%  
Step = 0.5 V to 2.5 V,  
t
s
25°C  
µs  
‡
= 10 kΩ ,  
= 100 pF  
R
C
L
L
To 0.01%  
‡
62°  
φ
m
Phase margin at unity gain  
Gain margin  
25°C  
25°C  
‡,  
= 10 kΩ  
‡
C = 100 pF  
L
R
L
11  
dB  
†
‡
Full range for the C version is 0°C to 70°C. Full range for the I version is –40°C to 85°C.  
Referenced to 2.5 V  
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
electrical characteristics at specified free-air temperature, V  
= 3 V (unless otherwise noted)  
DD  
TLV2422Q,  
TLV2422M  
TLV2422AQ,  
TLV2422AM  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
µV  
T
A
MIN  
TYP MAX  
MIN  
TYP MAX  
25°C  
300 2000  
2500  
300  
950  
V
IO  
Input offset voltage  
Full range  
1800  
Temperature  
α
Full range  
2
2
µV/°C  
coefficient of input  
offset voltage  
VIO  
Input offset voltage  
long-term drift (see  
Note 4)  
V
IC  
V
O
= 0,  
= 0,  
V
R
± = ±1.5 V,  
= 50 Ω  
DD  
S
25°C  
0.003  
0.5  
0.003  
0.5  
µV/mo  
25°C  
Full range  
25°C  
60  
150  
60  
60  
150  
60  
I
I
Input offset current  
Input bias current  
pA  
pA  
IO  
1
1
IB  
Full range  
300  
300  
0
to  
–0.25  
to  
0
to  
–0.25  
to  
25°C  
2.5  
2.75  
2.5  
2.75  
Common-mode input  
voltage range  
V
ICR  
|V | ≤ 5 mV,  
IO  
R
= 50 Ω  
S
V
0
to  
0
to  
Full range  
2.2  
2.2  
I
I
= –100 µA  
= –500 µA  
= 0,  
25°C  
25°C  
2.97  
2.75  
2.97  
2.75  
OH  
High-level output  
voltage  
V
V
V
V
OH  
OH  
Full range  
25°C  
2.5  
2.5  
V
V
I
I
= 100 µA  
= 250 µA  
0.05  
0.2  
0.05  
0.2  
IC  
OL  
Low-level output  
voltage  
25°C  
OL  
= 0,  
IC  
OL  
Full range  
25°C  
0.5  
0.5  
6
2
10  
6
2
10  
Large-signal  
differential voltage  
amplification  
‡
= 10 kΩ  
R
R
V
V
= 1.5 V,  
= 1 V to 2 V  
L
L
IC  
O
Full range  
25°C  
A
VD  
V/mV  
‡
700  
700  
= 1 MΩ  
Differential input  
resistance  
12  
10  
12  
10  
r
r
25°C  
25°C  
25°C  
25°C  
Ω
Ω
i(d)  
i(c)  
Common-mode input  
resistance  
12  
10  
12  
10  
Common-mode input  
capacitance  
c
z
f = 10 kHz  
8
8
pF  
Ω
i(c)  
o
Closed-loop output  
impedance  
f = 100 kHz,  
A
= 10  
130  
83  
130  
83  
V
25°C  
70  
70  
70  
70  
Common-mode  
rejection ratio  
V
R
= V  
= 50 Ω  
min, V = 1.5 V,  
O
IC  
S
ICR  
CMRR  
dB  
dB  
µA  
Full range  
Supply-voltage  
rejection ratio  
25°C  
80  
80  
95  
80  
80  
95  
V
V
= 2.7 V to 8 V,  
DD  
IC  
k
SVR  
= V  
/2,  
No load  
DD  
Full range  
(∆V /∆V  
)
DD IO  
25°C  
100  
150  
175  
100  
150  
175  
I
Supply current  
V
O
= 1.5 V,  
No load  
DD  
Full range  
†
‡
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part.  
Referenced to 1.5 V  
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T = 150°C extrapolated  
A
to T = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.  
A
8
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
operating characteristics at specified free-air temperature, V  
= 3 V  
DD  
TLV2422Q,  
TLV2422M,  
TLV2422AQ,  
TLV2422AM  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP  
MAX  
25°C  
0.01  
0.02  
‡
V
C
= 1.1 V to 1.9 V,  
= 100 pF  
R
= 10 kΩ ,  
L
O
L
SR  
Slew rate at unity gain  
V/µs  
Full  
range  
‡
0.008  
f = 10 Hz  
f = 1 kHz  
25°C  
25°C  
25°C  
25°C  
25°C  
100  
23  
2.7  
4
V
n
Equivalent input noise voltage  
nV/√Hz  
f = 0.1 Hz to 1 Hz  
f = 0.1 Hz to 10 Hz  
V
I
Peak-to-peak equivalent input noise voltage  
Equivalent input noise current  
µV  
N(PP)  
0.6  
fA√Hz  
n
V
= 0.5 V to 2.5 V,  
A
= 1  
0.25%  
1.8%  
O
V
THD + N Total harmonic distortion plus noise  
Gain-bandwidth product  
25°C  
f = 1 kHz,  
R
‡
= 10 kΩ  
A
V
= 10  
L
‡
f = 10 kHz,  
R
= 10 kΩ ,  
L
25°C  
25°C  
46  
kHz  
kHz  
‡
C
= 100 pF  
L
V
= 1 V,  
A
= 1,  
O(PP)  
V
B
OM  
Maximum output-swing bandwidth  
Settling time  
8.3  
8.6  
16  
‡
‡
C
= 100 pF  
R
= 10 kΩ ,  
L
L
A
= –1,  
V
To 0.1%  
Step = 0.5 V to 2.5 V,  
t
s
25°C  
µs  
‡
= 10 kΩ ,  
= 100 pF  
R
C
L
L
To 0.01%  
‡
62°  
φ
m
Phase margin at unity gain  
Gain margin  
25°C  
25°C  
‡,  
= 10 kΩ  
‡
C = 100 pF  
L
R
L
11  
dB  
†
‡
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part.  
Referenced to 1.5 V  
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
electrical characteristics at specified free-air temperature, V  
= 5 V (unless otherwise noted)  
DD  
TLV2422C  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP MAX  
300 2000  
2500  
25°C  
V
IO  
Input offset voltage  
µV  
Full range  
25°C  
to 70°C  
α
Temperature coefficient of input offset voltage  
Input offset voltage long-term drift (see Note 4)  
Input offset current  
2
µV/°C  
µV/mo  
pA  
VIO  
V
IC  
V
O
= 0,  
= 0,  
V
R
± = ±2.5 V,  
= 50 Ω  
DD  
S
25°C  
25°C  
0.003  
0.5  
60  
150  
60  
I
I
IO  
Full range  
25°C  
1
Input bias current  
pA  
IB  
Full range  
150  
0
to  
–0.25  
to  
25°C  
4.5  
4.75  
V
ICR  
Common-mode input voltage range  
|V | ≤ 5 mV,  
IO  
R
= 50 Ω  
S
V
0
to  
Full range  
4.2  
I
I
= –100 µA  
= –1 mA  
= 2.5 V,  
25°C  
25°C  
4.97  
4.75  
