1012X [TE]

WILMAR™ Protective Relays - 1000 Series; 丰益™保护继电器 - 1000系列


型号：	1012X
厂家：	TE CONNECTIVITY
描述：	WILMAR™ Protective Relays - 1000 Series 丰益™保护继电器 - 1000系列继电器
文件：	总1页 (文件大小：40K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Phase Failure Relays

WILMAR™ Protective Relays – 1000 Series

Function:

• ANSI/IEEE C37.90-1978

• UL file No. E58048

• CSA file No. LR61158

TERMINAL STRIPS

#6 - 32 SCREWS

Phase failure relays protect motors, equipment and

personnel from damage or injury caused by open

phase, reversed phase sequence, or low voltage in a

three phase system. Models are available for 50 and

60 Hz with voltages up to 575 volts. Motor control

switchboards are a common application.

Operation:

The contacts of the relay will close only when it

senses normal conditions of three phase power at

the proper phase sequence.

/16

The relay contacts will remain in their normally open

position (de-energized) when voltage with incorrect

phase sequence is applied, one or more phases are

open, or at undervoltage condition.

/64" DIA.

4 MTG. HOLES

PART NUMBER SELECTION

Note: Dimensions in inches. Multiply values by 25.4 for dimensions in mm.

PART NUMBER SELECTION

Sample Part No.

1004X

Type:

1001 = 120 V, 60 Hz, 3 phase,L-L

1007 = 208 V, 60 Hz, 3 phase, L-L

1002 = 230 V, 60 Hz, 3 phase,L-L

1012 = 300 V, 60 Hz, 3 phase, L-L

1013 = 350 V, 60 Hz, 3 phase, L-L

1003 = 380 V, 50 Hz, 3 phase, L-L

1004 = 460 V, 60 Hz, 3 phase,L-L

1005 = 525 V, 60 Hz, 3 phase,L-L

1006 = 575 V, 60 Hz, 3 Phase, L-L

Mounting:

PRODUCT SPECIFICATIONS

Part Number

1000 Series

Nominal Voltage .............................

Voltage Drop-Out ...........................

Pick-Up to Drop-Out Differential ....

Ambient Operating Temperature ....

Temperature Drift ...........................

Time Delay .....................................

Output Contacts .............................

Contact Ratings ..............................

See Table

75% to 100% of nominal, screwdriver adjustable

3% approx.

-40^oC to +70^oC

X = Flange

± 1%

Blank - Stud

See Curve

Consult factory for additional models and options

One set, normally open

10 amp at 28 VDC resistive

10 amp at 230 VAC resistive

Notes:

Remove screw for access to the undervoltage

adjustment.

2. Clockwise rotation of the adjustment

potentiometer will raise the drop-out voltage.

Tyco Electronics / www.tycoelectronics.com / Factory Direct Technical Support: 800-253-4560, ext. 2023 (U.S., Canada, Mexico) or 805-220-2020, ext. 2023 (International)