MLS9100-00752 [TE]
Surface Mount Frequency Synthesizer CDMA 738 - 766 MHz; 表面贴装型频率合成器CDMA 738 - 766兆赫
| 型号： | MLS9100-00752 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Surface Mount Frequency Synthesizer CDMA 738 - 766 MHz |
| 文件： | 总2页 (文件大小：148K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MLS9100-00752
Surface Mount Frequency Synthesizer
CDMA 738 - 766 MHz
Features
12 Lead Package
DETAIL A
•
•
•
•
Integrated VCO/PLL
Miniature SMT Package
Low Phase Noise
+5V Operation
12 11 10
9
8
7
M/ A- COM LTD
PART NO.
DATE CODE
Description
The MLS9100-00752 synthesizer design integrates a high perfor-
mance buffered VCO, PLL circuit and discrete loop filter in a
surface mount package. The SMT packaging provides electrical
shielding, easy PCB assembly and repeatable performance. The
synthesizer is designed for use in CDMA base stations and is
optimised for coverage of the cellular RX band with 86 MHz IF,
30 kHz step size and low phase noise.
1
2
3
4
5
6
0.2
IDENT
0.6
0.8
M/A-COM synthesizers are manufactured in an ISO 9001 certi-
fied facility, incorporating surface mount assembly and automated
electrical testing. This ensures consistent electrical performance
and quality over volume production quantities.
1.0
2.0
DETAIL A
TYP.in 5 POSITIONS
13.2
Electrical Specifications1, T = +25°C, VCC = +5V, ∆F = 30 kHz, F = 15 MHz (unless otherwise stated)
A
R
Parameter
Test Conditions
Units
MHz
dBm
dBc
Min.
738
-3.0
—
Typ.
Max.
766
+3.0
-15
2
Frequency Range (FOUT
)
Over TOP
Over TOP
—
3
RF Output Power (POUT
)
—
Harmonic Output
-18
-85
-90
-81
-110
-130
-147
8
Phase comparison frequency (FOUT ± ∆F)
Reference breakthrough (FOUT±FR)
SSB at 1 kHz offset from carrier
SSB at 10 kHz offset from carrier
SSB at 100 kHz offset from carrier
SSB at 900 kHz offset from carrier
300 Hz to 3 kHz bandwidth
Spurious Output
dBc
—
-70
dBc
—
—
Phase Noise4
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
mrad rms
ms
—
-76
—
-105
-125
—-
—
—
Integrated Phase Noise
—
—-
Frequency Switching Time5,6
VCO Supply Current (ICC1
PLL Supply Current (ICC2
VCO Supply Voltage (VCC1
Over FOUT, measured to within ±500 Hz
—
30
—-
)
mA
—
17
20
)
mA
—
8
12
)
Recommended operating limit
Recommended operating limit
Recommended operating limit
V
+4.75
+4.75
—
—
+5.25
+5.25
—
PLL Supply Voltage (VCC2
Step Size (∆F)7
)
V
—
kHz
30
Reference Frequency (FR)8
0.5 to 2.0 Vpp sine wave into a.c. coupled
CMOS. Recommended operating limit
MHz
3
—
20
1. All specification limits are indicated values and apply over FOUT and
for 50Ω load impedance.
2. Programming control is 3 wire serial CMOS or TTL levels, in accor-
dance with National Semiconductor LMX 1511.
3. Output power window includes variation over operating temperature
range (TOP) -40°C to +85°C and output frequency range (FOUT).
4. See plot for typical phase noise at other frequency offsets.
5. See plot for typical full band switching time measured to within
other offsets from final frequency.
6. Integral PLL lock monitor output, TTL high locked, TTL low un-
locked.
7. Device designed for loop bandwidth of 200Hz.
8. Reference frequency input impedance 10kΩ min.
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
Surface Mount Frequency Synthesizer
MLS9100-00752
Absolute Maximum Ratings1,2
Functional Configuration
Lead
1
2
Function
Ground
Clock Input
Lead
7
8
Function
Parameter
Absolute Maximum
+6.5V
Ground
3
VCO Supply Voltage (VCC1
)
3
Reference
Frequency Input
VCC2 (PLL)
PLL Supply Voltage (VCC2
)
+6.5V
Reference Frequency Voltage
Data, Clock, Strobe Voltages
-0.3V to +6.5V
-0.3V to +6.5V
-45°C to +125°C
See App Note M2032
3
4
V
CC1 (VCO)
9
10
PLL Lock
Data Input
Monitor Output
RF Output
Ground
Storage Temperature (TSTOR
)
5
6
11
12
Strobe/Enable Input
Ground
Solder Assembly Temperature
1. Exceeding these limits may cause permanent damage.
2. Static sensitive, observe appropriate handling precautions.
3. An external series resistor and bypass capacitor will allow opera-
tion at higher supply voltage and will improve power supply decou-
pling and noise suppression.
Environmental Specifications
Devices are designed to function over the operating temperature
range (TOP) of -40°C to +85°C and after exposure to the shock,
vibration, thermal shock and moisture conditions typically encoun-
tered in base station and other infrastructure environments.
Ordering Information
Synthesizers are available in either tape and reel or tube packaging.
To order devices in tape and reel requires the suffix TR to be
added to the part number, i.e. MLS9100-00752TR. Quantity 500
per 13 inch reel, see Application Note M2030.
Typical Performance
Phase Noise
Full Band Switching Time
-40
450
400
350
300
250
200
150
100
50
-60
-80
-100
-120
-140
-160
0
100
1
10
100K
10K
1K
10M
100
1M
10
1K
10K
100K
Output Power vs Temperature
Output Power vs Supply Voltage (Vcc1)
3.0
3.0
2.0
1.0
2.0
1.0
+85 °C
+25 °C
5.25 V
5.00 V
0.0
0.0
4.75 V
-40 °C
-1.0
-2.0
-3.0
-1.0
-2.0
-3.0
720
730
740
750
760
770
780
720
730
740
750
760
770
780
Phase Comparator Spurious
Reference Breakthrough Spurious
0
0
-20
-40
-20
-40
-60
-60
-80
-80
-100
-100
-40
-30
-20
-10
0
10
20
30
40
-20
-15
-10
-5
0
5
10
15
20
V3.00
M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088,
Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks.
Specifications subject to change without notice.
相关型号：
©2020 ICPDF网 联系我们和版权申明