OH  
V
V
High-level output voltage  
4.5  
V
V
OH  
OH  
Full range  
25°C  
4.25  
V
V
I
I
= 100 µA  
= 500 µA  
0.04  
0.15  
IC  
OL  
Low-level output voltage  
25°C  
OL  
= 2.5 V,  
IC  
OL  
Full range  
25°C  
0.5  
8
5
12  
‡
= 10 kΩ  
R
R
V
V
= 2.5 V,  
= 1 V to 4 V  
L
L
IC  
O
Full range  
25°C  
A
VD  
Large-signal differential voltage amplification  
V/mV  
‡
1000  
= 1 MΩ  
12  
10  
r
r
Differential input resistance  
25°C  
Ω
Ω
i(d)  
i(c)  
12  
10  
Common-mode input resistance  
Common-mode input capacitance  
Closed-loop output impedance  
25°C  
c
z
f = 10 kHz  
25°C  
8
130  
90  
pF  
Ω
i(c)  
o
f = 100 kHz,  
A
= 10  
25°C  
V
25°C  
70  
70  
80  
80  
V
R
= 0 to 4.5 V, V = 2.5 V,  
O
= 50 Ω  
IC  
S
CMRR Common-mode rejection ratio  
dB  
dB  
µA  
Full range  
25°C  
95  
V
DD  
V
IC  
= 4.4 V to 8 V,  
k
Supply-voltage rejection ratio (∆V /∆V  
)
SVR  
DD  
IO  
= V  
/2,  
No load  
Full range  
25°C  
DD  
100  
150  
175  
I
Supply current  
V
O
= 2.5 V,  
No load  
DD  
Full range  
†
‡
Full range is 0°C to 70°C.  
Referenced to 2.5 V  
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T = 150°C extrapolated  
A
to T = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.  
A
10  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
electrical characteristics at specified free-air temperature, V  
= 5 V (unless otherwise noted)  
DD  
TLV2422I  
TLV2422AI  
MIN TYP MAX  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP MAX  
300 2000  
2500  
25°C  
300  
2
950  
V
IO  
Input offset voltage  
µV  
Full range  
1500  
Temperature  
coefficient of input  
offset voltage  
25°C  
to 70°C  
α
2
µV/°C  
VIO  
Input offset voltage  
long-term drift (see  
Note 4)  
V
IC  
V
O
= 0,  
= 0,  
V
R
± = ±2.5 V,  
= 50 Ω  
DD  
S
25°C  
0.003  
0.5  
0.003  
0.5  
µV/mo  
25°C  
Full range  
25°C  
60  
150  
60  
60  
150  
60  
I
I
Input offset current  
Input bias current  
pA  
pA  
IO  
1
1
IB  
Full range  
150  
150  
0
to  
–0.25  
to  
0
to  
–0.25  
to  
25°C  
4.5  
4.75  
4.5  
4.75  
Common-mode input  
voltage range  
V
ICR  
|V | ≤ 5 mV,  
IO  
R
= 50 Ω  
S
V
0
to  
0
to  
Full range  
4.2  
4.2  
I
I
= –100 µA  
= –1 mA  
= 2.5 V,  
25°C  
25°C  
4.97  
4.75  
4.97  
4.75  
OH  
High-level output  
voltage  
V
V
4.5  
4.5  
V
V
OH  
OH  
Full range  
25°C  
4.25  
4.25  
V
V
I
I
= 100 µA  
= 500 µA  
0.04  
0.15  
0.04  
0.15  
IC  
OL  
Low-level output  
voltage  
25°C  
OL  
= 2.5 V,  
IC  
OL  
Full range  
25°C  
0.5  
0.5  
8
5
12  
8
5
12  
Large-signal  
differential voltage  
amplification  
‡
= 10 kΩ  
R
R
V
V
= 2.5 V,  
= 1 V to 4 V  
L
L
IC  
O
Full range  
25°C  
A
VD  
V/mV  
‡
1000  
1000  
= 1 MΩ  
Differential input  
resistance  
12  
10  
12  
10  
r
r
25°C  
25°C  
25°C  
25°C  
Ω
Ω
i(d)  
i(c)  
Common-mode input  
resistance  
12  
10  
12  
10  
Common-mode input  
capacitance  
c
z
f = 10 kHz  
8
8
pF  
Ω
i(c)  
o
Closed-loop output  
impedance  
f = 100 kHz,  
A
= 10  
130  
90  
130  
90  
V
25°C  
70  
70  
70  
70  
Common-mode  
rejection ratio  
V
R
= 0 to 4.5 V, V = 2.5 V,  
O
= 50 Ω  
IC  
S
CMRR  
dB  
dB  
µA  
Full range  
Supply-voltage  
rejection ratio  
25°C  
80  
80  
95  
80  
80  
95  
V
V
= 4.4 V to 8 V,  
DD  
IC  
k
SVR  
= V  
/2,  
No load  
DD  
Full range  
(∆V /∆V  
)
DD IO  
25°C  
100  
150  
175  
100  
150  
175  
I
Supply current  
V
O
= 2.5 V,  
No load  
DD  
Full range  
†
‡
Full range is – 40°C to 85°C.  
Referenced to 2.5 V  
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T = 150°C extrapolated  
A
to T = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.  
A
11  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
operating characteristics at specified free-air temperature, V  
= 5 V  
DD  
TLV2422C, TLV2422I  
TLV2422AI  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP  
MAX  
25°C  
0.01  
0.02  
‡
V
C
= 1.5 V to 3.5 V,  
= 100 pF  
R
= 10 kΩ ,  
L
O
L
SR  
Slew rate at unity gain  
V/µs  
Full  
range  
‡
0.008  
f = 10 Hz  
f = 1 kHz  
25°C  
25°C  
25°C  
25°C  
25°C  
100  
18  
V
n
Equivalent input noise voltage  
nV/√Hz  
f = 0.1 Hz to 1 Hz  
f = 0.1 Hz to 10 Hz  
1.9  
2.8  
0.6  
V
I
Peak-to-peak equivalent input noise voltage  
Equivalent input noise current  
µV  
N(PP)  
fA√Hz  
n
V
= 1.5 V to 3.5 V,  
A
= 1  
0.24%  
1.7%  
O
V
THD + N Total harmonic distortion plus noise  
Gain-bandwidth product  
25°C  
f = 1 kHz,  
R
‡
= 10 kΩ  
A
V
= 10  
L
‡
f = 10 kHz,  
R
=10 kΩ ,  
L
25°C  
25°C  
52  
kHz  
kHz  
‡
C
= 100 pF  
L
V
= 2 V,  
A
= 1,  
O(PP)  
V
B
OM  
Maximum output-swing bandwidth  
Settling time  
5.3  
8.5  
‡
‡
C
= 100 pF  
R
= 10 kΩ ,  
L
L
A
= –1,  
V
To 0.1%  
Step = 1.5 V to 3.5 V,  
t
s
25°C  
µs  
‡
= 10 kΩ ,  
= 100 pF  
R
C
L
L
To 0.01%  
15.5  
‡
66°  
φ
m
Phase margin at unity gain  
Gain margin  
25°C  
25°C  
‡,  
= 10 kΩ  
‡
C = 100 pF  
L
R
L
11  
dB  
†
‡
Full range for the C version is 0°C to 70°C. Full range for the I version is –40°C to 85°C.  
