02560407-000 [TE]
Small size and low mass core;![02560407-000](http://pdffile.icpdf.com/pdf2/p00326/img/icpdf/02560405-000_2002667_icpdf.jpg)
型号: | 02560407-000 |
厂家: | ![]() |
描述: | Small size and low mass core 输出元件 传感器 换能器 |
文件: | 总5页 (文件大小:159K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
![](http://public.icpdf.com/style/img/ads.jpg)
MHR SERIES
Miniature General Purpose AC LVDT
SPECIFICATIONS
Small size and low mass core
High output signal
Stroke ranges from 0.005 to 2 inches
AC operation from 2kHz to 20kHz
Stainless steel housing
Imperial or metric threaded core
The legendary MHR Series LVDTs provide precision
measurements in space restrictive applications. With a
diameter of just 3/8 inch [9.5mm], and an extremely
lightweight core, the MHR Series is ideal for applications
where excessive core weight could influence the motion;
with less inertia, accurate measurements at higher
displacement speeds are easier to achieve. The
lightweight core also reduces mechanical stresses and
helps preserve the structural integrity of the core
actuation assembly.
FEATURES
Compact size
Lightweight core
The high output sensitivity resulting from the close
electrical coupling between the coil and core provides
ample signal for interfacing with practically all signal
conditioners and conditioning circuits. The magnetic
stainless steel housing provides electromagnetic and
electrostatic shielding.
0.25% linearity (100% stroke)
Shock and vibration tolerant
Stainless steel case
Calibration certificate supplied with
each unit
The high temperature operation (200oC) model, MHR-T
is available for stroke ranges of 0.025 to 1 inch. A High
pressure (vented case) model, MHR-V is also available.
The MHR is compatible with the full line of Measurement
Specialties LVDT signal conditioners.
APPLICATIONS
X, Y, Z stage position feedback
Wire-die bonding machines
Cylinder position feedback
Voice coil testing
Like in most of our LVDTs, the MHR windings are vacuum
Materials testing machines
Space restricted installations
impregnated with
a
specially formulated, high
temperature, flexible resin, and the coil assembly is
potted inside its housing with a two-component epoxy.
This provides excellent protection against hostile
environments such as high humidity, vibration and shock.
SENSOR SOLUTIONS /// MHR Series Rev. 8
5/2016
Page 1
MHR SERIES
Miniature General Purpose AC LVDT
PERFORMANCE SPECIFICATIONS
ELECTRICAL SPECIFICATIONS (common)
Input voltage
3 VRMS sine wave
Input frequency
Test frequency
2kHz to 20kHz
2.5kHz (standard)
ELECTRICAL SPECIFICATIONS @ 10kHz (recommended operation)
MHR 005
Parameter
MHR 010 MHR 025 MHR 050 MHR 100 MHR 250 MHR 500 MHR 1000 MHR 2000
0.005
[ 0.13]
8.70
0.010
[ 0.25]
6.05
0.025
[ 0.64]
8.10
0.05
[ 1.27]
3.15
0.10
[ 2.54]
2.80
0.25
[ 6.35]
2.07
0.5
[ 12.7]
1.96
1
2
Stroke range
[ 25.4]
0.77
[ 50.8]
0.49
Sensitivity
V/V/inch
[mV/V/mm]
[343]
[238]
[319]
[124]
[110]
[81.5]
[77.2]
[30.3]
[19.3]
Output at stroke ends
mV/V (*)
Phase shift
Input impedance
(PRIMARY)
43.5
+38°
84Ω
60.5
+20°
165Ω
202.5
+21°
157.5
+8°
280
+5°
517.5
+7°
980
+7°
770
-1°
980
-15°
238Ω
419Ω
400Ω
345Ω
264Ω
155Ω
504Ω
Output impedance
(SECONDARY)
302Ω
300Ω
485Ω
154Ω
200Ω
420Ω
810Ω
450Ω
1780Ω
Non-linearity
@ 50% stroke
@100% stroke (max)
@125% stroke
@150% stroke
Null voltage (max.)
