MA4ST079-083_15 [TE]

Surface Mount Hyperabrupt Wide-Band Tuning Varactors;
MA4ST079-083_15
型号: MA4ST079-083_15
厂家: TE CONNECTIVITY    TE CONNECTIVITY
描述:

Surface Mount Hyperabrupt Wide-Band Tuning Varactors

文件: 总3页 (文件大小:98K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MA4ST079 thru MA4ST083 Series  
Surface Mount Hyperabrupt Wide-Band Tuning Varactors  
Rev. V6  
Features  
SOT-23  
Low Cost  
Very High Capacitance Ratio from 1 to 8 Volts  
Surface Mount Package  
High Quality Factor  
Useful for Battery Applications  
SPC Monitored Ion Implantation for Excellent C-  
V Repeatability  
Singles and Common Cathode Pairs  
Available in Tape and Reel  
Lead-Free (RoHs Compliant) equivalents avail-  
able with 260°C reflow compatibility  
Absolute Maximum Ratings 1,2  
@ TA=+25 °C (Unless Otherwise Noted)  
Description  
Parameter  
Reverse Voltage  
Forward Current  
Absolute Maximum  
The MA4ST079 through MA4ST083 series of silicon  
hyperabrupt junction tuning varactors is produced  
with ion implantation and advanced epitaxial growth  
techniques. These diodes have thermal oxide pas-  
sivation, and feature very high capacitance ratio and  
quality factor. They are well suited for use from the  
sub-HF through UHF frequency range. The standard  
capacitance tolerance is ±10%, with tighter toler-  
ances available. Capacitance matching at one or  
more bias voltages is also available.These diodes  
are offered with standard Sn/Pb plating , as well as  
100% matte Sn plating on our RoHs compliant  
equivalent devices.  
12 V  
50 mA  
Power Dissipation  
Operating Temperature  
Storage Temperature  
50mW @25°C  
-65 °C to +125 °C  
-65 °C to +125 °C  
1. Operation of this device above any one of these parameters  
may cause permanent damage.  
2. Please refer to application note M538 for surface mounting  
instructions  
Configurations  
Applications  
The MA4ST079 through MA4ST083 series of hy-  
perabrupt junction tuning varactors is suggested for  
usage where a large frequency change is required  
with only a small change in tuning voltage. This se-  
ries is appropriate for usage in wide band voltage-  
controlled oscillators and voltage controlled filters  
which require the largest rate of change of capaci-  
tance with voltage. The large change in capacitance  
from 1 to 8 volts makes them very attractive for bat-  
tery operated or other systems with limited available  
control voltage. The MA4ST079 through MA4ST083  
family can be used in VCOs and VTFs from approxi-  
mately 100 KHz through the UHF frequency band.  
Ordering Information  
Part Number  
MA4ST079  
MA4ST080  
MA4ST081  
MA4ST082  
MA4ST083  
RoHs Compliant Part Number3  
MAVR-000079-XXXXXX  
MAVR-000080-XXXXXX  
MAVR-000081-XXXXXX  
MAVR-000082-XXXXXX  
MAVR-000083-XXXXXX  
3. Suffix refers to package style , configuration and packaging  
requirements. See electrical specification for complete  
part number offerings  
Specifications are subject to change without prior notification  
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions  
is considering for development. Performance is based on target specifications, simulated results,  
and/or prototype measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology  
Solutions has under development. Performance is based on engineering tests. Specifications are  
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macomtech.com for additional data sheets and product information.  
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make  
changes to the product(s) or information contained herein without notice.  
Commitment to produce in volume is not guaranteed.  
MA4ST079 thru MA4ST083 Series  
Surface Mount Hyperabrupt Wide-Band Tuning Varactors  
Rev. V6  
Electrical Specifications @ TA = +25 °C  
Breakdown Voltage @ IR = 10µA, Vb = 12 V Minimum  
Reverse Leakage Current @ VR =10V, IR = 100 nA Maximum  
Temperature Coefficient of Capacitance @VR=8 Volts, TCC=400ppm/°C Typical  
Typ.  
Capacitance  
Ratio  
Ct (pF) 2  
Typical Q  
Ct1V/Ct8V  
Part Number  
Base 1  
RoHS Compliant  
Part No. Base 1  
VR = 1 V  
f = 1 MHz  
VR = 2.5 V  
f = 1 MHz  
VR = 4 V  
f = 1 MHz f = 1 MHz  
VR = 8 V  
VR = 1V/8V  
f = 1 MHz  
VR = 4 V  
f = 50 MHz  
Min.  
87.4  
40.0  
40.0  
16.2  
16.2  
11.5  
11.5  
7.9  
Min.  
Max.  
59.5  
27.3  
27.3  
11.1  
11.1  
8.0  
Max  
27.3  
13.1  
13.1  
5.2  
Max.  
11.8  
5.5  
5.5  
2.4  
2.4  
1.8  
1.8  
1.3  
1.3  
Typ.  
9.1  
8.9  
8.9  
8.5  
8.5  
8.2  
