V23100-V4005-A000 [TE]
Direct coil control with TTL-signals possible; 直接控制线圈与TTL -信号可能型号: | V23100-V4005-A000 |
厂家: | TE CONNECTIVITY |
描述: | Direct coil control with TTL-signals possible |
文件: | 总13页 (文件大小:2480K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AXICOM
Telecom-, Signal and RF Relays
Reed V23100-V4 Relay
108-98011 • Nov. 07 Rev. C • ECOC: JM10
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Disclaimer
While Tyco Electronics has made every reasonable effort
to ensure the accuracy of the information in this datasheet,
Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representati-
on, warranty or guarantee that the information is accurate,
correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contai-
ned herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties (and all express
warranties, except as otherwise stated in this datasheet)
regarding the information contained herein, including but
not limited to any implied warranties or merchantability or
fitness for a particular purpose. It is recommended that
you test any new or replacement product before incorpo-
rating into a system.
The dimensions in this datasheet are for reference purpo-
se only and are subject to change without notice. Specifi-
cations are subject to change without notice.
Index
Relay Types
DIP Version (flat)
3
4
DIP Version (high)
SIL Version
6
8
Mini SIL Version
Contact Data
Insulation
General Data
10
11
11
11
11
File No. E 111441
High Frequency Data
All specifications subject to change. Consult Tyco Electronics for latest specifications.
2 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
1 and 2 pole relays
non-polarized, non-latching
ROHS compliant (Directive 2002/95/EC) as per product
date code 0501.
Typical applications
Features
• Incircuit tester
• Measuring and control systems
• Telecom equipment
• Direct coil control with TTL-signals possible
• Highly reliable switching
• High switching rates
• Alarm and security equipment
• Ultrasonic cleanable
• High vibration and shock resistance
Relay Types
DIP version (flat)
• Standard version
• Electrostatic shield
between coil and contact
• Protective diode
• Electrostatic shield and protective diode
• Contact arrangement:
1 form a (1 normally open contact) or
1 form c (1 changeover contact)
DIP version (high)
• Standard version
• Electrostatic shield
between coil and contact
• Protective diode
• Electrostatic shield and protective diode
• Contact arrangement:
2 form a (2 normally open contacts) or
1 form c (1 changeover contact)
SIL version
• Standard version
• Protective diode
• Contact arrangement:
1 form a (1 normally open contact)
Mini SIL version
• Standard version
• Protective diode
• Standard internal magnetic shield
• Contact arrangement:
1 form a (1 normally open contact)
All specifications subject to change. Consult Tyco Electronics for latest specifications.
3 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Dimensions
Dimensions in mm
DIP version (flat)
DIP flat version
mm
inch
L
W
H
Hb
T
Tw
Tz
19.30
6.40
5.70
5.10
3.20 ± 0.1
0.50 ± 0.1
0.25 ± 0.1
-
-
-
-
0.2
0.2
0.2
0.2
0.760
-
-
-
-
0.008
0.252
0.224
0.201
0.126 ± 0.004
0.020 ± 0.004
0.010 ± 0.004
0.008
0.008
0.008
Mounting hole layout
Top view
Terminal assignment
Top view
1 form a
standard
1 form a
with diode
1 form a
with electrostatic
shield and diode
1 form c
standard
1 form a
with electrostatic
shield
A000
A010
A011
C000
A001
1413
9 8
1
2
6 7
All specifications subject to change. Consult Tyco Electronics for latest specifications.
