9-1393116-1 [TE]
Optional indicator lamp and push-to-test button;
| 型号： | 9-1393116-1 |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | Optional indicator lamp and push-to-test button |
| 文件： | 总4页 (文件大小：467K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
General Purpose
Panel/Plug-in Relays
Potter & Brumfield
KUMP Series Panel Plug-in Relay
n
n
15 amp rating
Contact arrangements 1-3 form A, 1-3 form B, 1-3 form C, 1 form X,
1 form Y, 1 form Z
n
n
n
n
Open or enclosed
Plain or bracket mount dust covers
Optional indicator lamp and push-to-test button
Several termination and mounting styles
Typical applications
Hospital beds, semiconductor wafer equipment, boom/bucket lifts.
Coil versions, AC coil
Approvals
Coil
code
Rated
voltage
VAC
6
Operate
voltage
VAC
1.±
±0.2
20.4
±02.0
204.0
Coil
resistance
Ω±±15
4.2
±8
72
±700
7200
Rated coil
power
VA
UL E22171; CSA LR±1734
Technical data of approved types on request.
6
2.8
2.8
2.8
2.9
Contact Data
Contact arrangement
±2
24
±2
24
±, 2 and 3 form A (NO); ±, 2 and 3 form B (NC);
±, 2 and 3 form C (CO); ± form X (NO-DM);
± form Y (NC-DB); ± form Z (CO-DB-DM)
277VAC
±20
240
±20
240
2.9
Rated voltage
Rated current
All figures are given for coil without preenergization, at ambient temperature +23°C.
±1A
Contact material
AgCdO
AgSnOInO
Min. recommended contact load
Frequency of operation
Operate/releases time max.
Bounce time max.
300mA, ±2VDC 300mA, ±2VDC
Insulation Data
360 ops./hour
±1/±0ms
±7ms
360 ops./hour
Initial dielectric strength
between open contacts
between contact and coil
between adjacent contacts
Initial insulation resistance
between insulated elements
±200Vrms
2200Vrms
2200Vrms
Contact ratings
Type
Load
Cycles
±00MΩ, 100VDC
UL 508
AgCdO
Other Data
±1A, 277VAC
±/2HP, ±20VAC
±0A, 240VAC
±0A, 32VDC
1FLA, ±1LRA, 210VAC
1A, ±20VAC, tungsten
0.1A, 210VAC
0.1A, ±21VDC
±0FLA, 40LRA, ±21VAC
3A, 600VAC
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature
DC coil
Enclosed relays: -41ºC to 70ºC
Open relays: ±1ºC higher maximum
Enclosed relays, 3 pole: -41°C to +41°C
Enclosed relays, ± and 2 pole: -41ºC to +11ºC
Open relays: ±1°C higher maximum
AC coil
Category of environmental protection
IEC 6±8±0
Terminal type
±/2HP, 480VAC
±/2HP, 600VAC
±HP, 480VAC, 3 phase
RT0 - open relay; RTI - dust protected
Quick connects (QC), .±87, .201 or .210:
PCB-THT
AgSnOInO
±1A, 277VAC, pf = 0.8
±0A, 277VAC, pf = 0.8
±1x±03
Terminal retention, push force
QC .201
QC .±87, QC .210, PCB
Weight
±00x±03
±7 lbs for 3s
21 lbs for 3s
Mechanical endurance
±0x±06 ops.
81g
Packaging/unit
tray/21 pcs., box/±10pcs.
Coil Data
Coil voltage range
1 to ±±0VDC
6 to 240VAC
Class B
Accessories
For details see datasheet
Sockets and Accessories, KUP Relays
Coil insulation system according UL
Coil versions, DC coil
Product Code Description
Coil
code
Rated
voltage
VDC
1
Operate
voltage
VDC
3.71
4.1
Coil
resistance
Ω±±05
2±
32.±
±20
472
±800
±0000
Rated coil
power
W
±.2
±.±21
±.2
±.21
±.3
±.21
27E893
27E±2±
27E043
27E046
27E067
27E396
DIN socket (use 20C3±8 clip)
Track mount socket (use 20C3±4 clips)
Chassis mount/solder eyelet socket (use 20C214 clip)
Chassis mount/PCB socket (use 20C214 clip)
Chassis mount/quick connect socket (use 20C214 clip)
Snap-in/quick connect socket (use 20C214 clip)
1
6
6
±2
24
48
±±0
±2
24
48
±±0
9.0
±8.0
36.0
82.1
All figures are given for coil without preenergization, at ambient temperature +23°C.
