AT20-0107-TR [TE]
Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-2.0 GHz; 数字衰减器31.5分贝, 6位, TTL驱动器, DC- 2.0 GHz的型号: | AT20-0107-TR |
厂家: | TE CONNECTIVITY |
描述: | Digital Attenuator 31.5dB, 6-Bit, TTL Driver, DC-2.0 GHz |
文件: | 总4页 (文件大小:249K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
RoHS
Compliant
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-2.0 GHz
AT20-0107
V5
Features
Functional Schematic
•
•
Attenuation: 0.5 dB Steps to 31.5 dB1
Temperature Stability: ±0.18 dB from –40ºC to +85ºC
Typ.
•
•
•
•
•
•
•
Low DC Power Consumption
Surface Mount Package
Integral TTL Driver
High Intercept Point
Low Cost/High Performance
Lead-Free CR-13 Package
260°C Reflow Compatible
Description
M/A-COM's AT20-0107 is a GaAs FET 6-bit digital
attenuator with a 0.5 dB minimum step size and a
31.5 dB total attenuation. This attenuator and inte-
gral TTL driver is in a ceramic 24-lead surface mount
package. The AT20-0107 is ideally suited for use
where accuracy, fast speed, very low power
consumption and low intermodulation products are
required. Typical applications include dynamic range
setting in precision receiver circuits and other gain/
leveling control circuits. Available with enhanced
performance as fully hermetic version. Environmen-
tally screenable as P/N AT-107-PIN.
Pin Configuration
Pin No.
Function
GND
GND
GND
C16
Pin No.
13
Function
RF2
1
2
14
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
RF1
3
15
4
16
5
C8
17
6
Vee
18
7
Vcc
19
Ordering Information
8
C4
20
9
C2
21
Part Number
Package
10
11
12
C1
22
AT20-0107-PIN
Bulk Packaging
C0.5
GND
23
AT20-0107-TR
AT20-0107-TB
1000 piece reel
24
Sample Test Board
The metal bottom of the case must be connected to RF and DC
ground.
Note: Reference Application Note M513 for reel size
information.
Note: Die quantity varies.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-2.0 GHz
AT20-0107
V5
Electrical Specifications: TA = +25°C2
Parameter
Insertion Loss
Test Conditions
Frequency
DC - 2.0 GHz
DC - 2.0 GHz
Units
dB
Min
—
Typ
3.2
—
Max
—
3.8
Attenuation Accuracy1,3,4
Any Bit or Combination of
Bits
dB
—
+(.3 +7% of atten.)
-(.2 +1% of atten.)
VSWR
Full Range
DC - 2.0 GHz
Ratio
—
—
1.8:1
Trise, Tfall
Ton, Toff
Transients
10% to 90%
50% Control to 90%/10%
RF
—
—
—
nS
nS
mV
—
—
—
50
150
50
—
—
—
In-band (peak to peak)
1 dB Compression 5
Input Power
Input Power
50 MHz
0.5 - 2.0 GHz
dBm
dBm
—
—
+21
+29
—
—
5
Input IP3
Two Tone Inputs up to
+5 dBm
50 MHz
0.5 - 2.0 GHz
dB
dB
—
—
+35
+48
—
—
5
Input IP2
Two Tone Inputs up to
+5 dBm
50 MHz
0.5 - 2.0 GHz
dB
dB
—
—
+75
+79
—
—
Vcc
-Vee
—
—
—
—
V
V
4.5
-8.0
5.0
—
5.5
-5.0
Icc
Vcc = 4.5 to 5.5V
—
—
mA
mA
—
—
—
—
6.0
1.0
-Iee
-Vee = -5.0 to -8.0V
1. Above reference insertion loss.
2. All specifications apply when operated with bias voltages of +5V for VCC and –5.0 V to –8.0 V for VEE and 50Ω impedance at all ports
unless otherwise stated.
3. This attenuator is guaranteed monotonic.
4. For the attenuator to meet the guaranteed specifications, it is necessary to have a DC return on either RF1 or RF2. The DC return can be
either a 10KΩ resistor, or an RF choke.
5.
VEE = -5 V for the typical numbers given.
Absolute Maximum Ratings 6,7
Recommended PCB Configuration
Parameter
Absolute Maximum
Max. Input Power
0.05 GHz
+27 dBm
+34 dBm
0.5 - 2.0 GHz
+Vcc
+5.5V
-Vee
-8.5V
Control Voltage8
Operating Temperature
Storage Temperature
-0.5V to VCC +0.5V
-40°C to +125°C
-65°C to +150°C
6. Exceeding any one or combination of these limits may cause
permanent damage to this device.
7. M/A-COM does not recommend sustained operation near
these survivability limits.
8. Standard CMOS TTL interface, latch-up will occur if logic
signal is applied prior to power supply.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-2.0 GHz
AT20-0107
V5
Truth Table (Digital Attenuator)
Handling Procedures
C16 C8 C4 C2 C1 C0.5
Attenuation
Loss, Reference
0.5 dB
Please observe the following precautions to avoid
damage:
0
0
0
0
0
0
1
1
0
0
0
0
0
1
0
1
0
0
0
0
1
0
0
1
0
0
0
1
0
0
0
1
0
0
1
0
0
0
0
1
0
1
0
0
0
0
0
1
Static Sensitivity
1.0 dB
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
2.0 dB
4.0 dB
8.0 dB
16.0 dB
31.5 dB
Typical Performance Curves
0 = TTL Low; 1 = TTL High
Attenuation Accuracy vs. Frequency
Insertion Loss vs. Frequency
+ 85 °C
+ 25 °C
- 40 °C
1 dB
2 dB
0.5 dB
4 dB
4
3
2
0.6
0.4
0.2
0
- 0.2
- 0.4
- 0.6
1
0
0
0.5
1
1.5
2
0
0.5
1
1.5
2
Frequency (GHz)
Frequency (GHz)
RF1 VSWR vs. Frequency
Attenuation Accuracy vs. Frequency
Loss & 0.5 dB
2 dB
1 dB
4 dB
8 & 16 dB
16 dB
8 dB
31.5 dB
2
0.8
0.6
1.8
1.6
1.4
1.2
1
0.4
0.2
0
- 0.2
- 0.4
- 0.6
- 0.8
0
0.5
1
1.5
2
0
0.5
1
1.5
2
Frequency (GHz)
Frequency (GHz)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
Digital Attenuator
31.5 dB, 6-Bit, TTL Driver, DC-2.0 GHz
AT20-0107
V5
Typical Performance Curves
Lead-Free, CR-13 Ceramic Package†
RF2 VSWR vs. Frequency
8 dB
1 & 2 dB
4 dB
Loss & 0.5 dB
16 dB
2
1.8
1.6
1.4
1.2
1
0
0.5
1
1.5
2
Frequency (GHz)
†
Reference Application Note M538 for lead-free solder reflow
recommendations.
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
相关型号:
©2020 ICPDF网 联系我们和版权申明