5962-9322701QSA [TI]
OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS; 八路缓冲器/驱动器，具有三态输出
| 型号： | 5962-9322701QSA |
| 厂家： | 
TEXAS INSTRUMENTS |
| 描述： | OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS |
| 文件： | 总20页 (文件大小：847K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN54ABT241, SN74ABT241A
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS184D – JANUARY 1991 – REVISED JANUARY 1997
SN54ABT241 . . . J OR W PACKAGE
SN74ABT241A . . . DB, DW, N, OR PW PACKAGE
(TOP VIEW)
State-of-the-Art EPIC-ΙΙB BiCMOS Design
Significantly Reduces Power Dissipation
Latch-Up Performance Exceeds 500 mA Per
JEDEC Standard JESD-17
1OE
1A1
2Y4
1A2
2Y3
1A3
2Y2
1A4
2Y1
GND
V
CC
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
ESD Protection Exceeds 2000 V Per
MIL-STD-883, Method 3015; Exceeds 200 V
Using Machine Model (C = 200 pF, R = 0)
2OE
1Y1
2A4
1Y2
2A3
1Y3
Typical V
(Output Ground Bounce) < 1 V
OLP
at V
= 5 V, T = 25°C
CC
A
High-Drive Outputs (–32-mA I , 64-mA I
OH
)
OL
13 2A2
12 1Y4
Package Options Include Plastic
Small-Outline (DW), Shrink Small-Outline
(DB), and Thin Shrink Small-Outline (PW)
Packages, Ceramic Chip Carriers (FK),
Plastic (N) and Ceramic (J) DIPs, and
Ceramic Flat (W) Package
11
2A1
SN54ABT241 . . . FK PACKAGE
(TOP VIEW)
description
These octal buffers and line drivers are designed
specifically to improve both the performance and
density of 3-state memory address drivers, clock
drivers, and bus-oriented receivers and
transmitters. Together with the SN54ABT240,
SN74ABT240A, and ’ABT244A, these devices
provide the choice of selected combinations of
inverting and noninverting outputs, symmetrical
active-low output-enable (OE) inputs, and
complementary OE and OE inputs.
3
2
1
20 19
18
1Y1
2A4
1Y2
2A3
1Y3
1A2
2Y3
1A3
2Y2
1A4
4
5
6
7
8
17
16
15
14
9 10 11 12 13
To ensure the high-impedance state during power up or power down, OE should be tied to V through a pullup
CC
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. OE
should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the
current-sourcing capability of the driver.
The SN54ABT241 is characterized for operation over the full military temperature range of –55°C to 125°C. The
SN74ABT241A is characterized for operation from –40°C to 85°C.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
EPIC-ΙΙB is a trademark of Texas Instruments Incorporated.
Copyright 1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT241, SN74ABT241A
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS184D – JANUARY 1991 – REVISED JANUARY 1997
FUNCTION TABLES
INPUTS
OUTPUT
1Y
1OE
1A
H
L
L
H
L
L
H
X
Z
INPUTS
OUTPUT
2Y
2OE
H
2A
H
H
L
H
L
L
X
Z
†
logic symbol
19
1
1OE
EN
2OE
EN
11
13
15
17
9
7
5
3
2
18
16
14
12
2A1
2A2
2A3
2A4
2Y1
2Y2
2Y3
2Y4
1A1
4
1Y1
1Y2
1Y3
1Y4
1A2
6
1A3
8
1A4
†
This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.
logic diagram (positive logic)
1
19
11
1OE
2OE
2A1
2
18
16
14
12
9
7
5
3
1A1
1Y1
1Y2
1Y3
1Y4
2Y1
2Y2
2Y3
2Y4
4
13
15
17
1A2
2A2
2A3
2A4
6
1A3
8
1A4
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT241, SN74ABT241A
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS184D – JANUARY 1991 – REVISED JANUARY 1997
†
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage range, V
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
CC
Input voltage range, V (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 V to 7 V
I
Voltage range applied to any output in the high or power-off state, V
. . . . . . . . . . . . . . . . . . . –0.5 V to 5.5 V
O
Current into any output in the low state, I : SN54ABT241 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 mA
O
SN74ABT241A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 mA
Input clamp current, I (V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –18 mA
IK
OK
I
Output clamp current, I
(V < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50 mA
O
Package thermal impedance, θ (see Note 2): DB package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115°C/W
JA
DW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97°C/W
N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67°C/W
PW package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128°C/W
Storage temperature range, T
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
stg
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
2. The package thermal impedance is calculated in accordance with EIA/JEDEC Std JESD51, except for through-hole packages,
which use a trace length of zero.
recommended operating conditions (see Note 3)
SN54ABT241 SN74ABT241A
UNIT
MIN
4.5
2
MAX
MIN
4.5
2
MAX
V
V
V
V
Supply voltage
5.5
5.5
V
V
CC
High-level input voltage
Low-level input voltage
Input voltage
IH
0.8
0.8
V
IL
0
V
CC
0
V
CC
V
I
I
High-level output current
Low-level output current
Input transition rise or fall rate
Operating free-air temperature
–24
48
–32
64
5
mA
mA
ns/V
°C
OH
OL
I
∆t/∆v
Outputs enabled
5
T
–55
125
–40
85
A
NOTE 3: Unused inputs must be held high or low to prevent them from floating.