1
03-2015, Rev. 0315
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
General Purpose
Panel/Plug-in Relays
Potter & Brumfield
KUMP Series Panel Plug-in Relay (Continued)
Dimensions
Seated Heights For KUM (open) Relays
KUM bracket type
±.39±” (31.33mm) for #6-32 stud
with .2±8” (1.14mm) locating tab.
2.43 MAX.*
(61.72)
2.33 MAX.**
(59.18)
2.29 MAX.***
(58.17)
1. 437
(36.50)
.19
(4.8)
X
X
±.12” (38.6mm) for bracket
with 2-#6 32 tapped holes.
.63
(16.0)
.63
(16.0)
X
±.282” (32.16mm) for #6-32 tapped core
2.27 MAX.*
(57.7)
with .±21” (3.±8mm) or .2±8” (1.14mm) locating tab.
2.171 MAX.**
(55.14)
.16
(4.1)
(2) #6-32 THREAD
TAPPED HOLES
2.125 MAX.***
(53.98)
2.046” (1±.97mm) for relay
with printed circuit terminals.
KUM stud type
1.468 MAX.
(37.29)
.
.031 REF
2.27 MAX.*
(57. 7)
2.171 MAX.**
(55.14)
2.125 MAX.***
(53.98)
.031 REF.
(.79)
(.79)
STUD TYPE also available with .±21” (3.±8mm)
tab, as well as without stud and locating tab.
Models without stud have core tapped #6-32
1
4
2
5
3
6
1.282 MAX.
(35.56)
1.391
(35.33)
7
8
9
.218
(5.54)
1.687 MAX. THREAD, .21” (6.4mm) minimum depth.
.109 MAX.
(2.77)
A
B
(42.85)
.31
(7.9)
1.39 MAX.*
.065
(1.65)
(35.3)
*Dimensions with .210” (6.31mm) terminals.
.150
TAB WIDTH
(3.81)
.437
(11.10)
1.29 MAX.**
(32.8)
1.25 MAX.***
(31.8)
#6-32
THREAD
** Dimensions with .±±0” (2.79mm) or .201”(1.2±mm) terminals.
*** Dimensions with .±87” (4.71mm) terminals.
KUMP plain case
KUMP core / stud mount case
.288
(7.32)
.187 (4.75) DIA.
PUSH-TO-TEST BUTTON
AVAILABLE
1.968 MAX.†
(49.99)
1.906 MAX.‡
(48.41)
X
1.531 MAX.
(38.89)
1.43 MAX.
(36.27)
.219 MAX.
(5.56)
.130
1.968 MAX.†
(49.99)
1.906 MAX.‡
(48.41)
(3.30)
1
4
2
5
3
6
1. 74 MAX.
(44.2)
1.406 MAX.
(35.71)
7
8
9
X
STUD with
A
B
#6-32THREAD
or CORE TAPPED
#6-32
.312
(7.92)
1.39 MAX.*
(35.3)
X
1.29 MAX.**
(32.8)
.437 .010
(11.10 .25)
X
X
1.25 MAX.***
(31.8)
X Is For Terminal Dimensions.
See Teminal Drawings.
KUMP top flange case
1.518 MAX.
(38.56)
.078TYP.
(1.98)
† Dimensions with .210” (6.31mm) terminals.
‡ Dimensions with .±87” (4.71mm and .201” 1.2±mm) terminals.
1
4
2
5
3
6
1.713 .003
(43.51 .08)
7
8
9
1.373 .010
(34.87 .25)
1.989 .003
(50.52)
*Dimensions with .210” (6.31mm) terminals.