4 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Coil Data (values at 23 °C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
Maximum
voltage Umin voltage Umax
Vdc
Vdc Vdc
Vdc
mW
Ω / ± 10 %
DIP version flat: 1 form a contact, standard
5
12
15
24
3.5
8.4
10.5
16.8
22
33
44
44
0.75
1.80
2.25
3.60
50
144
112
288
500
1000
2000
2000
V23100-V4005-A000
V23100-V4012-A000
V23100-V4015-A000
V23100-V4024-A000
1393763-1
1393763-6
1-1393763-0
1-1393763-4
DIP version flat: 1 form a contact, with diode
5
12
15
24
3.5
8.4
10.5
16.8
14
25
47
47
0.75
1.80
2.25
3.60
50
144
112
288
500
1000
2000
2000
V23100-V4005-A010
V23100-V4012-A010
V23100-V4015-A010
V23100-V4024-A010
1393763-4
1393763-8
1-1393763-2
1-1393763-6
DIP version flat: 1 form c contact, standard
5
12
15
24
3.5
8.4
10.5
16.8
13 (14.5)*
22 (23.5)*
44 (14.5)*
44 (49.0)*
0.75
1.80
2.25
3.60
125
288
112
288
200
500
2000
2000
V23100-V4305-C000
V23100-V4312-C000
V23100-V4315-C000
V23100-V4324-C000
2-1393763-0
2-1393763-8
3-1393763-4
4-1393763-0
DIP version flat: 1 form a contact, with electrostatic shield
5
12
15
24
3.5
8.4
10.5
16.8
22
33
44
44
0.75
1.80
2.25
3.60
50
144
112
288
500
1000
2000
2000
V23100-V4005-A001
V23100-V4012-A001
V23100-V4015-A001
V23100-V4024-A001
1393763-3
1393763-7
1-1393763-1
1-1393763-5
DIP version flat: 1 form a contact, with electrostatic shield and diode
5
12
15
24
3.5
8.4
10.5
16.8
14
25
47
47
0.75
1.80
2.25
3.60
50
144
112
288
200
1000
2000
2000
V23100-V4005-A011
V23100-V4012-A011
V23100-V4015-A011
V23100-V4024-A011
1393763-3
1393763-9
1-1393763-3
1-1393763-7
* Values in brackets refer to high relay with protective diode
Relay Code
Block 1
Block 2
Block 3
13 14 15
12
1
V
2
2
3
3
4
1
5
0
6
0
7
V
8
4
9
10 11
Digit
-
Basic type number
of DIL/SIL reed relay
Contact arrangement
0 = DIL:
3 = DIL:
5 = SIL:
1 form A
2 form A or 1 form C
1 form A
6 = Mini SIL: 1 form A
Coil number
05 = 5 Vdc coil
12 = 12 Vdc coil
15 = 15 Vdc coil
24 = 24 Vdc coil
Relay version (contact arrangement)
Ordering example: V23100-V4005-A010 DIL reed relay with 1 make, 5 V nominal voltage, with clamping diode (spark suppression)
All specifications subject to change. Consult Tyco Electronics for latest specifications.
5 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Dimensions
Dimensions in mm
DIP version (high)
DIP-high version
mm
inch
0.760 0.008
L
W
H
19.30
7.00
7.50
-
-
-
0.2
0.2
0.2
-
0.276
0.295
-0.008
-0.008
S
T
Tw
Tz
0.50 ± 0.1
3.20 ± 0.1
0.50 ± 0.1
0.25 ± 0.1
0.200 ± 0.004
0.126 ± 0.004
0.020 ± 0.004
0.010 ± 0.004
Mounting hole layout
Top view
Terminal assignment
Top view
1 form c
with diode
2 form a
standard
2 form a
with diode
1 form c
with electrostatic
shield and diode
C010
B000
B010
C011
All specifications subject to change. Consult Tyco Electronics for latest specifications.
6 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Coil Data (values at 23 °C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
Maximum
voltage Umin voltage Umax
Vdc
Vdc Vdc
Vdc
mW
Ω / ± 10 %
DIP version high: 2 form a contact, standard
5
12
15
24
3.5
8.4
10.5
16.8
14
25
47
47
0.75
1.80
2.25
3.60
125
288
112
288
200
500
2000
2000
V23100-V4305-B000
V23100-V4312-B000
V23100-V4315-B000
V23100-V4324-B000
1-1393763-8
2-1393763-6
3-1393763-2
3-1393763-8
DIP version high: 2 form a contact, with diode
5
12
15
24
3.5
8.4
10.5
16.8
14
25
47
47
0.75
1.80
2.25
3.60
125
288
112
288
200
500
2000
2000
V23100-V4305-B010
V23100-V4312-B010
V23100-V4315-B010
V23100-V4324-B010
1-1393763-9
2-1393763-7
3-1393763-3
3-1393763-9
DIP version high: 1 form c contact, with diode
5
12
15
24
3.5
8.4
10.5
16.8
14.5
23.5
14.5
49.0
0.75
1.80
2.25
3.60
125
288
112
288
200
500
2000
2000
V23100-V4305-C010
V23100-V4312-C010
V23100-V4315-C010
V23100-V4324-C010
2-1393763-2
3-1393763-0
3-1393763-6
4-1393763-2
DIP version high: 1 form c contact, with diode and electrostatic shield
5
12
15
24
3.5
8.4
10.5
16.8
14.5
23.5
14.5
49.0
0.75
1.80
2.25
3.60
125
288
112
288
200
500
2000
2000
V23100-V4305-C011
V23100-V4312-C011
V23100-V4315-C011
V23100-V4324-C011
2-1393763-3
3-1393763-1
3-1393763-7
4-1393763-3
UI
=
=
Minimum voltage at 23 °C after
preenergizing with nominal
voltage without contact current
UII
Maximum continous voltage at 23 °C
The operating voltage limits UI and UII depend on the
temperature according to the formula:
UI tamb
and
=
KI · UI 23 °C
UII tamb
tamb
=
=
=
KIl · UIl 23 °C
Ambient temperature
UI tamb
Minimum voltage at ambient
temperature, tamb
UII tamb
=
=
Maximum voltage at ambient
temperature, tamb
kI , kII
Factors (dependent on temperature),
see diagram
Ambient temperature tamb [°C]
All specifications subject to change. Consult Tyco Electronics for latest specifications.
