AT-259SMB [TE]
Voltage Variable Absorptive Attenuator 12 dB, DC - 2.0 GHz; 可变电压衰减器吸收12分贝, DC - 2.0 GHz的型号: | AT-259SMB |
厂家: | TE CONNECTIVITY |
描述: | Voltage Variable Absorptive Attenuator 12 dB, DC - 2.0 GHz |
文件: | 总3页 (文件大小:66K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
AT-259
Voltage Variable Absorptive Attenuator
12 dB, DC - 2.0 GHz
Rev. V5
Functional Schematic
Features
•
•
•
•
•
•
•
•
Attenuation: 12 dB at 1 GHz
Low Intermodulation Products
Low DC Power Consumption: 50 μW
Single Voltage Control: 0 to -4 Volts
Nanosecond Switching Speed
Temperature Range: -40°C to +85°C
SOT-143 Plastic Package
Tape and Reel Packaging Available
Description
M/A-COM’s AT-259 is a GaAs MMIC voltage
variable absorptive attenuator in a low cost SOT-143
4-Lead surface mount plastic package. The AT-259
is ideally suited for use where attenuation fine
tuning, fast switching and very low power
consumption are required.
Typical applications include radio, cellular, GPS
equipment and other automatic gain/level control
circuits.
Pin Configuration
Pin No.
Function
Ground
VC
Pin No.
Function
The AT-259 is fabricated with a monolithic GaAs
MMIC using a mature 1 micron process. The
process features full chip passivation for increased
performance and reliability.
1
2
3
4
RF2
RF1
Absolute Maximum Ratings 3
Ordering Information 1,2
Parameter
Input Power
Absolute Maximum
+21 dBm
Part Number
AT-259
Package
Bulk Packaging
Control Voltage
+5V, -8.5V
AT-259TR
AT-259SMB
Forward Tape and Reel
Sample Board
Operating Temperature
Storage Temperature
-40°C to +85°C
-65°C to +150°C
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
3. Exceeding any one or combination of these limits may
cause permanent damage to this device.
†
Reference Application Note M538 for lead-free solder reflow recommendations.
Meets JEDEC moisture sensitivity level 1 requirements.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
AT-259
Voltage Variable Absorptive Attenuator
12 dB, DC - 2.0 GHz
Rev. V5
Electrical Specifications: TA = 25°C, Z0 = 50 Ω
Parameter
Test Conditions4
Frequency Units Min.
Typ.
Max.
DC - 0.1 GHz
DC - 0.5 GHz
DC - 1.0 GHz
DC - 2.0 GHz
dB
dB
dB
dB
—
—
—
—
2.9
3.0
3.2
3.4
3.1
3.2
3.5
3.8
Insertion Loss
—
5 dB Attenuation
10 dB Attenuation
15 dB Attenuation
DC - 2.0 GHz
DC - 2.0 GHz
DC - 2.0 GHz
dB
dB
dB
—
—
—
+ 0.2
+ 2.3
+ 7.0
+ 0.4
+ 2.5
+ 7.5
Flatness
(Peak to Peak)
Output Impedance
VSWR
—
—
—
—
—
—
Ohms
Ratio
nS
—
—
—
—
—
50
2.1:1
3
—
—
—
—
—
—
Trise, Tfall
Ton, Toff
10% to 90% RF, 90% to 10% RF
50% Control to 90% RF, 50% Control to 10% RF
In Band
nS
5
Transients
mV
10
Linear Operation
Absolute maximum Input Power
dBm
dBm
—
—
—
—
13
21
Power Handling
IP2
—
Measured Relative to Input Power
(For two-tone Input Power Up to +5 dBm)
0.05 GHz
0.5 - 2.0 GHz
dBm
dBm
—
—
34
47
—
—
Measured Relative to Input Power
(For two-tone Input Power Up to +5 dBm)
0.05 GHz
0.5 - 2.0 GHz
dBm
dBm
18
18.5
315
365
—
—
IP3
4. Control voltage: 0 to -4 volts @ 20 µA typical.
5. For levels above 6 dB attenuation. For levels below 6 dB, the minimum specification numbers apply.
SOT-143†
†
Meets JEDEC moisture sensitivity level 1 requirements.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
AT-259
Voltage Variable Absorptive Attenuator
12 dB, DC - 2.0 GHz
Rev. V5
Typical Performance Curves
Insertion Loss vs. Frequency
Attenuation vs. Frequency
20
4
5
10
15
15
10
5
3
+25°C
-40°C
+85°C
2
1
0
0
0.0
0.5
1.0
1.5
2.0
0.0
0.5
1.0
1.5
2.0
Frequency (GHz)
Frequency (GHz)
VSWR vs. Frequency
Attenuation vs. Control Voltage, F = 950 MHz
2.0
15
1.8
1.6
1.4
1.2
1.0
10
0
12
5
5
0
0.0
0.5
1.0
1.5
2.0
-3.0
-2.5
-2.0
-1.5
-1.0
-0.5
0.0
Frequency (GHz)
Control Voltage (V)
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
3
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明