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT241, SN74ABT241A
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS184D – JANUARY 1991 – REVISED JANUARY 1997
electrical characteristics over recommended operating free-air temperature range (unless
otherwise noted)
T
= 25°C
SN54ABT241 SN74ABT241A
A
PARAMETER
TEST CONDITIONS
UNIT
†
MIN TYP
MAX
MIN
MAX
MIN
MAX
V
V
V
V
= 4.5 V,
= 4.5 V,
= 5 V,
I = –18 mA
–1.2
–1.2
–1.2
V
IK
CC
CC
CC
I
I
I
I
I
I
I
= –3 mA
= –3 mA
= –24 mA
= –32 mA
= 48 mA
= 64 mA
2.5
3
2.5
3
2.5
3
OH
OH
OH
OH
OL
OL
V
OH
V
2
2
V
= 4.5 V
= 4.5 V
CC
CC
2*
2
0.55
0.55
V
V
V
V
OL
0.55*
0.55
100
mV
µA
µA
µA
µA
µA
mA
µA
mA
µA
hys
I
I
I
I
I
I
V
CC
V
CC
V
CC
V
CC
V
CC
V
CC
= 5.5 V,
= 5.5 V,
= 5.5 V,
= 0,
V = V or GND
I CC
±1
10
±1
10
±1
10
I
V
O
V
O
= 2.7 V
= 0.5 V
OZH
OZL
off
–10
±100
50
–10
–10
±100
50
V or V ≤ 4.5 V
I
O
= 5.5 V, V = 5.5 V
O
Outputs high
= 2.5 V
50
–180
250
30
CEX
‡
= 5.5 V,
V
O
–50
–100
1
–180
250
30
–50
–50
–180
250
30
O
Outputs high
Outputs low
V
= 5.5 V, I = 0,
O
CC
I
24
CC
V = V
I
or GND
CC
Outputs disabled
0.5
250
250
250
V
= 5.5 V,
CC
Outputs enabled
Outputs disabled
1.5
0.05
1.5
1.5
0.05
1.5
1.5
0.05
1.5
Data
One input at 3.4 V,
Other inputs at
inputs
§
mA
∆I
CC
V
CC
or GND
Control
inputs
V
CC
= 5.5 V, One input at 3.4 V,
or GND
Other inputs at V
CC
V = 2.5 V or 0.5 V
C
C
4
pF
pF
i
I
V
O
= 2.5 V or 0.5 V
5.5
o
* On products compliant to MIL-PRF-38535, this parameter does not apply.
†
‡
§
All typical values are at V
= 5 V.
CC
Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
This is the increase in supply current for each input that is at the specified TTL voltage level rather than V
or GND.
CC
4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT241, SN74ABT241A
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS184D – JANUARY 1991 – REVISED JANUARY 1997
switching characteristics over recommended ranges of supply voltage and operating free-air
temperature, C = 50 pF (unless otherwise noted) (see Figure 1)
L
SN54ABT241
= 5 V,
FROM
(INPUT)
TO
(OUTPUT)
V
CC
A
PARAMETER
UNIT
T
= 25°C
TYP
2.6
MIN
MAX
MIN
1
MAX
4.1
4.2
6.3
5.8
6.1
5.4
t
t
t
t
t
t
0.8
0.8
1
5.3
5
PLH
PHL
PZH
PZL
PHZ
PLZ
A
Y
Y
Y
ns
ns
ns
1
2.9
1.1
1.3
1.1
1
4.8
7
OE or OE
OE or OE
4.3
1
7
4.6
0.8
0.8
7.9
6.2
3.9
switching characteristics over recommended ranges of supply voltage and operating free-air
temperature, C = 50 pF (unless otherwise noted) (see Figure 1)
L
SN74ABT241A
= 5 V,
FROM
(INPUT)
TO
(OUTPUT)
V
CC
A
PARAMETER
UNIT
T
= 25°C
TYP
2.6
MIN
MAX
MIN
1
MAX
4.1
4.4
6.3
5.8
6.1
5.4
t
t
t
t
t
t
1
1
4.6
4.6
6.8
6.8
7.1
5.9
PLH
PHL
PZH
PZL
PHZ
PLZ
A
Y
Y
Y
ns
ns
ns
1
2.9
1.1
1.3
1.6
1
4.8
1.1
1.3
1.6
1
OE or OE
OE or OE
4.3
4.6
3.9
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
SN54ABT241, SN74ABT241A
OCTAL BUFFERS/DRIVERS
WITH 3-STATE OUTPUTS
SCBS184D – JANUARY 1991 – REVISED JANUARY 1997
PARAMETER MEASUREMENT INFORMATION
7 V
Open
TEST
/t
S1
S1
500 Ω
From Output
Under Test
t
Open
7 V
PLH PHL
GND
t
/t
PLZ PZL
C
= 50 pF
t
/t
Open
L
PHZ PZH
500 Ω
(see Note A)
3 V
0 V
LOAD CIRCUIT
