MAOM-010567-V1 [TE]
Optical Modulator Driver;
| 型号： | MAOM-010567-V1 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Optical Modulator Driver |
| 文件： | 总9页 (文件大小：1616K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Functional Diagram
Features
3Vpp to 8Vpp Output Drive Level
Single-Ended Input/Output
High Gain 32 dB
Low Power Dissipation (0.95 W @ 6 Vpp output)
Low Additive Jitter (typically 1.0 ps rms)
25 psec Edge Rates (20/80%)
Lead-Free 11.4x8.9x1.4 mm SMD Package
RoHS* Compliant and 260°C Reflow Compatible
VC1
17
VD1
15
VC2
14
VD2
12
18
9
IN
OUT
3
19
GND
6
VG1
VG2
Description
The MAOM-010567 is a high performance wideband
amplifier for optical modulator driver applications. It
consists of two distributed amplifier MMICs
packaged in a low cost surface mount module with
built-in decoupling capacitors and broadband
chokes. The part requires external DC blocking
capacitors, a low frequency choke and DC control
circuitry for operation in a system environment.
Outline Drawing
(11.4x8.9x1.4mm Surface Mount Package)
The output voltage range is compatible with both EA
and MZ modulators while the BW, edge rates and
jitter performance make the part ideal for optical
transmissions up to 12.5 Gbps.
This device
provides Metro and Long Haul designers with
system critical features such as low power
dissipation (0.95 W at Vo = 6 V), low rail ripple, and
low input drive sensitivity (250 mV at Vo = 6 Vpp).
Additive jitter is typically 1 ps RMS.
Eye Diagram (Vo=6Vpp, 10.7 Gbps)
Vd1=Vd2=5V, Id1=45mA, Id2=145mA, CPC=50%,
The primary application for this device is as a
Mach Zehnder Modulator Driver for 10G NRZ and
40G DP-QPSK optical communications.
The MAOM-010567 is lead-free and ROHS
compliant and is available on a sample test board for
easy evaluation.
Ordering Information
Part Number
MAOM-010567
Package
Bulk Packaging
100 pc. Waffle pack
Sample Board
MAOM-010567-WP100
MAOM-010567-SMB
Environmental Ratings
Moisture Sensitivity Rating
ESD Rating
* Restrictions on Hazardous Substances,
European Union Directive 2002/95/EC.
+/-900V HBM, 500V CDM
MSL3
1
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Absolute Maximum Ratings
Parameter
Drain Voltage1,2
Gate Voltage1,5
Symbol
Vd1, Vd2
Vg1,Vg2
Vc1, Vc2
Id1
Value
8 V
-2.0 V to 0 V
-2.0 V to +3.0 V
100 mA
250 mA
15 mA
Control Voltage Range1,2,5
Drain Supply Current (Id1)1
Drain Supply Current (Id2)1
Gate Supply Current1
Control Supply Current1
CW Input Power1
Id2
Ig1, Ig2
Ic1, Ic2
Pin
15 mA
23 dBm
4.0 Vpp
2.8 W
PRBS Input Voltage1
Power Dissipation3
Operating Channel Temperature4
Vin
Pdiss
Tch
150°C
Mounting Temperature
Tm
260°C
Storage Temperature
Tstg
-65°C to 150°C
1. These values represent maximum operable settings for this device.
2. Drain-to-Gate (Vd-Vc) voltage should not exceed 10V and Vd>Vc at all times.
3. Any combination of supply voltage and current should not exceed this limit at a package base temperature of 80°C.
4. Exceeding this junction operating temperature will have a direct impact on MTTF.
5. Maximum gate and control voltages are limited by current drawn through ESD protection diodes on these pins.
Thermal Information
Parameter
Test Conditions
Tch
θjc
MTTF
Vd1=Vd2=5 V
Id1=50mA, Id2=150 mA
Pdiss2=750 mW
RθJC
98
24
>1e6
Tbase=80°C
Tch is Stage 2 channel temperature
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
Class 1B (+/-900V HBM, 500V CDM) devices.
2
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Recommended Operating Conditions
Parameter
Drain Voltage
Symbol
Vd1, Vd2
Vg1
Units
V
Min.
3
Typ.
5
Max.
7
Gate Voltage 1
V
-1.2
-1.2
-1.2
-1.2
20
—
-0.2
-0.2
0
Gate Voltage 2
Vg2
V
—
Control Voltage 1 Range
Control Voltage 2 Range
Drain Supply Current 1
Drain Supply Current 2
Vc1
V
—
Vc2
V
—
1.5
70
Id1
mA
mA
45
145
Id2
50
220
Base Operating Temperature
Tc
°C
-5
—
85
Electrical Characteristics (Vd1=Vd2=5V, Id1=45mA, Id2=145mA, Tc=25C unless noted otherwise)
Parameter
Symbol
Condition
NRZ
Units
Gbps
Vpp
Min.
9.9
Typ.
—
Max.