% of FR
0.15
0.25
0.25
0.30
0.20
0.25
0.30
0.40
0.10
0.25
0.35
0.35
0.15
0.25
0.25
0.30
0.15
0.25
0.35
0.50
0.15
0.25
0.35
0.15
0.25
0 .30 (**)
0.75 (**)
0.20
0.25
0 .50
/
/
0.50
/
/
0.50 (**)
0.5% of FRO
2.5% FRO 1.0% FRO
ELECTRICAL SPECIFICATIONS @ 2.5kHz (standard calibration)
Parameter
MHR 005
MHR 010 MHR 025 MHR 050 MHR 100 MHR 250 MHR 500 MHR 1000 MHR 2000
0.005
0.010
0.025
0.05
0.10
0.25
0.5
1
2
Stroke range
[ 0.13]
[ 0.25]
[ 0.64]
[ 1.27]
[ 2.54]
[ 6.35]
[ 12.7]
[ 25.4]
[ 50.8]
Sensitivity
V/V/in
3.19
3.36
4.36
2.55
2.40
[94]
1.73
[68]
1.60
[63]
0.70
[27]
0.47
[19]
[mV/V/mm]
[126]
[132]
[172]
[100]
Output at stroke ends,
mV/V (*)
16
33.6
+59°
78Ω
109
+58°
116Ω
127.5
+36°
240
+30°
135Ω
432.5
+33°
800
+23°
145Ω
700
+6°
940
+3°
Phase shift
+73°
59Ω
Input impedance
(PRIMARY)
141Ω
147Ω
100Ω
304Ω
Output impedance
(SECONDARY)
260Ω
192Ω
286Ω
90Ω
125Ω
268Ω
445Ω
370Ω
13620Ω
Non-linearity
% of FR
0.15
@ 50% stroke
0.20
0.25
0.30
0.40
0.10
0.25
0.35
0.35
0.15
0.25
0.25
0.30
0.15
0.25
0.35
0.50
0.15
0.25
0.15
0.25
0.20
0.25
0 .50
/
/
@100% stroke (max)
@125% stroke
@150% stroke
Null voltage (max)
0.25
0.25
0.25
0.35
0.30 (**)
0.75 (**)
/
/
0.30
0.50 (**)
0.5% of FRO
3% FRO 1.5% FRO
(*) Unit for output at stroke ends is millivolt per volt of input voltage
(**) Requires special reduced core length
SENSOR SOLUTIONS /// MHR Series Rev. 8
5/2016
Page 2
MHR SERIES
Miniature General Purpose AC LVDT
ENVIRONMENTAL SPECIFICATIONS & MATERIALS
Operating temperature
Shock survival
-65°F to +300°F [-55°C to 150°C]
1,000 g (11ms half-sine)
Vibration tolerance
Housing material
Electrical connection
IEC 60529 rating
20 g up to 2KHz
AISI 400 Series stainless steel
Six lead-wires, 32 AWG stranded Copper, PTFE insulated, 1 foot [0.3m] long (longer wires optional)
IP61
Notes:
All values are nominal unless otherwise noted
Electrical specifications are for the test frequency indicated in the table
Dimensions are in inch [mm] unless otherwise noted
FR: Full Range is the stroke range, end to end; FR=2xS for S stroke range
FRO (Full Range Output): Algebraic difference in outputs measured at the ends of the range
MECHANICAL SPECIFICATIONS
Parameter
MHR 005
MHR 010
MHR 025
MHR 050
MHR 100
MHR 250
MHR 500 MHR 1000 MHR 2000
0.535
[13.6]
0.660
[16.8]
0.815
[20.7]
0.990
[25.1]
1.850
[47.0]
3.300
5.600
8.000
0.375
[9.5]
Body length “A”
[83.82]
[142.2]
[203.2]
0.180
[4.6]
0.233
[5.9]
0.400
[10.2]
0.500
[12.7]
0.625
[15.9]
1.125
[28.6]
2.000
[50.8]
3.000
[76.2]
3.00
Core length “B”
[76.2]
Body weight oz
[g]
0.07
[2]
0.11
[3]
0.18
[5]
0.21
[6]
0.21
[6]
0.32
[9]
0.60
[17]
0.92
[26]
1.4
[40]
Core weight oz
[g]
0.004
[0.1]
0.007
[0.2]
0.016