Referenced to 2.5 V  
12  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
electrical characteristics at specified free-air temperature, V  
= 5 V (unless otherwise noted)  
DD  
TLV2422Q,  
TLV2422M  
TLV2422AQ,  
TLV2422AM  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
µV  
T
A
MIN  
TYP MAX  
MIN  
TYP MAX  
25°C  
300 2000  
2500  
300  
950  
V
IO  
Input offset voltage  
Full range  
1800  
Temperature  
α
Full range  
2
2
µV/°C  
coefficient of input  
offset voltage  
VIO  
Input offset voltage  
long-term drift (see  
Note 4)  
V
IC  
V
O
= 0,  
= 0,  
V
R
± = ±2.5 V,  
= 50 Ω  
DD  
S
25°C  
0.003  
0.5  
0.003  
0.5  
µV/mo  
25°C  
Full range  
25°C  
60  
150  
60  
60  
150  
60  
I
I
Input offset current  
Input bias current  
pA  
pA  
IO  
1
1
IB  
Full range  
300  
300  
0
to  
–0.25  
to  
0
to  
–0.25  
to  
25°C  
4.5  
4.75  
4.5  
4.75  
Common-mode input  
voltage range  
V
ICR  
|V | ≤ 5 mV,  
IO  
R
= 50 Ω  
S
V
0
to  
0
to  
Full range  
4.2  
4.2  
I
I
= –100 µA  
= –1 mA  
= 2.5 V,  
25°C  
25°C  
4.97  
4.75  
4.97  
4.75  
OH  
High-level output  
voltage  
V
V
V
V
OH  
OH  
Full range  
25°C  
4.5  
4.5  
V
V
I
I
= 100 µA  
= 500 µA  
0.04  
0.15  
0.04  
0.15  
IC  
OL  
Low-level output  
voltage  
25°C  
OL  
= 2.5 V,  
IC  
OL  
Full range  
25°C  
0.5  
0.5  
8
3
12  
8
3
12  
Large-signal  
differential voltage  
amplification  
‡
= 10 kΩ  
R
R
V
V
= 2.5 V,  
= 1 V to 4 V  
L
L
IC  
O
Full range  
25°C  
A
VD  
V/mV  
‡
1000  
1000  
= 1 MΩ  
Differential input  
resistance  
12  
10  
12  
10  
r
r
25°C  
25°C  
25°C  
25°C  
Ω
Ω
i(d)  
i(c)  
Common-mode input  
resistance  
12  
10  
12  
10  
Common-mode input  
capacitance  
c
z
f = 10 kHz  
8
8
pF  
Ω
i(c)  
o
Closed-loop output  
impedance  
f = 100 kHz,  
A
= 10  
130  
90  
130  
90  
V
25°C  
70  
70  
70  
70  
Common-mode  
rejection ratio  
V
R
= V  
= 50 Ω  
min, V = 2.5 V,  
O
IC  
S
ICR  
CMRR  
dB  
dB  
µA  
Full range  
Supply-voltage  
rejection ratio  
25°C  
80  
80  
95  
80  
80  
95  
V
V
= 4.4 V to 8 V,  
DD  
IC  
k
SVR  
= V  
/2,  
No load  
DD  
Full range  
(∆V /∆V  
)
DD IO  
25°C  
100  
150  
175  
100  
150  
175  
I
Supply current  
V
O
= 2.5 V,  
No load  
DD  
Full range  
†
‡
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part.  
Referenced to 2.5 V  
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T = 150°C extrapolated  
A
to T = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.  
A
13  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
operating characteristics at specified free-air temperature, V  
= 5 V  
DD  
TLV2422Q,  
TLV2422M,  
TLV2422AQ,  
TLV2422AM  
†
PARAMETER  
TEST CONDITIONS  
UNIT  
T
A
MIN  
TYP  
MAX  
25°C  
0.01  
0.02  
‡
V
C
= 1.5 V to 3.5 V,  
= 100 pF  
R
= 10 kΩ ,  
L
O
L
SR  
Slew rate at unity gain  
V/µs  
Full  
range  
‡
0.008  
f = 10 Hz  
f = 1 kHz  
25°C  
25°C  
25°C  
25°C  
25°C  
100  
18  
V
n
Equivalent input noise voltage  
nV/√Hz  
f = 0.1 Hz to 1 Hz  
f = 0.1 Hz to 10 Hz  
1.9  
2.8  
0.6  
V
I
Peak-to-peak equivalent input noise voltage  
Equivalent input noise current  
µV  
N(PP)  
fA√Hz  
n
V
= 1.5 V to 3.5 V,  
A
= 1  
0.24%  
1.7%  
O
V
THD + N Total harmonic distortion plus noise  
Gain-bandwidth product  
25°C  
f = 1 kHz,  
R
‡
= 10 kΩ  
A
V
= 10  
L
‡
f = 10 kHz,  
R
=10 kΩ ,  
L
25°C  
25°C  
52  
kHz  
kHz  
‡
C
= 100 pF  
L
V
= 2 V,  
A
= 1,  
O(PP)  
V
B
OM  
Maximum output-swing bandwidth  
Settling time  
5.3  
8.5  
‡
‡
C
= 100 pF  
R
= 10 kΩ ,  
L
L
A
= –1,  
V
To 0.1%  
Step = 1.5 V to 3.5 V,  
t
s
25°C  
µs  
‡
= 10 kΩ ,  
= 100 pF  
R
C
L
L
To 0.01%  
15.5  
‡
66°  
φ
m
Phase margin at unity gain  
Gain margin  
25°C  
25°C  
‡,  
= 10 kΩ  
‡
C = 100 pF  
L
R
L
11  
dB  
†
‡
Full range is –40°C to 125°C for Q level part, –55°C to 125°C for M level part.  
Referenced to 2.5 V  
14  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
Table of Graphs  
FIGURE  
Distribution  
vs Common-mode input voltage  
2,3  
4,5  
V
IO  
Input offset voltage  
α
Input offset voltage temperature coefficient  
Input bias and input offset currents  
High-level output voltage  
Distribution  
6,7  
8
VIO  
I
/I  
vs Free-air temperature  
vs High-level output current  
vs Low-level output current  
vs Frequency  
IB IO  
V
V
V
9,11  
10,12  
13  
OH  
Low-level output voltage  
OL  
Maximum peak-to-peak output voltage  
O(PP)  
vs Supply voltage  
vs Free-air temperature  
14  
15  
I
Short-circuit output current  
OS  
V
ID  
Differential input voltage  
vs Output voltage  
vs Load resistance  
16,17  
18  
Differential gain  
Large-signal differential voltage amplification  
Differential voltage amplification  
Output impedance  
vs Frequency  
vs Free-air temperature  
19,20  
21,22  
A
VD  
z
vs Frequency  
23,24  
o
vs Frequency  
vs Free-air temperature  
25  
26  
CMRR  
Common-mode rejection ratio  
vs Frequency  
vs Free-air temperature  
27,28  
29  
k
Supply-voltage rejection ratio  