Timing Input
Data Input
1.5 V
t
w
t
t
h
su
3 V
0 V
3 V
0 V
Input
1.5 V
1.5 V
1.5 V
1.5 V
VOLTAGE WAVEFORMS
PULSE DURATION
VOLTAGE WAVEFORMS
SETUP AND HOLD TIMES
3 V
0 V
3 V
0 V
Output
Control
1.5 V
1.5 V
1.5 V
1.5 V
Input
t
PZL
t
t
t
PHL
PLH
PHL
t
PLZ
Output
Waveform 1
S1 at 7 V
3.5 V
V
V
OH
1.5 V
1.5 V
1.5 V
1.5 V
Output
V
V
+ 0.3 V
OL
V
OL
OL
(see Note B)
t
PHZ
t
PLH
t
PZH
Output
Waveform 2
S1 at Open
(see Note B)
V
OH
V
V
OH
– 0.3 V
OH
1.5 V
1.5 V
Output
≈ 0 V
OL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
INVERTING AND NONINVERTING OUTPUTS
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
LOW- AND HIGH-LEVEL ENABLING
NOTES: A. includes probe and jig capacitance.
C
L
B. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, Z = 50 Ω, t ≤ 2.5 ns, t ≤ 2.5 ns.
O
r
f
D. The outputs are measured one at a time with one transition per measurement.
Figure 1. Load Circuit and Voltage Waveforms
6
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
25-Sep-2013
PACKAGING INFORMATION
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
5962-9322701Q2A
ACTIVE
LCCC
FK
20
1
TBD
POST-PLATE
N / A for Pkg Type
-55 to 125
5962-
9322701Q2A
SNJ54ABT
241FK
5962-9322701QRA
5962-9322701QSA
ACTIVE
ACTIVE
CDIP
CFP
J
20
20
1
1
TBD
TBD
TBD
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
5962-9322701QR
A
SNJ54ABT241J
W
Call TI
5962-9322701QS
A
SNJ54ABT241W
SN74ABT241ADBLE
SN74ABT241ADBR
OBSOLETE
ACTIVE
SSOP
SSOP
DB
DB
20
20
Call TI
Call TI
-40 to 85
-40 to 85
2000
2000
2000
25
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
AB241A
SN74ABT241ADBRE4
SN74ABT241ADBRG4
SN74ABT241ADW
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
SSOP
SSOP
SOIC
SOIC
SOIC
SOIC
SOIC
PDIP
DB
DB
DW
DW
DW
DW
DW
N
20
20
20
20
20
20
20
20
20
20
20
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
CU NIPDAU
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
-40 to 85
AB241A
Green (RoHS
& no Sb/Br)
AB241A
Green (RoHS
& no Sb/Br)
ABT241A
ABT241A
ABT241A
ABT241A
ABT241A
SN74ABT241AN
SN74ABT241AN
AB241A
SN74ABT241ADWG4
SN74ABT241ADWR
SN74ABT241ADWRE4
SN74ABT241ADWRG4
SN74ABT241AN
25
Green (RoHS
& no Sb/Br)
2000
2000
2000
20
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Green (RoHS
& no Sb/Br)
Pb-Free
(RoHS)
SN74ABT241ANE4
SN74ABT241APW
PDIP
N
20
Pb-Free
(RoHS)
N / A for Pkg Type
TSSOP
TSSOP
PW
PW
70
Green (RoHS
& no Sb/Br)
Level-1-260C-UNLIM
Level-1-260C-UNLIM
SN74ABT241APWE4
70
Green (RoHS
& no Sb/Br)
AB241A
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
25-Sep-2013
Orderable Device
Status Package Type Package Pins Package
Eco Plan Lead/Ball Finish
MSL Peak Temp
Op Temp (°C)
Device Marking
Samples
Drawing
Qty
(1)
(2)
(3)
(4/5)
SN74ABT241APWG4
ACTIVE
TSSOP
PW
20
70
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
-40 to 85
AB241A
SN74ABT241APWLE
SN74ABT241APWR
OBSOLETE
ACTIVE
TSSOP
TSSOP
PW
PW
20
20
TBD
Call TI
Call TI
-40 to 85
-40 to 85
2000
2000
2000
1
Green (RoHS
& no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
AB241A
AB241A
AB241A
SN74ABT241APWRE4
SN74ABT241APWRG4
SNJ54ABT241FK
ACTIVE