8.2  
7.8  
7.8  
Typ.  
80  
MA4ST079CK-287T  
MA4ST080-287T  
MAVR-000079-0287FT  
MAVR-000080-0287AT  
MAVR-000080-0287FT  
MAVR-000081-0287AT  
MAVR-000081-0287FT  
MAVR-000082-0287AT  
-
48.7  
22.3  
22.3  
9.1  
150  
150  
300  
300  
350  
350  
450  
450  
MA4ST080CK-287T  
MA4ST081-287T  
MA4ST081CK-287T  
MA4ST082-287T  
9.1  
5.2  
6.6  
3.8  
MA4ST082CK-287T  
MA4ST083-287T  
6.6  
8.0  
3.8  
MAVR-000083-0287AT  
MAVR-000083-0287FT  
4.5  
5.5  
2.6  
MA4ST083CK-287T  
7.9  
4.5  
5.5  
2.6  
Typical Performance Curves 3  
Total Capacitance vs. Reverse Voltage  
Nominal vs. Reverse Voltage  
1. The prefix defines package style, configuration and packaging information. Contact representative for complete part identification.  
2. Capacitance @ 1 MHz  
3. Performance curves also reflect that of the RoHs equivalent part  
Specifications are subject to change without prior notification  
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions  
is considering for development. Performance is based on target specifications, simulated results,  
and/or prototype measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology  
Solutions has under development. Performance is based on engineering tests. Specifications are  
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macomtech.com for additional data sheets and product information.  
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make  
changes to the product(s) or information contained herein without notice.  
Commitment to produce in volume is not guaranteed.  
MA4ST079 thru MA4ST083 Series  
Surface Mount Hyperabrupt Wide-Band Tuning Varactors  
Rev. V6  
Case Styles  
SOT-23 (Case Style 287)  
SOT-23 (Case Style 287)  
INCHES  
MILLIMETERS  
DIM.  
MIN.  
MAX.  
MIN.  
MAX.  
A
B
C
D
E
F
G
H
J
0.048  
0.008  
0.040  
0.020  
0.006  
0.119  
0.056  
1.22  
0.20  
1.00  
0.50  
0.15  
3.00  
1.40  
0.013  
0.003  
0.110  
0.047  
0.35  
0.08  
2.80  
1.20  
0.95 typical  
1.90 typical  
2.60  
0.60  
0.037 typical  
0.075 typical  
K
L
0.103  
0.024  
DIM.  
M
GRADIENT  
10° max.  
2° . . .30°  
Mounting Information  
The illustration indicates the recommended  
mounting pad configuration for the  
N
SOT-23 package. Solder paste containing flux  
should be screened onto the pads to a thickness of  
0.005- 0.007 inches. The plastic package is placed  
in position, firmly adhering to the solder paste.  
SOT-23  
Permanent attachment is performed by a reflow  
soldering procedure during which the tab  
temperature does not exceed +275 °C and the body  
temperature does not exceed +250 °C, for standard  
models and +260 °C for the RoHS compliant  
devices.  
Please refer to Application Note M538 for surface  
mounting instructions.  
Specifications are subject to change without prior notification  
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions  
is considering for development. Performance is based on target specifications, simulated results,  
and/or prototype measurements. Commitment to develop is not guaranteed.  
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology  
Solutions has under development. Performance is based on engineering tests. Specifications are  
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.  
North America Tel: 800.366.2266 / Fax: 978.366.2266  
Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300  
Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298  
Visit www.macomtech.com for additional data sheets and product information.  
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make  
changes to the product(s) or information contained herein without notice.  
Commitment to produce in volume is not guaranteed.  

相关型号:

MA4ST079CK

Variable Capacitance Diode, 49pF C(T),
CMLMICRO

MA4ST079_1

Surface Mount Hyperabrupt Wide-Band Tuning Varactors
TE

MA4ST080

Surface Mount Hyperabrupt Wide-Band Tuning Varactors
TE

MA4ST081

Surface Mount Hyperabrupt Wide-Band Tuning Varactors
TE

MA4ST081CK

Variable Capacitance Diode, 9.1pF C(T),
CMLMICRO

MA4ST082

Surface Mount Hyperabrupt Wide-Band Tuning Varactors
TE

MA4ST083

Surface Mount Hyperabrupt Wide-Band Tuning Varactors
TE

MA4ST083

Variable Capacitance Diode, 4.5pF C(T),
CMLMICRO

MA4ST083CK

Variable Capacitance Diode, 4.5pF C(T),
CMLMICRO

MA4ST1103

High Tuning Ratio Silicon Hyperabrupt Varactor Diode
TE

MA4ST1103-1141T

High Tuning Ratio Silicon Hyperabrupt Varactor Diode
TE

MA4ST1200

Low Tuning Voltage/Low Rs Silicon Hyperabrupt Varactor Diode
TE