Supply current  
SVR  
I
vs Supply voltage  
30  
DD  
vs Load capacitance  
vs Free-air temperature  
31  
32  
SR  
Slew rate  
V
V
V
V
V
Inverting large-signal pulse response  
Voltage-follower large-signal pulse response  
Inverting small-signal pulse response  
Voltage-follower small-signal pulse response  
Equivalent input noise voltage  
33,34  
35,36  
37,38  
39,40  
41, 42  
43  
O
O
O
O
n
vs Frequency  
Noise voltage (referred to input)  
Over a 10-second period  
vs Frequency  
THD + N  
Total harmonic distortion plus noise  
44,45  
vs Supply voltage  
vs Free-air temperature  
46  
47  
Gain-bandwidth product  
Phase margin  
vs Frequency  
vs Load capacitance  
19,20  
48  
φ
m
Gain margin  
vs Load capacitance  
vs Load capacitance  
49  
50  
B
1
Unity-gain bandwidth  
15  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
DISTRIBUTION OF TLV2422  
INPUT OFFSET VOLTAGE  
DISTRIBUTION OF TLV2422  
INPUT OFFSET VOLTAGE  
18  
16  
14  
12  
10  
8
20  
15  
10  
5
452 Amplifiers from 1 Wafer Lot  
454 Amplifiers from 1 Wafer Lot  
V
R
T
A
= 3 V  
= 10 kΩ  
= 25°C  
V
R
L
= 5 V  
= 10 kΩ  
T = 25°C  
A
DD  
L
DD  
6
4
2
0
0
–0.4–0.3–0.2 –0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7  
–0.4 –0.3 –0.2 –0.1  
0
0.1 0.2 0.3 0.4 0.5 0.6  
V
IO  
– Input Offset Voltage – mV  
V
IO  
– Input Offset Voltage – mV  
Figure 2  
Figure 3  
INPUT OFFSET VOLTAGE  
vs  
COMMON-MODE INPUT VOLTAGE  
INPUT OFFSET VOLTAGE  
vs  
COMMON-MODE INPUT VOLTAGE  
2
2
1.5  
1
V
DD  
= 3 V  
V
DD  
= 5 V  
1.5  
1
0.5  
0
0.5  
0
–0.5  
–1  
–0.5  
–1  
–1.5  
–2  
–1.5  
–2  
–0.5  
0
0.5  
1
1.5  
2
2.5  
3
–0.5  
0
0.5  
1
1.5  
2
2.5  
3
3.5  
4
4.5  
5
V
IC  
– Common-Mode Input Voltage – V  
V
IC  
– Common-Mode Input Voltage – V  
Figure 4  
Figure 5  
16  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
DISTRIBUTION OF TLV2422 INPUT OFFSET  
VOLTAGE TEMPERATURE COEFFICIENT  
DISTRIBUTION OF TLV2422 INPUT OFFSET  
VOLTAGE TEMPERATURE COEFFICIENT  
25  
25  
20  
32 Amplifiers From 1 Wafer Lot  
32 Amplifiers From 1 Wafer Lot  
V = ± 1.5 V  
DD  
T = 25°C to 125°C  
V
T
= ± 2.5 V  
DD  
= 25°C to 125°C  
A
A
20  
15  
15  
10  
5
10  
5
0
0
–4  
–3  
–2  
–1  
0
1
2
3
4
–4  
–3  
–2  
–1  
0
1
2
3
4
α
– Temperature Coefficient – µV/°C  
α
VIO  
– Temperature Coefficient – µV/°C  
VIO  
Figure 6  
Figure 7  
HIGH-LEVEL OUTPUT VOLTAGE  
vs  
INPUT BIAS AND INPUT OFFSET CURRENTS  
vs  
HIGH-LEVEL OUTPUT CURRENT  
FREE-AIR TEMPERATURE  
3
200  
V
DD  
= 3 V  
V
DD  
= ±2.5 V  
2.5  
160  
120  
T
A
= 85°C  
2
T
A
= 0°C  
I
IB  
1.5  
T
A
= 125°C  
80  
40  
0
1
T
= 25°C  
A
0.5  
0
I
IO  
0
3
6
9
12  
15  
–55  
–40  
0
25  
70  
85  
125  
I
– High-Level Output Current – mA  
T
A
– Free-Air Temperature – °C  
OH  
Figure 8  
Figure 9  
17  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
LOW-LEVEL OUTPUT VOLTAGE  
vs  
LOW-LEVEL OUTPUT CURRENT  
HIGH-LEVEL OUTPUT VOLTAGE  
vs  
HIGH-LEVEL OUTPUT CURRENT  
1.6  
1.4  
1.2  
1
5
V
DD  
= 3 V  
V
= 5 V  
DD  
T
A
= –40°C  
4
3
T
A
= 25°C  
T
A
= 125°C  
T
= 85°C  
A
0.8  
0.6  
0.4  
0.2  
0
2
1
0
T
= 85°C  
A
T
= 25°C  
A
T
= 125°C  
A
T
= –40°C  
A
0
1
2
3
4
5
0
4
8
12 16 20 24 28 32 36 40  
I
– Low-Level Output Current – mA  
OL  
I
– High-Level Output Current – mA  
OH  
Figure 10  
Figure 11  
LOW-LEVEL OUTPUT VOLTAGE  
vs  
LOW-LEVEL OUTPUT CURRENT  
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE  
vs  
FREQUENCY  
1.2  
5
4
3
2
1
0
V
DD  
= 5 V  
R
T
A
= 10 kΩ  
= 25°C  
L
V
= 5 V  
DD  
DD  
1
0.8  
0.6  
0.4  
0.2  
0
T
A
= 125°C  
V
= 3 V  
T
A
= 85°C  
T
= 25°C  
A
T
= –40°C  
A
0
1
2
3
4
5
2
3
10  
4
10  
5
10  
6
10  
10  
I
– Low-Level Output Current – mA  
OL  
f – Frequency – Hz  
Figure 12  
Figure 13  
18  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
SHORT-CIRCUIT OUTPUT CURRENT  
SHORT-CIRCUIT OUTPUT CURRENT  
vs  
vs  
SUPPLY VOLTAGE  
FREE-AIR TEMPERATURE  
30  
25  
20  
15  
10  
5
8
V
V
T
= V /2  
DD  
DD  
= 25°C  
O
IC  
A
V
ID  
= –100 mV  
= V /2  
6
4
2
V
DD  
= 5 V  
0
–2  
–4  
–6  
–8  
0
–5  
–10  
–15  
–20  
–25  
–30  
V
ID  
= 100 mV  
2
3
4
5
6
7
8
9
10  
–55  
–40  
0
25  
70  
85  
125  
V
DD  
– Supply Voltage – V  
T
A
– Free-Air Temperature – °C  
Figure 14  
Figure 15  
DIFFERENTIAL INPUT VOLTAGE  
DIFFERENTIAL INPUT VOLTAGE  
vs  
vs  
OUTPUT VOLTAGE  
OUTPUT VOLTAGE  
1000  
800  
1000  
800  
V
R
T
A
= 3 V  
= 10 kΩ  
= 25°C  
DD  
L
V
= 5 V  
DD  
L
R = 10 kΩ  
T = 25°C  
A
600  
400  
200  
0
600  
400  
200  
0
–200  
–200  
–400  
–600  
–400  
–600  
–800  
–800  
–1000  
–1000  
0
0.5  
1
1.5  
2
2.5  
3
0
1
2
3
4
5
V
O
– Output Voltage – V  
V
O
– Output Voltage – V  
Figure 16  
Figure 17  
19  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
DIFFERENTIAL GAIN  
vs  
LOAD RESISTANCE  
10000  
1000  
V
ID  
= 5 V  
V
ID  
= 3 V  
100  
10  
1
10  
100  
1000  
R
– Load Resistance – kΩ  
L
Figure 18  
LARGE-SIGNAL DIFFERENTIAL VOLTAGE  
AMPLIFICATION AND PHASE MARGIN  
vs  
