29306-BRF-001-A [TE]
6-Port DS3/E3/STS-1 Integrated Line Termination;
| 型号： | 29306-BRF-001-A |
| 厂家： | 
TE CONNECTIVITY |
| 描述： | 6-Port DS3/E3/STS-1 Integrated Line Termination |
| 文件： | 总2页 (文件大小：511K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
6-Port DS3/E3/STS-1 Integrated Line Termination
Device for ATM, Packet Processing and TDM Transport
M29306–DS3/E3/STS-1 “Line-Card-on-a-Chip”
The M29306 provides the most complete physical-layer
>
KEY FEATURES
solution for flexible DS3/E3/STS-1 ATM, packet and TDM
services on a single chip. The M29306 aggressively drives
down cost for existing solutions and as well as reduces
PCB real-estate and power.
> High integration – LIUs
with DJAT, T3/E3, STS-1
framers/mappers,
STS-12/STM-4 framer,
ATM & HDLC processors
> ATM/packet interfaces
– SPI-3, 8-bit 25–104 MHz
– UTOPIA Level 2/POS-PHY
Level 2, 16-bit 25-50 MHz
> Flexibility – mix ATM, TDM and > Fractional T3/E3 support
Each port of the M29306 operates independently allowing
for a mix of different rates and protocols. This flexibility
allows service providers to provide a combination of clear
channel DS3/E3 for packet, DS3/E3 ATM UNI or T3/E3/STS-1
TDM services on the same card. This enables ADMs/OEDs
and MSPPs to deploy a single line card that supports the
simultaneous mapping for SDH or SONET transport of both
DS3 and E3.
packet as well as T3, E3 and
> T3/E3/STS-1 payload
STS-1 services on one device
access
> Easy implementation –TAP
> Embedded CLADs for
software + high integration
supported line rates
= faster time-to-market
> Pattern generator/detector
> Parallel 8-bit, 77.76 MHz TDM
for BERT
telecom bus
> Comprehensive loopbacks
The M29306 integrates all the functional physical-layer
blocks for a DS3/E3/STS-1 line card. It includes: 6 inde-
pendent electrical line interface units (LIUs) with built-in
digital jitter attenuators (DJAT), 12 DS3/E3 framers, and 6
STS-1 framers. Each port is supported by a number of
protocol options that may be selected on a per port basis
from high level data link controllers (HDLC), ATM cell
delineators, or DS3/E3 SONET/SDH mappers/demappers.
The only requirement on the line side is the addition of
transformers and passive termination.
The M29306 requires only one 19.44 MHz reference clock
(passive crystal) for generating all the necessary internal
line rate clocks and enabling the same reference clock to
be available on an output pad. In addition it can use a 77.76
MHz or 155.52 MHz reference.
Fractional DS3/E3 service is also supported through a
bypass mode that allows external access to the DS3/E3
channel’s data stream between the framer and the
ATM/HDLC control allowing for external processing of
the payload. This bypass mode also provides the capability
of chaining two M29306s together to support a 12 line to
one system side implementation. A STS-1 bypass on each
of the STS-1 framers also allows for external access to
the STS-1 payload.
The device incorporates flexible system interfaces to
support cell/packet termination into an industry-standard
system bus of UTOPIA Level 2 (UL2) for ATM, POS-PHY Level
2 or SPI-3 for HDLC packets, and STS-12/STM-4 support
for the SONET/SDH traffic via a standard 8-bit, 77 MHz TDM
telecom bus. Thus, a channelized OC-12/STM-4 can be broken
down to DS3/E3 streams by the M29306 on a channel-by-
channel basis.
>
For maintenance, the M29306 supports pseudo-random bit
sequence (PRBS) testing and a full set of loopback functions
are provided at different functional blocks.
Using the telecom application package (TAP) software to abstract
the physical registers, developers can easily implement the M29306
solution, reducing design time.