12.5
0.8
Input Data Rate6
Input Amplitude6
Vin
Single-Ended AC
0.25
—
Single-Ended AC
5V<Vd1,Vd2<7V
-1.2V<Vc2<1.5V
Output Amplitude6
Vout
Vpp
3
—
8
Output Rise/Fall Time7,8
Additive Jitter (Random)7,8,9
X-Point Control6
Tr/Tf
RJ
Vin=500 mVpp, 10.7Gbps
Vin = 500 mVpp, 10.7 Gbps
—
ps
ps
%
20
—
45
—
—
25
1.0
50
15
15
30
2.0
55
—
CPC
RLin
RLout
Input Return Loss
0.1 GHz to 10 GHz
0.1 GHz to 10 GHz
dB
dB
Output Return Loss
—
Vd1=Vd2=5 V
Vo=6 Vpp
Power Consumption
Pdiss
W
—
0.95
—
6. Verified by design with module mounted on evaluation board shown on sheet 9.
7. Verified at package level RF test, Vout=6Vpp, Vd1=Vd2=5 V, Id1~45 mA, Id2~145 mA
8. Verified at package level RF test, Vout=8Vpp, Vd1=Vd2=7 V, Id1 ~ 60 mA, Id2~195 mA
9. Computed using RSS method where additive jitter = √(Jrms_total^2-Jrms_source^2)
3
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Measured Data
Small Signal Gain and Return Losses
Vd1=Vd2=5V, Id1=50mA, Id2=150mA, Temp = 25C
40
35
30
25
20
15
10
5
0
0
2
4
6
8
10
12
14
16
18
20
Frequency (GHz)
0
-5
-10
-15
-20
-25
-30
-35
-40
S11
S22
0
2
4
6
8
10
12
14
16
18
20
F quency (GHz)
Frerequency (GHz)
4
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Measured Data
Vd1=Vd2=5V, Id1=45mA, Id2=145mA, Vin=500mVpp, Vo=6Vpp
Vg2 and Vc2 adjusted for Vo=6V and 50% crossing
9.9 Gbps, Temp = 25C
12.5 Gbps, Temp = 25C
10.7 Gbps, Temp = 25C
Input Signal, 10.7 Gbps
10.7 Gbps, Temp = -5C
10.7 Gbps, Temp = 85C
5
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Measured Data
10.7Gbps, Vin=500mV unless otherwise noted
Vg2 and Vc2 adjusted for appropriate Vo and 50% crossing
Vo=8Vpp, Vd=7V, Id1=60mA, Id2=194mA, Temp = 25C Vo=3Vpp, Vd=5V, Id1=35mA, Id2=75mA, Temp = 25C
Measured Data
10.7Gbps, Vd1=Vd2=5V, Id1=45 mA, Id2=145 mA, Vo=6Vpp
Vg2 and Vc2 adjusted for Vo=6V and 50% crossing
Vin=800mV, Temp = 25C
Vin=250mV, Temp = 25C
6
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Package Details
ALL DIMENSIONS ARE IN MM
†
Reference Application Note S2083 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 3 requirements.
Pin Descriptions
Number
Name
NC
Description
1,2,4,5,7,8,10,11,13,16
No Connect
3
6
9
Vg1
Stage 1 gate control voltage
Stage 2 gate control voltage
RF Output—DC Coupled
Vg2
RFout
12
Vd2
Stage 2 drain supply voltage
14
15
17
18
19
Vc2
Vd1
Stage 2 cascode control voltage
Stage 1 drain supply voltage
Stage 1 cascode control voltage
RF Input—DC Coupled
Vc1
RFin
GND
AC and DC Ground Pad
7
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Application Information10,11,12,13
VDD
VD2
VD1
C8
VC2
VC1
R1
R2
L1
L2
C5
C7
C6
17
16
15
14
13
12
11
10
C1
C2
RF
OUT
RF
IN
18
9
1
2
3
4
5
6
7
8
C3
C4
VG1
VG2
10. C3 and C4 extend low frequency performance below 30kHz. They may be omitted for applications requiring low frequency cutoff
>100kHz.
11. C6 and C7 are not required because 0.22uF bypass capacitors are included within the module. The DC Impedance looking into VC1 and
VC2 is 700 ohm.
12. L2 and R2 are for compatibility only and are not required to meet performance specifications.
13. C5 may not be required depending on pcb layout.
Parts List
Reference
C1,C2
Description
Broadband DC Block
10uF Decoupling Capacitor
220uH Inductor
Manufacturer
Presidio
Part Number
BB0502X7R104M16VNT9820
GRM21BR61C106K
SLF6028T-221MR26
ELJ-FAR33MF2
C3, C4, C5, C8
L1
Murata
TDK
L2 (optional)
R1, R2 (optional)
330nH
Panasonic
Panasonic
274Ω Resistor
ERJ2RKD274
8
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
MAOM-010567
Optical Modulator Driver
9.9 – 12.5 Gbps
Rev. V1
Suggested PCB Layout
Evaluation Board
GND Vg1 Vd2 Vg2
Vc1 Vd1 Vc2
C8
R1
R2
L1
RF
OUT
RF
IN
L2
C5
C1
C2
C3 C4
Biasing Instructions
Bias ON:
1. Set Vd1=Vd2=Vc2=0V
Bias OFF:
1. Set Vc2=0V
2. Set Vg1=-1.5V, Vg2=-1.5V, Vc1=-0.2V
3. Increase Vd1 and Vd2 to 5V.
4. Set Vc2=+0.2V.
2. Set Vd1=Vd2=0V
3. Set Vc1=Vg1=Vg2=0V
5. Increase Vg1 until Id1=45mA.
6. Increase Vg2 until Id2=145mA.
7. Adjust Vc2 to increase or decrease the output swing.
8. Adjust Vg2 to push the crossover point up or down.
Typical Bias Conditions14
Vo
(Vpp)
Vd1
(V)
Id1
(mA)
Vd2
(V)
Id2
(mA)
Vg1
(V)
Vg2
(V)
Vc1
(V)
Vc2
(V)
3.0
6.0
8.0
5.0
5.0
7.0
37
45
60
5.0
5.0
7.0
75
-1.08
-1.02
-0.94
-1.07
-0.92
-0.77
-0.2
-0.2
-0.2
-0.52
0.15
0.50
145
195
14. GaAs MMIC devices are susceptible to damage from Electrostatic Discharge. Proper precautions should be observed during handling,
assembly and test.
9
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
相关型号：
©2020 ICPDF网 联系我们和版权申明