7 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Dimensions
SIL version
Dimensions in mm
SIL version
mm
inch
0.780 0.008
L
W
H
19.80
5.08
7.80
-
-
-
0.2
0.2
0.2
-
0.200
0.307
-0.008
-0.008
T
Tw
Tz
3.50 ± 0.2
0.60 ± 0.1
0.25 ± 0.1
0.138 ± 0.008
0.024 ± 0.004
0.010 ± 0.004
Mounting hole layout
Top view
Terminal assignment
Top view
1 form a
with diode
1 form a
standard
A010
A000
All specifications subject to change. Consult Tyco Electronics for latest specifications.
8 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Coil Data (values at 23 °C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
Maximum
voltage Umin voltage Umax
Vdc
Vdc
Vdc
Vdc
mW
Ω / ± 10 %
SIL version: 1 form a contact
5
12
15
24
3.5
8.4
10.5
16.8
22
33
44
44
0.75
1.80
2.25
3.60
50
144
112
288
500
1000
2000
2000
V23100-V4505-A000
V23100-V4512-A000
V23100-V4515-A000
V23100-V4524-A000
4-1393763-4
4-1393763-7
4-1393763-9
5-1393763-1
SIL version: 1 form a contact with diode
5
12
15
24
3.5
8.4
10.5
16.8
22
33
44
44
0.75
1.80
2.25
3.60
50
144
112
288
500
1000
2000
2000
V23100-V4505-A010
V23100-V4512-A010
V23100-V4515-A010
V23100-V4524-A010
4-1393763-5
4-1393763-8
5-1393763-0
5-1393763-2
All specifications subject to change. Consult Tyco Electronics for latest specifications.
9 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Dimensions
Dimensions in mm
Mini SIL version
SIL version
mm
inch
0.780 0.008
L
W
H
15.20
3.80
6.80
-
-
-
0.2
0.2
0.2
-
0.200
0.307
-0.008
-0.008
Tw
Tz
0.50 ± 0.1
0.25 ± 0.1
0.024 ± 0.004
0.010 ± 0.004
Terminal assignment
Mounting hole layout
Top view
Top view
1 form a
with diode
1 form a
standard
A010
A000
Coil Data (values at 23 °C)
Ordering Information
Nominal
voltage
Unom
Operate/set voltage range
Release/
reset voltage
Minimum
Coil
power
Coil
Resistance
Relay
code
Tyco part
number
Minimum
Maximum
voltage Umin voltage Umax
Vdc
Vdc
Vdc
Vdc
mW
Ω / ± 10 %
SIL version: 1 form a contact
5
12
3.5
8.4
13.6
21.6
0.75
1.80
50
205
500
700
V23100-V4605-A000
V23100-V4612-A000
1422026-2
1422026-3
SIL version: 1 form a contact with diode
5
12
3.5
8.4
13.6
21.6
0.75
1.80
50
205
500
700
V23100-V4605-A010
V23100-V4612-A010
1422026-5
1422026-6
All specifications subject to change. Consult Tyco Electronics for latest specifications.
10 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
Contact Data
Type of relay
DIP version
SIL version
1 form a
Mini SIL Version
1 form a
Type of contact/s
1 form a
2 form a
1 form c
Ruthenium
1.2 A
Contact material
Maximum continuous current
Maximum switching current
Maximum switching voltage
1 A
1 A
1 A
0.5 A
0.25 A
0.5 A
0.5 A
at nominal voltage:
5 Vdc
12-24 Vdc
200 Vdc / Vac peak
200 Vdc / Vac peak
175 Vdc
175 Vdc peak
200 Vdc / Vac 200 Vdc / Vac peak
200 Vdc / Vac 200 Vdc / Vac peak
Maximum switching capacity
DC voltage
10 W
3 W
10 W
10 W
AC voltage
10 VA
3 VA
10 VA
10 VA
Initial contact resistance /
measuring condition:
<150 mΩ
Electrical endurance at 12 V / 10 mA
at 24 V / 400 mA
5 x 107
5 x 106
Insulation
Insulation resistance at 500 Vdc
contact coil > 109Ω
Dielectric test voltage (1 min)
contact / coil
contact / contact
1500 Vdc
250 Vdc
1500 Vdc
200 Vdc
1500 Vdc
250 Vdc
1500 Vdc
225 Vdc
High Frequency Data
Capacitance
between coil and contacts
between adjacent contact sets
between open contacts
max. 2 pF
max. 1 pF
max. 1 pF
General Data
Type of relay
DIP version
2 form a
SIL version
1 form a
0.75 ms
0.15 ms
Mini SIL Version
1 form a
Type of contact/s
1 form a
1 form c
1.1 ms
Maximum operate time (including bounce)
Maximum release time
0.75 ms
0.15 ms
0.75 ms
1.6 ms
0.15 ms
Operating temperature range
Storage temperature
-40 °C ... +85 °C
-40 °C ... + 95 °C
Approx. 75 K / W
105 °C
Thermal resistance
Maximum permissible coil temperature
Vibration resistance (function)
30 G
30 G
30 G
30 G
10 to 2000 Hz
50 to 2000 Hz
10 to 2000 Hz
10 to 2000 Hz
Shock resistance, half sinus, 11 ms
Degree of protection
150 G
50 G
150 G
50 G
immersion cleanable, IP 67
any
Mounting position
Resistance to soldering heat
265 °C / 10 s
All specifications subject to change. Consult Tyco Electronics for latest specifications.
