CKF-38-70010 [TE]
Mid-Priced CMOS IC Time Delay Relay; 中等价位的CMOS IC延时继电器
| 型号： | CKF-38-70010 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Mid-Priced CMOS IC Time Delay Relay |
| 文件： | 总2页 (文件大小：51K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Catalog 1308242
Issued 3-03
P&B
CK series
Mid-Priced CMOS IC Tim e Delay Relay
• Choice of timing modes
– Delay on operate
– Delay on release
– Delay on dropout (no input required during timing)
– Interval on
• Knob or resistor adjustable types
• 10A output relay with DPDT contacts
• Various models time from 0.1 to 180 sec.
File E22575
File LR15734
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Contact Data @ 25°C
Tim ing Modes
Arrangem ents: 2 Form C (DPDT).
Material: Silver-cadmium oxide alloy.
Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @
120VAC.
Delay on operate – Delay period begins when input voltage is applied. At
the end of the delay period, the relay will operate and will not release until
input voltage is removed. Reset occurs when input voltage is reapplied.
INPUT
Expected Mechanical Life: 10 million operations.
Expected Electrical Life: 100,000 operations, min., at rated load.
ON
OFF
ON
OFF
VOLTAGE
N.O. RELAY
CONTACTS
➛
TIME
➛
Delay on release – Input voltage must be applied continuously to operate
the internal relay. When the control switch is closed, the relay energizes.
When the control switch is opened, timing begins. When timing is
complete, the relay will de-energize. Time may be reset to zero during
timing by closing the control switch.
Initial Dielectric Strength
Betw een Open Contacts: 500V rms, 60 Hz.
Betw een All Other Conductors: 500V rms, 60 Hz.
CONTROL
SWITCH
ON
OFF
➛
N.O. RELAY
CONTACTS
ON
OFF
Input Data @ 25°C
TIME
➛
Voltage: 24 & 120VAC and 12 & 24VDC.
Pow er Requirem ent: AC Types: Typically less than 3 VA.
DC Types: Typically less than 3 W.
Initiate Tim e: Delay on dropout timers must have input voltage applied for
a minimum of three seconds for dropout function to be
guaranteed.
Delay on dropout – The relay operates immediately upon application of
input voltage. Timing begins when input voltage is removed. When timing
is complete, the relay will de-energize. Reset occurs when input voltage is
reapplied.
Transient Protection: Yes.
INPUT
Reverse Voltage Protection: Yes.
ON
OFF
ON
OFF
VOLTAGE
N.O. RELAY
CONTACTS
Input Voltages & Lim its @ 25°C
➛
TIME
➛
Voltage
Type
Nom inal
Voltage
Minim um
Voltage
Maxim um
Voltage
Interval on (w ith control sw itch) – Input voltage must be applied
continuously to operate the internal relay. The relay energizes and timing
begins when the external switch is closed. At the end of the time delay
period the relay will de-energize. Reset is accomplished by opening and
reclosing the control switch.
AC
DC
24
120
20
105
28
130
12
24
11
20
13
32
Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage).
CONTROL
SWITCH
ON
OFF
AC models will operate on 50 or 60 Hz.
➛
N.O. RELAY
CONTACTS
ON
OFF
TIME
➛
Environm ental Data
Tem perature Range: Storage: -55°C to +85°C.
Operating: -10°C to +55°C.
Tim ing Specifications
Tim ing Ranges: From 0.1 to 180 sec.
Tim ing Adjustm ent: External resistor and knob adjustable.
Tolerance (for AC units add ±1/2 cycle 60 Hz.):
Knob Adj. Types:–0, +20% of max. specified at high end of timing range;
min. specified, or less, at low end.
Mechanical Data
Fixed Types:
±5% .
Term ination: 8- or 11-pin octal style plug.
Res. Adj. Types: ±5% at high end of timing range; min. specified, or less,
at low end.
Enclosure: White plastic case. Knob adjustable types have dial scale for
reference only.
Delta Tim e (for AC units add ±1 cycle 60 Hz.): ±10% .
Repeatability (for AC units add ±1 cycle 60 Hz.): ±2% .
Release Tim e: 60 ms, typ.; 100 ms, max.
Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on)
screw terminal sockets. 11-pin types fit either 27E123 or
27E892 (snap-on) screw terminal sockets.
Recycle Tim e: 60 ms, typ.; 100 ms, max.
Weight: 6 oz. (170g) approximately.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1224
Catalog 1308242
Issued 3-03
P&B
Ordering Inform ation – Authorized distributors are m ore likely to stock boldface item s listed below .
Delay On Release Models
Delay On Operate Models
Voltage
Tim e
Adjustm ent
Wiring Dia. Part Num ber
Voltage
Tim e
Adjustm ent
Wiring Dia. Part Num ber
0.1 to 10 Sec.
0.6 to 60 Sec.
1.8 to 180 Sec.
CKB-38-78010
CKB-38-78060
CKB-38-78180
24VAC
0.1 to 10 Sec.
Knob
1
CKB-38-30010
120VAC
Knob
3
0.1 to 10 Sec.
0.6 to 60 Sec.
1.2 to 120 Sec.
1.8 to 180 Sec.
CKB-38-70010
CKB-38-70060
CKB-38-70120
CKB-38-70180
120VAC
Knob
1
120VAC
24VDC
0.1 to 10 Sec.
0.1 to 10 Sec.
Resistor
Resistor
4
4
CKF-38-78010
CKH-38-38010
120VAC
12VDC
0.1 to 10 Sec.
0.1 to 10 Sec.
Resistor
Knob
2
1
CKF-38-70010
CKD-38-20010
Delay On Dropout Models
Voltage
Tim e
Adjustm ent
Wiring Dia. Part Num ber
24VAC
0.1 to 10 Sec.
0.6 to 60 Sec.
Knob
1
CKB-38-37010
CKB-38-37060
0.1 to 10 Sec.
0.6 to 60 Sec.
1.2 to 120 Sec.
CKB-38-77010
CKB-38-77060
CKB-38-77120
120VAC
Knob
1
Interval On Models
Voltage
Tim e
Adjustm ent
Wiring Dia. Part Num ber
CKB-38-79010
120VAC
0.1 to 10 Sec.
Knob
3
Outline Dim ensions
2.406 MAX.
(61.1)
➛
➛
➛
2.937 MAX.
(74.6)
1.781 MAX.
(45.2)
.56
(14.2)
.60
➛
➛
➛
(15.2)
Wiring Diagram s – Bottom View s (pins num bered clockw ise from keyw ay)
EXTERNAL RESISTOR
EXTERNAL RESISTOR
EXTERNAL
CONTROL
SWITCH*
EXTERNAL
CONTROL
SWITCH*
_
+
_
+
CONTINUOUS
SUPPLY
INPUT
CONTINUOUS
SUPPLY
_
_
+
+
INPUT
INPUT
INPUT
(DC POLARITY INDICATED)**
(DC POLARITY INDICATED)**
(DC POLARITY INDICATED)**
(DC POLARITY INDICATED)**
Fig.1
8 Pin
Fig. 2
11 Pin
Fig. 3
11 Pin
Fig. 4
11 Pin
* If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A “dry
circuit” switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly.
** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”.
External Resistor Chart
See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook.
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
1225
相关型号：
©2020 ICPDF网 联系我们和版权申明