[0.5]
0.016
[0.5]
0.025
[0.7]
0.032
[0.9]
0.056
[1.6]
0.088
[2.5]
0.088
[2.5]
Dimensions are in inch [mm]
SENSOR SOLUTIONS /// MHR Series Rev. 8
5/2016
Page 3
MHR SERIES
Miniature General Purpose AC LVDT
WIRING INFORMATION
Connect Blue to Green for differential output
ORDERING INFORMATION
Description
Model
Part Number
02560405-000
02560406-000
02560407-000
02560408-000
02560409-000
Description
0.25 inch LVDT
0.5 inch LVDT
1 inch LVDT
2 inch LVDT
Model
Part Number
02560410-000
02560411-000
02560412-000
02561033-000
0.005 inch LVDT
0.010 inch LVDT
0.025 inch LVDT
0.05 inch LVDT
0.10 inch LVDT
MHR 005
MHR 010
MHR 025
MHR 050
MHR 100
MHR 250
MHR 500
MHR 1000
MHR 2000
OPTIONS
XXXXXXXX-002
XXXXXXXX-003
XXXXXXXX-006
XXXXXXXX-040
5.0 kHz calibration
10 kHz calibration
Metric threaded core
10 foot long lead-wires
Consult factory
Note: Add multiple option dash numbers together to determine proper ordering suffix
Example: MHR 1000, 1 inch, with 5 kHz calibration and metric threaded core, P/N 02560412-008
ACCESSORIES
05282945-006
05282945-012
05282945-024
05282945-036
05282976-006
05282976-012
04560954-000
Core connecting rod, 6 inches long, 1-72 threads
Core connecting rod, 12 inches long, 1-72 threads
Core connecting rod, 24 inches long, 1-72 threads
Core connecting rod, 36 inches long, 1-72 threads
Core connecting rod, 6 inches long, M2x0.4 metric threads
Core connecting rod, 12 inches long, M2x0.4 metric threads
Mounting block
SENSOR SOLUTIONS /// MHR Series Rev. 8
5/2016
Page 4
MHR SERIES
Miniature General Purpose AC LVDT
NORTH AMERICA
EUROPE
ASIA
Measurement Specialties, Inc.,
a TE Connectivity Company
1000 Lucas Way
MEAS Deutschland GmbH (Europe)
a TE Connectivity Company
Hauert 13
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Hampton, VA 23666
United States
Phone: +1-800-745-8008
Fax: +1-757-766-4297
Email: customercare.hmpt@te.com
D-44227 Dortmund
Germany
Phone: +49-(0)231-9740-0
Fax: +49-(0)231-9740-20
Email: customercare.dtmd@te.com
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Phone: +86-755-33305088
Fax: +86-755-33305099
Email: customercare.shzn@te.com
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Accustar, American Sensor Technologies, AST, ATEXIS, DEUTSCH, IdentiCal, TruBlue, KPSI, Krystal Bond, Microfused, UltraStable, Measurement Specialties, MEAS, Schaevitz, TE
Connectivity, TE, and the TE connectivity (logo) are trademarks of the TE Connectivity Ltd. family of companies. Other logos, product and company names mentioned herein may be
trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
SENSOR SOLUTIONS /// MHR Series Rev. 8
5/2016
Page 5
相关型号:
©2020 ICPDF网 联系我们和版权申明