FREQUENCY  
50  
40  
180  
135  
90  
V
R
C
= 3 V  
= 10 kΩ  
= 100 pF  
DD  
L
L
30  
20  
PHASE  
10  
45  
0
GAIN  
–10  
–20  
–30  
–40  
–50  
0
–45  
–90  
3
10  
4
10  
5
10  
6
10  
f – Frequency – Hz  
Figure 19  
20  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
LARGE-SIGNAL DIFFERENTIAL VOLTAGE  
AMPLIFICATION AND PHASE MARGIN  
vs  
FREQUENCY  
60  
50  
180  
135  
90  
45  
0
V
R
C
= 5 V  
= 10 kΩ  
= 100 pF  
DD  
L
L
40  
30  
PHASE  
20  
10  
0
GAIN  
–10  
–20  
–30  
–40  
–45  
–90  
3
10  
4
10  
5
10  
6
10  
f – Frequency – Hz  
Figure 20  
DIFFERENTIAL VOLTAGE AMPLIFICATION  
DIFFERENTIAL VOLTAGE AMPLIFICATION  
vs  
vs  
FREE-AIR TEMPERATURE  
FREE-AIR TEMPERATURE  
10000  
1000  
100  
10  
10000  
1000  
100  
10  
V
DD  
= 3 V  
V
DD  
= 5 V  
R
= 1 MΩ  
L
R = 1 MΩ  
L
R
= 10 kΩ  
R
= 10 kΩ  
L
L
1
1
–75 –50 –25  
0
25  
50  
75 100 125  
–75 –50 –25  
0
25  
50  
75 100 125  
T
A
– Free-Air Temperature – °C  
T
A
– Free-Air Temperature – °C  
Figure 21  
Figure 22  
21  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
OUTPUT IMPEDANCE  
vs  
OUTPUT IMPEDANCE  
vs  
FREQUENCY  
FREQUENCY  
1000  
1000  
A
V
= 100  
A
V
= 100  
A
V
= 10  
A
V
= 10  
100  
10  
1
100  
10  
1
A
V
= 1  
A
V
= 1  
V
T
A
= 3 V  
DD  
= 25°C  
V
= 5 V  
DD  
T = 25°C  
A
2
10  
3
10  
4
10  
5
10  
2
10  
3
10  
4
10  
5
10  
f – Frequency – Hz  
f – Frequency – Hz  
Figure 23  
Figure 24  
COMMON-MODE REJECTION RATIO  
COMMON-MODE REJECTION RATIO  
vs  
vs  
FREQUENCY  
FREE-AIR TEMPERATURE  
100  
80  
94  
93  
T
A
= 25°C  
92  
91  
90  
V
= 5 V  
= 3 V  
DD  
60  
V
DD  
89  
88  
V
DD  
= 5 V  
40  
V
DD  
= 3 V  
87  
86  
20  
0
85  
84  
2
10  
3
10  
4
10  
5
10  
6
10  
–55  
–40  
0
25  
70  
85  
125  
f – Frequency – Hz  
T
A
– Free-Air Temperature – °C  
Figure 25  
Figure 26  
22  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
SUPPLY-VOLTAGE REJECTION RATIO  
SUPPLY-VOLTAGE REJECTION RATIO  
vs  
vs  
FREQUENCY  
FREQUENCY  
120  
100  
80  
120  
100  
80  
V
T
A
= 3 V  
DD  
= 25°C  
V
= 5 V  
DD  
T = 25°C  
A
K
SVR+  
K
SVR+  
60  
40  
20  
0
60  
40  
20  
0
K
SVR–  
K
SVR–  
1
10  
2
10  
3
10  
4
10  
5
10  
6
10  
1
10  
2
10  
3
4
10  
5
10  
6
10  
10  
f – Frequency – Hz  
f – Frequency – Hz  
Figure 27  
Figure 28  
SUPPLY-VOLTAGE REJECTION RATIO  
SUPPLY CURRENT  
vs  
SUPPLY VOLTAGE  
vs  
FREE-AIR TEMPERATURE  
100  
160  
V
DD  
= 2.7 V to 8 V  
V
= V /2  
DD  
O
T
A
= –40°C  
No Load  
140  
120  
100  
98  
96  
T
A
= 25°C  
T
A
= 85°C  
80  
60  
40  
20  
0
94  
92  
90  
–55  
–40  
0
25  
70  
85  
125  
0
1
2
3
4
5
6
7
8
9
10  
T
A
– Free-Air Temperature – °C  
V
DD  
– Supply Voltage – V  
Figure 29  
Figure 30  
23  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
SLEW RATE  
vs  
LOAD CAPACITANCE  
SLEW RATE  
vs  
FREE-AIR TEMPERATURE  
0.03  
0.025  
0.02  
30  
V
= 3 V  
DD  
= –1  
V
R
C
= 5 V  
DD  
L
L
A
V
A
= 10 kΩ  
= 100 pF  
= 1  
T
= 25°C  
25  
20  
A
V
SR–  
SR+  
0.015  
0.01  
15  
10  
5
0.005  
0
2
10  
3
10  
4
10  
5
10  
6
10  
–55  
–40  
0
25  
70  
85  
125  
C
– Load Capacitance – pF  
L
T
A
– Free-Air Temperature – °C  
Figure 31  
Figure 32  
INVERTING LARGE-SIGNAL  
PULSE RESPONSE  
INVERTING LARGE-SIGNAL  
PULSE RESPONSE  
2000  
1500  
1000  
500  
4
3
2
1
0
0
–500  
–1000  
–1  
–2  
V
= 3 V  
= 10 kΩ  
= 100 pF  
= –1  
DD  
L
L
V
R
C
= 5 V  
= 10 kΩ  
= 100 pF  
= –1  
DD  
L
L
R
C
A
–1500  
–2000  
–3  
V
A
A
V
T
= 25°C  
T
= 25°C  
A
–4  
–1000  
–1000  
–600  
–200  
0
200  
600  
1000  
–600  
–200  
0
200  
600  
1000  
t – Time – µs  
t – Time – µs  
Figure 33  
Figure 34  
24  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
VOLTAGE-FOLLOWER LARGE-SIGNAL  
PULSE RESPONSE  
VOLTAGE-FOLLOWER LARGE-SIGNAL  
PULSE RESPONSE  
2000  
1500  
1000  
500  
2000  
1500  
1000  
500  
V
R
C
= 3 V  
= 10 kΩ  
= 100 pF  
= 1  
= 25°C  
DD  
L
L
A
V
A
T
0
0
–500  
–1000  
–500  
–1000  
V
R
C
= 5 V  
= 10 kΩ  
= 100 pF  
= 1  
DD  
L
L
–1500  
–2000  
–1500  
–2000  
A
V
T
= 25°C  
A
–1000  
–600  
–200  
0
200  
600  
1000  
–1000  
–600  
–200  
0
200  
600  
1000  
t – Time – µs  
t – Time – µs  
Figure 35  
Figure 36  
INVERTING SMALL-SIGNAL  
PULSE RESPONSE  
INVERTING SMALL-SIGNAL  
PULSE RESPONSE  
400  
300  
200  
100  
0
400  
300  
200  
100  
0
V
R
C
= 3 V  
DD  
L
L
V
R
C
= 5 V  
DD  
L
L
= 10 kΩ  
= 100 pF  
= –1  
= 10 kΩ  
= 100 pF  
= –1  
A
V
A
A
V
A
T
= 25°C  
T
= 25°C  
–100  
–200  
–100  
–200  
–300  
–400  
–300  
–400  
–5  
–4 –3 –2 –1  
0
1
2
3
4
5
–5  
–4 –3 –2 –1  
0
1
2
3
4
5
t – Time – µs  
t – Time – µs  
Figure 37  
Figure 38  
25  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
VOLTAGE-FOLLOWER SMALL-SIGNAL  
PULSE RESPONSE  
VOLTAGE-FOLLOWER SMALL-SIGNAL  
PULSE RESPONSE  
400  
300  
200  
100  
0
400  
300  
200  
100  
0
V
R
C
= 3 V  
= 10 kΩ  
= 100 pF  
= 1  
DD  
L
L
V
R
C
= 5 V  
= 10 kΩ  
= 100 pF  
= 1  
DD  
L
L
A
V
A
A
V
T
= 25°C  
T
= 25°C  
A
–100  
–200  
