WSYN [TE]

Paralleling Relays; 并联继电器


型号：	WSYN
厂家：	TE CONNECTIVITY
描述：	Paralleling Relays 并联继电器继电器
文件：	总1页 (文件大小：68K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Paralleling Relays

Function:

• ANSI/IEEE C37.90-1978

• UL file No. E58048

WILMAR™ Protective Relays – WSYN Series

TERMINAL STRIPS

#6 - 32 SCREWS

• CSA file No. LR61158

Operation:

A. The output relay will energize when all three

of the following conditions are met:

1. Voltage differential is below the preset

value.

2. Phase angle is below the preset value.

3. Frequency differential is below the preset

value.

3 ¹/

B. The relay is also provided with a "Double Dead

Bus" feature: When the voltage on either one

of the sensing inputs is below 15-25% of

nominal, (Dead Bus Condition), the output

relay will energize to permit paralleling.

When both sensing voltage are below 15-25%

of nominal, the output relay will not energize.

/64

" DIA.

4 MTG. HOLES

Note: Dimensions in inches. Multiply values by 25.4 for dimensions in mm.

PART NUMBER SELECTION

Sample Part No.

WSYN-50-120-12DC-A

Type:

WSYN - Synchro Check

Frequency Hz

PRODUCT SPECIFICATIONS

400

Part Number

WSYN Series

Sensing Voltage VAC ( ±10%)

Sensing Voltage ...................................

Single Phase, see Part Number Selection

120

200

208

220

230

240

380

400

416

440

460

480

525

575

Control Voltage ....................................

Voltage Differential Adjust Range .......

See Part Number Selection

4% to 10% of nominal voltage

Phase Angle Adjust Range ..................

Frequency Differential Adjust Range

Operating Temperature ........................

Contact Ratings ....................................

Output Contacts ...................................

Notes:

1. Remove black cover screws to gain access to the adjustment potentiometers.

2. Clockwise rotation increases the trip differential setting.

3. Calibration terminals (11) (12) must be connected together to disable the phase angle

detector when setting the frequency difference trip point. Once it is set, the connection must

be removed.

4 to 10 electrical degrees

0.2 Hz to 0.5 Hz

Control Voltage ( ±20%)

-20^oC to +50 ^oC

12DC

24DC

120AC

230AC

380AC

460AC

5 amp resistive at 120 VAC or 28Vdc

One set N.O., one set N.C.

48DC

125DC

Options

A = two normal open contacts

B = two normally closed contacts

H = Contacts rated 3 amp at 125 VDC

P = Transient Protection

Transient Protection - All voltage relays will withstand

momentary voltage surges of twice the nominal rated input

voltage (standard).

3 8

Tyco Electronics / www.tycoelectronics.com / Factory Direct Technical Support: 800-253-4560, ext. 2023 (U.S., Canada, Mexico) or 805-220-2020, ext. 2023 (International)