2098-0275-54 [TE]
Mini Torque Wrenches;型号: | 2098-0275-54 |
厂家: | TE CONNECTIVITY |
描述: | Mini Torque Wrenches |
文件: | 总2页 (文件大小:259K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Instruction Sheet
408-8640
Mini Torque Wrenches
13 AUG 15 Rev C
Open-End Head
Type A Wrench
Protective
Cover
Torque
Wrench
Screw
Partially Closed
Socket Head
Type B Wrench
Extension Arm
114 mm [5.5 in.]
CURRENT
PART NUMBER
PREVIOUS
PART NUMBER
DESCRIPTION
HEAD SIZE (mm [in.])
PESET TORQUE
1055258-1
1055516-1
1055850-1
1055787-1
1055789-1
1055853-1
1055267-1
2119704-1
2098-0275-54
2098-5642-54
2598-5235-54
2598-5014-54
2598-5024-54
2098-5243-54
2098-0299-54
N/A
Type A for SMA Connectors
Type B for SMA Connectors
Type A for SMC Connectors
Type A for SSMA/OSSM* Connectors
Type A for SSMA/OSSM Connectors
Type A for SMB/SMC Connectors
Type A Kit (Includes 2 Heads)
Type B for OSMM Connectors
Figure 1
7.9 [5/16]
7.9 [5/16]
8 in.-lbs
8 in.-lbs
5.9 [15/64]
2.6 in.-lbs
5 in.-lbs
6.4 [1/4]
4.7 [3/16]
3 in.-lbs
5.6 [7/32]
8 in.-lbs
6.4 [1/4] and 7.9 [5/16]
4.8 [3/16]
8 in.-lbs
3 in.-lbs +1.0/-0.5
1. INTRODUCTION
The mini torque wrenches listed in Figure 1 are used to properly install or disassemble the described
connectors.
Figure 1 also lists the previous part numbers of the wrenches, description and size, and preset torque for each
wrench.
NOTE
All numerical values in this instruction sheet are in U.S. customary units. Dimensions are in metric units [with U.S. customary
units in brackets]. Figures and illustrations are for reference only and are not drawn to scale.
Reasons for reissue of this instruction sheet are provided in Section 5, REVISION SUMMARY.
2. DESCRIPTION
Each mini torque wrench consists of a protective cover, torque wrench, and a “fillister head” screw (which
permits replacement or change of various wrench heads).
Type A wrench is equipped with an open-end head, and Type B wrench is equipped with a partially- closed
socket head and extension arm. Refer to Figure 2 for head and extension arm replacement part numbers.
The wrenches are designed to be used in the clockwise or counterclockwise direction.
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com.
© 2015 TE Connectivity family of companies
All Rights Reserved
*Trademark
PRODUCT INFORMATION 1-800-522-6752
1 of 2
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.
408-8640
REPLACEMENT
1055265-1
1055264-1
1403926-1
1406702-1
1055784-1
1055786-1
2119705-1
DESCRIPTION (mm [in.])
7.9 [5/16] Type A Open-End Head
6.4 [1/4] Type A Open-End Head
5.9 [15/64] Type A Open-End Head
4.7 [3/16] Type A Open-End Head
7.9 [5/16] Type B Socket Head
Type B Extension Arm
4.8 [3/16] Type B Socket Head
Figure 2
3. OPERATION
NOTE
If a wrench has not been used recently, move the head back and forth several times, listening for audible “clicks”. Moving the
head back and forth spreads lubricant throughout the internal mechanism to improve wrench performance.
Using the appropriate-sized head (refer to Figure 1), and turn the wrench clockwise or counterclockwise until
there is an audible “click”. This “click” indicates that the torque has been achieved.
CAUTION
DO NOT over-tighten the connector with the wrench. Over-tightening could result in inaccurate torque settings.
4. REPLACEMENT (Refer To Figure 3)
Type “A” heads are interchangeable. Remove the screw securing the head to the wrench. Remove the head.
Then install the appropriate head listed in Figure 2.
Type “B” heads are replaceable. Remove the screw securing the head and extension arm to the wrench.
Remove the head and extension arm. Break the press fit between the head and extension arm. Replace the
components in the reverse order of removal. See Figure 2 for replacement parts.
Order replacement parts through your TE Representative, or call 1-800-522-6752, or send a facsimile of your
purchase order to 717-986-7605, or write to:
CUSTOMER SERVICE (38-35)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG, PA 17105-3608
5. REVISION SUMMARY
Added new part number and related information to tables in Figures 1 and 2
Open-End Head
Screw
Screw
Partially Closed
Socket Head
Extension Arm
Figure 3
2 of 2
Rev C
相关型号:
©2020 ICPDF网 联系我们和版权申明