** Dimensions with .±±0” (2.79mm) or .201”(1.2±mm) terminals.
*** Dimensions with .±87” (4.71mm) terminals.
A
B
2.248 MAX.
(57.10)
.178TYP.
(4.52)
KUMP bracket mount case
KUMP stud on end case
.312
1.968 MAX. †
2.90 MAX.
.078 R.TYP.
(1.98)
.625TYP.
(15.88)
PUSH-TO-TEST BUTTON
AVAILABLE
TYP.
.38
(9.7)
(49.99)
(73.7)
(7.92)
X
1.906 MAX. ‡
(48.41)
.085 MAX.
(2.16)
.75
(19.1)
1.531 MAX.
(38.89)
.06
(1.52)
X
1.968 MAX.†
(49.99)
X
.375
(9.53)
.437
#6-32 THREAD
.07
2.500
(63.50)
1.906 MAX.‡
(1.8)
(11.10)
.16
(48.41)
(4.1)
2
03-2015, Rev. 0315
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
General Purpose
Panel/Plug-in Relays
Potter & Brumfield
KUMP Series Panel Plug-in Relay (Continued)
Relay front diagrams
Models with 6.31mm
(.210) QC terminals
Models with all other terminals
1.531 MAX.
(38.89)
1.531 MAX.
(38.89)
1
4
2
5
3
6
1
4
2
5
3
6
1.406 MAX.
(35.71)
1.406 MAX.
(35.71)
7
9
7
8
9
A
B
A
B
Terminal dimensions
4.71mm (.±87) quick connect
1.2±mm (.201) quick connect
±.±9mm (.047) printed circuit
6.31mm (.210) quick connect
.125
.156
.093
.035
.093
.156
(2.36)
(3.18)
(3.96)
(2.36)
(3.96)
(.89)
.125 DIA.
(3.18)
.187 .002
(4.75 .05)
.205± ±±.002
(5.21± ±.05)
.250 .003
(6.35 .08)
HEADER
.180
(4.57)
HEADER
HEADER
HEADER
.250
(6.35)
.078
(1.98)
.035
(.89)
.106
.285
(7.24)
.237
.156
(2.69)
(6.02)
(3.96)
.305
(7.75)
281 REF.
(7.14)
THICKNESS
.312
.047
(1.19)
.316±REF.
(8.03)
THICKNESS
.268 REF.
(6.81)
(7.92)
.020
(.51)
.358 REF.
(9.09)
.032
(.81)
.032
.032
(0.81)
THICKNESS
THICKNESS
(.81)
Terminal assignment
± form Z
± form C
2 form C
3 form C
± form X (delete ± & 3)
± form Y (delete 4 & 6)
± form A (delete 2)
2 form A (delete ± & 3)
2 form B (delete 4 & 6)
3 form A (delete ±, 2 & 3)
3 form B (delete 4, 1 & 6)
± form B (delete 1)
1
4
1
4
7
1
4
7
3
6
2
3
6
9
2
5
8
3
6
9
5
7
A
B
B
B
B
A
A
A
PCB layout
Bottom view on solder pins
± form Z version
(Omit unnecessry holes for
form X and Y types)
3 pole version
(Omit unnecessry holes for
form A and 2 pole types)
.206
.076 DIA. TYP.
(5.23)
.206
.076 DIA. TYP.