11 of 13
AXICOM
Telecom-, Signal and RF Relays
108-98011 Rev. C
Reed V23100-V4 Relay
IM Relays
D2n Relays
4th generation slim line – low profile polarized 2 c/o telecom signal relay
with bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...
200 mW, latching relays with 1 coil 100 mW. The IM relay is available as
through hole and surface mount type (J-Legs and Gull Wings) and capable
to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G
relay on the market. Dielectric strength fulfills the Telcordia requirements
accordingGR1089(2,5kV–2/10µs)andFCCpart68(1,5kV–10/ 160 µs).
The IM relay is tested according CECC/IECQ and certified in accordance
with IEC/EN 60950 and UL 60950.
2nd generation non polarized 2 c/o relay for telecom and various other ap-
plications. Nominal voltage range from 3 ... 48 V, coil power consumption from
150....500mW.TheD2nrelayiscapabletoswitchcurrentsupto3A.Dielectric
strength fulfills the requirements according FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay with
1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption
65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as
through hole or surface mount type and capable to switch currents up to 1
A. Dielectric strength fulfills the requirements according FCC part 68 (1,5
kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7
mm height for THT or 8 mm height for SMT version.
Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. The P2 Relay is available as through hole or surface
mount type and capable to switch currents up to 5 A. Dielectric strength
fulfills the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)
and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according
CECC/IECQ and certified in accordance with IEC/EN 60950 and UL60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive
versions 200 mW. The W11 relay is capable to switch currents up to 3 A.
Dielectric strength 1000 Vrms.
Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
FX2 Relays
Reed Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high
sensitive version, 140... 300 mW for the standard version, latching relays
with 1 coil 100 mW. The FX2 relay is available as through hole type and
capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/
IECQ and certified in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
High sensitive, non polarized relay for telecom and various other applica-
tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range
from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...
280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or
SIL housing and capable to switch currents up to 0,5 A. Integrated diode
and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-
sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or
19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
FT2 / FU2 Relays
Extremely reliable and mature relay family of 1st generation for various signal
switching applications. Available as non polarized, polarized / latching and
relay withAC coil. The benefit is the possibility of combining various contact
sets from 1 up to 6 poles, single and bifurcated contacts, different contact
materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are
available as dust protected and hermetically sealed versions, with plug in or
solder terminals and are capable to switch currents up to 5A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-
ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption
200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and
surface mount type. Dielectric strength fulfills the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 /
160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certified
in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
Other Relays
FP2 Relays
We offer a variety of different relay families for maintenance and replace-
ment purposes. These relays are up to 60 years old now, such as Card
Relay SN (V23030 series), Small General Purpose Relay (V23006 series),
Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series).
Accessories like sockets, hold down springs, etc. optional.
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW.. The FP2 Relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength
fulfills FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according
CECC/IECQ approved.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics
in a small package. All HF series relays are suitable for SMD soldering
processes. Available as non latching or latching versions with 1 or 2 coils
and a nominal coil voltage range from 3 … 24 V, a coil power consumption
of 140 mW or 70 mW (single coil latching types).
Dimensions approx. 14 x 9 mm board space and 5 mm height.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from 3
... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.
50 W hot switching and 50 W RF power carry capability.
Dimensions 14.6 x 7.3 x 10.3 mm.
HF3S: High performance, high power RF relay suitable up to 3 GHz,
50 W hot switching and 150 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
Dimensions approx. 20 x 10 mm board space and 11 mm height.
HF6: High performance, high power RF relay suitable up to 6 GHz,
50 W hot switching and 50 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
All specifications subject to change. Consult Tyco Electronics for latest specifications.
12 of 13
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax
+41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax
+49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
AXICOM
Telecom-, Signal and RF Relays
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752
相关型号:
©2020 ICPDF网 联系我们和版权申明