–100  
–200  
–300  
–400  
–300  
–400  
–5 –4 –3 –2 –1  
0
1
2
3
4
5
–5 –4 –3 –2 –1  
0
1
2
3
4
5
t – Time – µs  
t – Time – µs  
Figure 39  
Figure 40  
EQUIVALENT INPUT NOISE VOLTAGE  
EQUIVALENT INPUT NOISE VOLTAGE  
vs  
vs  
FREQUENCY  
FREQUENCY  
120  
100  
120  
100  
V
T
A
= 3 V  
DD  
= 25°C  
V
= 5 V  
DD  
T = 25°C  
A
80  
60  
40  
20  
0
80  
60  
40  
20  
0
2
10  
3
10  
4
10  
10  
2
10  
3
10  
4
10  
10  
f – Frequency – Hz  
f – Frequency – Hz  
Figure 41  
Figure 42  
26  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
NOISE VOLTAGE OVER A 10-SECOND PERIOD  
1000  
Over a 10 Second Period  
V
= 5 V  
DD  
f = 0.1 Hz to 10 Hz  
800  
600  
400  
T
A
= 25°C  
200  
0
–200  
–400  
–600  
–800  
–1000  
–1200  
0
1
2
3
4
5
6
7
8
9
10  
t – Time – s  
Figure 43  
TOTAL HARMONIC DISTORTION PLUS NOISE  
TOTAL HARMONIC DISTORTION PLUS NOISE  
vs  
vs  
FREQUENCY  
FREQUENCY  
100  
10  
1
100  
10  
V
R
T
A
= 3 V  
= 10 kΩ  
= 25°C  
DD  
L
V
R
L
= 5 V  
= 10 kΩ  
T = 25°C  
A
DD  
A
V
= 10  
1
A
V
= 10  
A
V
= 1  
0.1  
A
V
= 1  
0.1  
0.01  
0.01  
0.001  
1
10  
2
10  
3
10  
4
10  
5
10  
1
10  
2
10  
3
10  
4
10  
5
10  
f – Frequency – Hz  
f – Frequency – Hz  
Figure 44  
Figure 45  
27  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
GAIN-BANDWIDTH PRODUCT  
GAIN-BANDWIDTH PRODUCT  
vs  
FREE-AIR TEMPERATURE  
vs  
SUPPLY VOLTAGE  
80  
70  
60  
50  
40  
30  
20  
80  
70  
R
C
= 10 kΩ  
= 100 pF  
L
L
V
R
C
= 5 V  
= 10 kΩ  
= 100 pF  
DD  
L
L
f = 10 kHz  
T
A
= 25°C  
f = 10 kHz  
60  
50  
40  
30  
20  
10  
0
3
4
5
6
7
8
–50  
–25  
0
25  
50  
75  
100  
125  
V
DD  
– Supply Voltage – V  
T
A
– Free-Air Temperature – °C  
Figure 46  
Figure 47  
PHASE MARGIN  
vs  
LOAD CAPACITANCE  
GAIN MARGIN  
vs  
LOAD CAPACITANCE  
120  
100  
80  
40  
30  
R
T
A
= 10 kΩ  
= 25°C  
L
R
= 500  
R
T
= 10 kΩ  
= 25°C  
null  
L
A
R
= 500  
null  
R
= 1000  
null  
R
R
= 1000  
= 200  
null  
null  
60  
20  
10  
0
40  
R
= 100  
null  
R
= 200  
null  
R
2
= 100  
null  
20  
0
R
= 0  
null  
R
= 0  
null  
3
10  
4
5
10  
10  
10  
10  
2
3
4
5
10  
10  
10  
10  
10  
C
– Load Capacitance – pF  
L
C
– Load Capacitance – pF  
L
Figure 48  
Figure 49  
28  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
TLV2422, TLV2422A  
Advanced LinCMOS RAIL-TO-RAIL OUTPUT  
WIDE-INPUT-VOLTAGE MICROPOWER DUAL OPERATIONAL AMPLIFIERS  
SLOS199C – SEPTEMBER1997 – REVISED APRIL 2001  
TYPICAL CHARACTERISTICS  
UNITY-GAIN BANDWIDTH  
vs  
LOAD CAPACITANCE  
60  
50  
40  
30  
20  
10  
0
2
10  
3
10  
4
10  
5
10  
10  
C
– Load Capacitance – pF  
L
Figure 50  
29  
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265  
PACKAGE OPTION ADDENDUM  
www.ti.com  
23-Apr-2022  
PACKAGING INFORMATION  
Orderable Device  
Status Package Type Package Pins Package  
Eco Plan  
Lead finish/  
Ball material  
MSL Peak Temp  
Op Temp (°C)  
Device Marking  
Samples  
Drawing  
Qty  
(1)  
(2)  
(3)  
(4/5)  
(6)  
5962-9751401QHA  
ACTIVE  
CFP  
U
10  
1
Non-RoHS  
& Green  
SNPB  
N / A for Pkg Type  
-55 to 125  
9751401QHA  
TLV2422M  
TLV2422AID  
TLV2422AIPWR  
TLV2422CD  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
ACTIVE  
SOIC  
TSSOP  
SOIC  
SOIC  
SOIC  
CFP  
D
PW  
D
8
8
75  
RoHS & Green  
NIPDAU  
NIPDAU  
NIPDAU  
NIPDAU  
NIPDAU  
SNPB  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
Level-1-260C-UNLIM  
N / A for Pkg Type  
-40 to 85  
-40 to 85  
0 to 70  
2422AI  
2000 RoHS & Green  
2422AI  
2422C  
2422I  
8
75  
75  
RoHS & Green  
RoHS & Green  
TLV2422ID  
D
8
-40 to 85  
-40 to 85  
-55 to 125  
TLV2422IDR  
TLV2422MUB  
D
8
2500 RoHS & Green  
2422I  
U
10  
1
Non-RoHS  
& Green  
9751401QHA  
TLV2422M  
(1) The marketing status values are defined as follows:  
ACTIVE: Product device recommended for new designs.  
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.  
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.  
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.  
OBSOLETE: TI has discontinued the production of the device.  
(2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance  
do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may  
reference these types of products as "Pb-Free".  
RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption.  
Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based  
flame retardants must also meet the <=1000ppm threshold requirement.  
(3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.  
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.  
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation  
of the previous line and the two combined represent the entire Device Marking for that device.  
Addendum-Page 1  
PACKAGE OPTION ADDENDUM  
www.ti.com  
23-Apr-2022  
(6)  
Lead finish/Ball material - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead finish/Ball material values may wrap to two  
lines if the finish value exceeds the maximum column width.  