(5.23)
(1.93)
(1.93)
.328
(8.33)
.626
.626
(15.90)
(15.90)
.875
(22.23)
.437
(11.10)
.875
(22.23)
3
03-2015, Rev. 0315
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
General Purpose
Panel/Plug-in Relays
Potter & Brumfield
KUMP Series Panel Plug-in Relay (Continued)
Product code structure
Typical product code KUMP -11
A
1
8
-120
Type
KUM ±1A open style relay
KUMP ±1A enclosed relay
Contact arrangement
1
4
7
± form A (± NO)
± form Y (± NC-DB)
2 form A (2 NO)
2
5
8
± form B (± NC)
± form C (± CO)
2 form B (2 NC)
3
6
± form X (± NO-DM)
± form Z (± CO-DB-DM)
11 2 form C (2 CO)
14 3 form C (3 CO)
12 3 form A (3 NO)
Coil Input
13 3 form B (3 NC)
A
AC, 10/60Hz
D
DC
Mounting and options
KUM
1
3
5
#6-32 mounting stud, 1.14mm (.2±8in) locating tab
#6-32 tapped core, 3.±8mm (.±21in) locating tab
#6-32 tapped core, no locating tab
2
4
2-hole bracket, #6-32 tapped
#6-32 tapped core, 1.14mm (.2±8in) locating tab
KUMP
1
2
3
4
Socket mount (plain) case
Socket mount (plain) case with push-to-test button
Socket mount (plain) case with indicator lamp±)
Socket mount (plain) case with indicator lamp and push-to-test button±)
Bracket mount case
5
6
7
8
9
A
B
C
D
E
F
G
H
T
Bracket mount case with push-to-test button
Bracket mount case with indicator lamp±)
Bracket mount case with indicator lamp and push-to-test button±)
Plain case with #6-32 stud and locating tab on end of case
Plain case with #6-32 stud and locating tab
Plain case with #6-32 stud and locating tab, push-to-test button
Plain case with #6-32 stud and locating tab, indicator lamp±)
Plain case with #6-32 stud and locating tab, push-to-test button and indicator lamp±)
Plain case with #6-32 tapped core and locating tab
Plain case with #6-32 tapped core and locating tab, push-to-test button
Plain case with #6-32 tapped core and locating tab, indicator lamp±)
Plain case with #6-32 tapped core and locating tab, push-to-test button and indicator lamp±)
Top flange case
±) Indicator lamps are available on models with the following coils: 6-24VAC and VDC, ±±0VDC and ±20-240VAC.
Only models with ±20-240VAC coils are UL recognized.
Terminal and contact material
6
9
1.2±mm (.201in) quick connect/solder; AgCdO
±.±9mm (.047in) PCB, AgCdO
8
4.71mm (.±87in) quick connect/solder; AgCdO
6.31mm (.210in) quick connect/solder; AgCdO 2)
4.71mm (.±87in) quick connect/solder; AgSnOInO
6.31mm (.210in) quick connect/solder; AgSnOInO
G
T
V
R
U
1.2±mm (.201in) quick connect/solder; AgSnOInO
±.±9mm (.047in) PCB, AgSnOInO
2)
2) 6.31mm (.210in) quick connect/solder terminals are not available on 3 pole relays
Coil voltage
Coil code: please refer to coil versions table
Product Code
Arrangement
Material
AgCdO
Coil
Terminals
4.71mm (.±87in) QC
Mounting
Socket mount, plain case
Part Number
6-±393±±6-3
6-±393±±6-2
6-±393±±6-4
7-±393±±6-±
7-±393±±6-2
7-±393±±6-0
8-±393±±6-1
8-±393±±6-4
9-±393±±6-0
9-±393±±6-±
KUMP-±±A±8-24
KUMP-±±A±8-±20
KUMP-±±A±8-240
KUMP-±±D±8-±2
KUMP-±±D±8-24
KUMP-±±D±8-±±0
KUMP-±4A±8-24
KUMP-±4A±8-±20
KUMP-±4D±8-±2
KUMP-±4D±8-24
2 form C; 2 CO
24 VAC
±20 VAC
240 VAC
±2 VDC
24 VDC
±±0 VDC
24 VAC
±20 VAC
±2 VDC
24 VDC
3 form C, 3 CO
4
03-2015, Rev. 0315
www.te.com
© 2015 Tyco Electronics Corporation,
a TE Connectivity Ltd. company.
Catalog and product specification according
to IEC 61810-1 and to be used only together
with the ‘Definitions’ section.
Catalog and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Catalog product data, ‘Definitions’ section,
application notes and all specifications are
subject to change.
相关型号：
©2020 ICPDF网 联系我们和版权申明