T3/E3
Overhead
Access
Bypass/Chaining I/F
M29306
UTOPIA L2
or
12x
ATM
Processors
Cell or
Packet
16-bit 50
MHz
POS-PHY
L2
12x
T3/E3
Framers
12x
Cell or
Packet
(POS-SPI-3
PHY Interface)
8-bit104
MHz
HDLC
Processors
6x
T3/E3
or
STS-1E
6
Lines
T3/E3/
STS-1E
(EC-1)
Lines
LIU + JAT
6x T3/E3 to
STS-1E
Mapper/
Demapper
OC-12
Mux/Demux/
Mini-framer
6x
8-big77.75 MHz
Telecom Bus
STS-1
Framers
6x
PRBS
Generator
and Monitor
Microprocessor Interface
MPC860
JTAG
Test I/F
Systems Control
STS-1 Overhead Access
STS-12 Overhead Access
M29306 Functional Block Diagram
Product Features
• 6 DS3/E3/STS-1E LIUs with jitter
attenuation/desynchronization
• 6 DS3/E3 mappers/demappers
supporting T3/VC-3/AU-3; T3/TUG-
3/AU-4; E3/VC-3/AU-3; E3/TUG-
3/AU-4
• Fractional T3/E3 interface for
external FPGA or ASIC
Applications
• SONET/SDH ADM/OED
–Adaptive receive equalizer enables
> 1800 ft of cable reach
• Synchronous 16-bit microprocessor
interface bus at 30–77 MHz bus rate
• MSPP
• NGDLC/BLC
• Optical ADM
• PON OLT
• 6 STS-1 SONET/SDH framers
support transport overhead access;
includes monitor and generator
– Programmable transmit pulse
mask configuration
– Glueless connection to Motorola
MPC860
– Dynamic loop bandwidth to comply
with all standard intrinsic and
output jitter requirements
• Local (source) and remote (line)
loopback capability at various
internal points in the device
• STS-12/STM-4 SONET/SDH TDM
supporting mapping/demapping of
STS-1E or TUG-3 into/from
STS-12/STM-4 frame
• DCS
• Media Gateway
• 12 T3/E3 framers support T3-M13,
T3-M23, T3 C-bit parity
E3-G.751, E3-G.832
• PRBS detector and generator
supporting framed and unframed
modes
Ordering Information
• M29306-12P
• Pointer processing
• Transport overhead insertion
and extraction
• 12 ATM processors support both
direct (for C-Bit parity/M13/M23 T3
and G.832 E3) and PLCP-based
mapping (for C-Bit parity
• JTAG (IEEE 1149.1) boundary scan
• Single rail 1.8 V core supply with
3.3 V LvTTL I/O, 1.8V LVDS I/O
• Parallel 77.76 MHz x 8-bit
telecom bus interface
• Embedded CLADs internally
generating the T3, E3, STS-1 clocks
DS3/M13/M23 and E3-G.751)
• ATM/packet interfaces
• 12 bit-synchronous HDLC processors
– SPI-3 8-bit 25–104 MHz for HDLC
packets
• -40C to +85C operation
– UTOPIA Level 2/POS-PHY Level 2,
16-bit 25–50 MHz ATM cells or
HDLC packets
™
www.mindspeed.com/salesoffices
General Information:
© 2004 Mindspeed Technologies . All rights reserved. Mindspeed and the Mindspeed
logo are trademarks of Mindspeed Technologies. All other trademarks are the property
of their respective owners. Although Mindspeed Technologies strives for accuracy in all
its publications, this material may contain errors or omissions and is subject to change
without notice. This material is provided as is and without any express or implied
warranties, including merchantability, fitness for a particular purpose and non-
infringement. Mindspeed Technologies shall not be liable for any special, indirect, inci-
dental or consequential damages as a result of its use.
Headquarters – Newport Beach
4000 MacArthur Blvd., East Tower
Newport Beach, CA 92660-3007
29306-BRF-001-A M04-0920
相关型号：
©2020 ICPDF网 联系我们和版权申明