ACTIVE
ACTIVE
TSSOP
TSSOP
LCCC
PW
PW
FK
20
20
20
Green (RoHS
& no Sb/Br)
CU NIPDAU
CU NIPDAU
POST-PLATE
Level-1-260C-UNLIM
Level-1-260C-UNLIM
N / A for Pkg Type
-40 to 85
-40 to 85
-55 to 125
Green (RoHS
& no Sb/Br)
TBD
5962-
9322701Q2A
SNJ54ABT
241FK
SNJ54ABT241J
SNJ54ABT241W
ACTIVE
ACTIVE
CDIP
CFP
J
20
20
1
1
TBD
TBD
A42
N / A for Pkg Type
N / A for Pkg Type
-55 to 125
-55 to 125
5962-9322701QR
A
SNJ54ABT241J
W
Call TI
5962-9322701QS
A
SNJ54ABT241W
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
25-Sep-2013
(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF SN54ABT241 :
Catalog: SN74ABT241
•
NOTE: Qualified Version Definitions:
Catalog - TI's standard catalog product
•
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
B0
K0
P1
W
Pin1
Diameter Width (mm) (mm) (mm) (mm) (mm) Quadrant
(mm) W1 (mm)
SN74ABT241ADBR
SN74ABT241ADWR
SN74ABT241APWR
SSOP
SOIC
DB
DW
PW
20
20
20
2000
2000
2000
330.0
330.0
330.0
16.4
24.4
16.4
8.2
7.5
13.0
7.1
2.5
2.7
1.6
12.0
12.0
8.0
16.0
24.0
16.0
Q1
Q1
Q1
10.8
6.95
TSSOP
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Jul-2012
*All dimensions are nominal
Device
Package Type Package Drawing Pins
SPQ
Length (mm) Width (mm) Height (mm)
SN74ABT241ADBR
SN74ABT241ADWR
SN74ABT241APWR
SSOP
SOIC
DB
DW
PW
20
20
20
2000
2000
2000
367.0
367.0
367.0
367.0
367.0
367.0
38.0
45.0
38.0
TSSOP
Pack Materials-Page 2
MECHANICAL DATA
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001
DB (R-PDSO-G**)
PLASTIC SMALL-OUTLINE
28 PINS SHOWN
0,38
0,22
0,65
28
M
0,15
15
0,25
0,09
5,60
5,00
8,20
7,40
Gage Plane
1
14
0,25
A
0°–ā8°
0,95
0,55
Seating Plane
0,10
2,00 MAX
0,05 MIN
PINS **
14
16
20
24
28
30
38
DIM
6,50
5,90
6,50
5,90
7,50
8,50
7,90
10,50
9,90
10,50 12,90
A MAX
A MIN
6,90
9,90
12,30
4040065 /E 12/01
NOTES: A. All linear dimensions are in millimeters.
B. This drawing is subject to change without notice.
C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.
D. Falls within JEDEC MO-150
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
amplifier.ti.com
dataconverter.ti.com
www.dlp.com
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Amplifiers
Data Converters
DLP® Products
DSP
Computers and Peripherals
Consumer Electronics
Energy and Lighting
Industrial
www.ti.com/computers
www.ti.com/consumer-apps
www.ti.com/energy
dsp.ti.com
Clocks and Timers
Interface
www.ti.com/clocks
interface.ti.com
logic.ti.com
www.ti.com/industrial
www.ti.com/medical
Medical
Logic
Security
www.ti.com/security
Power Mgmt
Microcontrollers
RFID
power.ti.com
Space, Avionics and Defense
Video and Imaging
www.ti.com/space-avionics-defense
www.ti.com/video
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/omap
OMAP Applications Processors
Wireless Connectivity
TI E2E Community
e2e.ti.com
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated
相关型号：
5962-9322801MXA
TEST-BUS CONTROLLERS IEEE STD 1149.1 JTAG TAP MASTERS WITH 16-BIT GENERIC HOST INTERFACES
TI
5962-9322801MYA
TEST-BUS CONTROLLERS IEEE STD 1149.1 JTAG TAP MASTERS WITH 16-BIT GENERIC HOST INTERFACES
TI
©2020 ICPDF网 联系我们和版权申明