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information  
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and  
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.  
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.  
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.  
OTHER QUALIFIED VERSIONS OF TLV2422, TLV2422M :  
Catalog : TLV2422  
•
Automotive : TLV2422-Q1, TLV2422-Q1  
•
Military : TLV2422M  
•
NOTE: Qualified Version Definitions:  
Catalog - TI's standard catalog product  
•
Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects  
•
Military - QML certified for Military and Defense Applications  
•
Addendum-Page 2  
PACKAGE MATERIALS INFORMATION  
www.ti.com  
9-Aug-2022  
TAPE AND REEL INFORMATION  
REEL DIMENSIONS  
TAPE DIMENSIONS  
K0  
P1  
W
B0  
Reel  
Diameter  
Cavity  
A0  
A0 Dimension designed to accommodate the component width  
B0 Dimension designed to accommodate the component length  
K0 Dimension designed to accommodate the component thickness  
Overall width of the carrier tape  
W
P1 Pitch between successive cavity centers  
Reel Width (W1)  
QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE  
Sprocket Holes  
Q1 Q2  
Q3 Q4  
Q1 Q2  
Q3 Q4  
User Direction of Feed  
Pocket Quadrants  
*All dimensions are nominal  
Device  
Package Package Pins  
Type Drawing  
SPQ  
Reel  
Reel  
A0  
B0  
K0  
P1  
W
Pin1  
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant  
(mm) W1 (mm)  
TLV2422AIPWR  
TLV2422IDR  
TSSOP  
SOIC  
PW  
D
8
8
2000  
2500  
330.0  
330.0  
12.4  
12.4  
7.0  
6.4  
3.6  
5.2  
1.6  
2.1  
8.0  
8.0  
12.0  
12.0  
Q1  
Q1  
Pack Materials-Page 1  
PACKAGE MATERIALS INFORMATION  
www.ti.com  
9-Aug-2022  
TAPE AND REEL BOX DIMENSIONS  
Width (mm)  
H
W
L
*All dimensions are nominal  
Device  
Package Type Package Drawing Pins  
SPQ  
Length (mm) Width (mm) Height (mm)  
TLV2422AIPWR  
TLV2422IDR  
TSSOP  
SOIC  
PW  
D
8
8
2000  
2500  
356.0  
340.5  
356.0  
336.1  
35.0  
25.0  
Pack Materials-Page 2  
PACKAGE MATERIALS INFORMATION  
www.ti.com  
9-Aug-2022  
TUBE  
T - Tube  
height  
L - Tube length  
W - Tube  
width  
B - Alignment groove width  
*All dimensions are nominal  
Device  
Package Name Package Type  
Pins  
SPQ  
L (mm)  
W (mm)  
T (µm)  
B (mm)  
5962-9751401QHA  
TLV2422AID  
TLV2422AID  
TLV2422CD  
TLV2422CD  
TLV2422ID  
U
D
D
D
D
D
D
U
CFP  
SOIC  
SOIC  
SOIC  
SOIC  
SOIC  
SOIC  
CFP  
10  
8
1
506.98  
507  
26.16  
8
6220  
3940  
3810  
3940  
3810  
3940  
3810  
6220  
NA  
4.32  
4
75  
75  
75  
75  
75  
75  
1
8
505.46  
507  
6.76  
8
8
4.32  
4
8
505.46  
507  
6.76  
8
8
4.32  
4
TLV2422ID  
8
505.46  
506.98  
6.76  
26.16  
TLV2422MUB  
10  
NA  
Pack Materials-Page 3  
PACKAGE OUTLINE  
D0008A  
SOIC - 1.75 mm max height  
SCALE 2.800  
SMALL OUTLINE INTEGRATED CIRCUIT  
C
SEATING PLANE  
.228-.244 TYP  
[5.80-6.19]  
.004 [0.1] C  
A
PIN 1 ID AREA  
6X .050  
[1.27]  
8
1
2X  
.189-.197  
[4.81-5.00]  
NOTE 3  
.150  
[3.81]  
4X (0 -15 )  
4
5
8X .012-.020  
[0.31-0.51]  
B
.150-.157  
[3.81-3.98]  
NOTE 4  
.069 MAX  
[1.75]  
.010 [0.25]  
C A B  
.005-.010 TYP  
[0.13-0.25]  
4X (0 -15 )  
SEE DETAIL A  
.010  
[0.25]  
.004-.010  
[0.11-0.25]  
0 - 8  
.016-.050  
[0.41-1.27]  
DETAIL A  
TYPICAL  
(.041)  
[1.04]  
4214825/C 02/2019  
NOTES:  
1. Linear dimensions are in inches [millimeters]. Dimensions in parenthesis are for reference only. Controlling dimensions are in inches.  
Dimensioning and tolerancing per ASME Y14.5M.  
2. This drawing is subject to change without notice.  
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not  
exceed .006 [0.15] per side.  
4. This dimension does not include interlead flash.  
5. Reference JEDEC registration MS-012, variation AA.  
www.ti.com  
EXAMPLE BOARD LAYOUT  
D0008A  
SOIC - 1.75 mm max height  
SMALL OUTLINE INTEGRATED CIRCUIT  
8X (.061 )  
[1.55]  
SYMM  
SEE  
DETAILS  
1
8
8X (.024)  
[0.6]  
SYMM  
(R.002 ) TYP  
[0.05]  
5
4
6X (.050 )  
[1.27]  
(.213)  
[5.4]  
LAND PATTERN EXAMPLE  
EXPOSED METAL SHOWN  
SCALE:8X  
SOLDER MASK  
OPENING  
SOLDER MASK  
OPENING  
METAL UNDER  
SOLDER MASK  
METAL  
EXPOSED  
METAL  
EXPOSED  
METAL  
.0028 MAX  
[0.07]  
.0028 MIN  
[0.07]  
ALL AROUND  
ALL AROUND  
SOLDER MASK  
DEFINED  
NON SOLDER MASK  
DEFINED  
SOLDER MASK DETAILS  
4214825/C 02/2019  
NOTES: (continued)  
6. Publication IPC-7351 may have alternate designs.  
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.  
www.ti.com  
EXAMPLE STENCIL DESIGN  
D0008A  
SOIC - 1.75 mm max height  
SMALL OUTLINE INTEGRATED CIRCUIT  
8X (.061 )  
[1.55]  
SYMM  
1
8
8X (.024)  
[0.6]  
SYMM  
(R.002 ) TYP  
[0.05]  
5
4
6X (.050 )  
[1.27]  
(.213)  
[5.4]  
SOLDER PASTE EXAMPLE  
BASED ON .005 INCH [0.125 MM] THICK STENCIL  
SCALE:8X  
4214825/C 02/2019  
NOTES: (continued)  
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate  
design recommendations.  
9. Board assembly site may have different recommendations for stencil design.  
www.ti.com  
PACKAGE OUTLINE  
PW0008A  
TSSOP - 1.2 mm max height  
S
C
A
L
E
2
.
8
0
0
SMALL OUTLINE PACKAGE  
C
6.6  
6.2  
SEATING PLANE  
TYP  
PIN 1 ID  
AREA  
A
0.1 C  
6X 0.65  
8
5
1
3.1  
2.9  
NOTE 3  
2X  
1.95  
4
0.30  
0.19  
8X  
4.5  
4.3  
1.2 MAX  
B
0.1  
C A  
B
NOTE 4  
(0.15) TYP  
SEE DETAIL A  
0.25  
GAGE PLANE  
0.15  
0.05  
0.75  
0.50  
0 - 8  
DETAIL A  
TYPICAL  
4221848/A 02/2015  
NOTES:  
1. All linear dimensions are in millimeters. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing  
per ASME Y14.5M.  
2. This drawing is subject to change without notice.  
3. This dimension does not include mold flash, protrusions, or gate burrs. Mold flash, protrusions, or gate burrs shall not  
exceed 0.15 mm per side.  
4. This dimension does not include interlead flash. Interlead flash shall not exceed 0.25 mm per side.  
5. Reference JEDEC registration MO-153, variation AA.  
www.ti.com  
EXAMPLE BOARD LAYOUT  
PW0008A  
TSSOP - 1.2 mm max height  
SMALL OUTLINE PACKAGE  
8X (1.5)  
SYMM  
8X (0.45)  
(R0.05)  
1
4
TYP  
8
SYMM  
6X (0.65)  
5
(5.8)  
LAND PATTERN EXAMPLE  
SCALE:10X  
SOLDER MASK  
OPENING  
SOLDER MASK  
OPENING  
METAL UNDER  
SOLDER MASK  
METAL  
0.05 MAX  
ALL AROUND  
0.05 MIN  
ALL AROUND  
SOLDER MASK  
DEFINED  
NON SOLDER MASK  
DEFINED  
SOLDER MASK DETAILS  
NOT TO SCALE  
4221848/A 02/2015  
NOTES: (continued)  
6. Publication IPC-7351 may have alternate designs.  
7. Solder mask tolerances between and around signal pads can vary based on board fabrication site.  
www.ti.com  
EXAMPLE STENCIL DESIGN  
PW0008A  
TSSOP - 1.2 mm max height  
SMALL OUTLINE PACKAGE  
8X (1.5)  
SYMM  
(R0.05) TYP  
8X (0.45)  
1
4
8
SYMM  
6X (0.65)  
5
(5.8)  
SOLDER PASTE EXAMPLE  
BASED ON 0.125 mm THICK STENCIL  
SCALE:10X  
4221848/A 02/2015  
NOTES: (continued)  
8. Laser cutting apertures with trapezoidal walls and rounded corners may offer better paste release. IPC-7525 may have alternate  
design recommendations.  
9. Board assembly site may have different recommendations for stencil design.  
www.ti.com  
PACKAGE OUTLINE  
U0010A  
CFP - 2.03 mm max height  
S
C
A
L
E
1
.
4
0
0
CERAMIC FLATPACK  
.27 MAX  
GLASS  
.005 MIN  
TYP  
.010 .002  
1
PIN 1 ID  
.045 MAX  
TYP  
10  
8X .050 .005  
.27 MAX  
GLASS  
5
6
10X .017 .002  
+.019  
.241  
5X .32 .01  
5X .32 .01  
-.003  
.005 .001  
+.013  
.067  
-.012  
.045  
.026  
4225582/A 01/2020  
NOTES:  
1. All linear dimensions are in inches. Any dimensions in parenthesis are for reference only. Dimensioning and tolerancing  
per ASME Y14.5M.  
2. This drawing is subject to change without notice.  
www.ti.com  
IMPORTANT NOTICE AND DISCLAIMER  
TI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATA SHEETS), DESIGN RESOURCES (INCLUDING REFERENCE  
DESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”  
AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANY  
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRD  
PARTY INTELLECTUAL PROPERTY RIGHTS.  
These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriate  
TI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicable  
standards, and any other safety, security, regulatory or other requirements.  
These resources are subject to change without notice. TI grants you permission to use these resources only for development of an  
application that uses the TI products described in the resource. Other reproduction and display of these resources is prohibited. No license  
is granted to any other TI intellectual property right or to any third party intellectual property right. TI disclaims responsibility for, and you  
will fully indemnify TI and its representatives against, any claims, damages, costs, losses, and liabilities arising out of your use of these  
resources.  
TI’s products are provided subject to TI’s Terms of Sale or other applicable terms available either on ti.com or provided in conjunction with  
such TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for  
TI products.  
TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE  
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265  
Copyright © 2022, Texas Instruments Incorporated  

相关型号：

5962-9751401QPA

 Voltage-Feedback Operational Amplifier
ETC

5962-9751402Q2A

 Voltage-Feedback Operational Amplifier
ETC

5962-9751402QHA

 Voltage-Feedback Operational Amplifier
ETC

5962-9751402QPA

 Voltage-Feedback Operational Amplifier
ETC

5962-9751601Q2A

 DATA SELECTORS/MULTIPLEXERS
TI

5962-9751601QCA

 DATA SELECTORS/MULTIPLEXERS
TI

5962-9751601QCX

 S SERIES, TRIPLE 3-INPUT AND GATE, CDIP14, CERAMIC, DIP-14
TI

5962-9751601QDA

 DATA SELECTORS/MULTIPLEXERS
TI

5962-9751601QDX

 S SERIES, TRIPLE 3-INPUT AND GATE, CDFP14, CERAMIC, DFP-14
TI

5962-9751801MPA

 Voltage-Feedback Operational Amplifier
ETC

5962-9751801MPX

 Operational Amplifier, 1 Func, CERAMIC, DIP-8
WEDC

5962-9751901MPA

 Current-Feedback Operational Amplifier
ETC
©2020 ICPDF网 联系我们和版权申明