PK-ZS-007R [TELEDYNE]
MICRO GRABBER PAIR 4/PC;型号: | PK-ZS-007R |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | MICRO GRABBER PAIR 4/PC PC |
文件: | 总4页 (文件大小:1149K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ZS Series High Impedance Active Probes
1 GHz - 4 GHz Probes
Key Features
High signal fidelity to 4 GHz
bandwidth
•
The ZS Series probes are high impedance, low capacitance active
Low circuit loading – High input
impedance and low capacitance
•
•
probes that maintain high signal fidelity through 4 GHz. A small form
factor and a wide variety of accessories ensures the ZS probe meets
every difficult probing challenge.
4 GHz, 2.5 GHz, 1.5 GHz and
1 GHz models
1 M Ω input resistance
•
•
High Impedance Reduces
Circuit Loading across Full
Oscilloscope Bandwidth
A Variety of Probe Tips for
Varied Tasks
0.6 pF (4 GHz) and 0.9 pF input
capacitance
The small form factor and extensive
range of standard probe tips ensures
that this probe can meet any difficult
probing challenge. Various flexible
leads and clips, such as right-angle
leads, Y-adapters, and micro-grabbers,
are also available for probing test
points that are spaced farther apart.
± 8 V input dynamic range,
± 12 V offset range
Engineers must commonly probe
high frequency signals with high
signal fidelity. Typical passive probes
with high input R and C provide good
response at lower frequencies but
inappropriately load the circuit and
distort signals at higher frequencies.
The ZS Series features both high
input R (1 MΩ) and low input C (0.6 pF
and 0.9 pF) to reduce circuit Loading
across the entire probe/oscilloscope
bandwidth. The ZS1000 is ideal
for 200–600 MHz oscilloscopes.
The ZS1500 is ideal for 1 GHz
•
Wide variety of tips and grounds
•
•
Easy to use, integrated with
oscilloscope
Innovative Grounding Provides
the Highest Signal Fidelity
Keeping the ground loop short is
critical to eliminating the effect of
high inductance on the signal. The
ZS probes provide a wide variety of
unique and innovative accessories
which maintain the highest signal
fidelity. They eliminate the effects of
the loop on the circuit.
oscilloscopes, the ZS2500 is ideal
for 2 GHz oscilloscopes, and the
ZS4000 is ideal for 2.5 GHz and
4 GHz oscilloscopes.
EXTENSIVE SET OF PROBE TIPS AND GROUND LEADS
Use the Solder-In Ground with Straight Tip for general
purpose browsing.
The Straight Tip and Offset Ground Lead can be used
together for probing signal and ground points extremely
close together.
Hard-to-reach spaces can be be probed with the Bent Sharp
Tip and can be used with a range of ground leads like the
flexible Short Right-Angle Lead shown here.
Probe directly on surface mount components, like resistors
or capacitors, with the Discrete SMD Tip. Use this tip with any
of the ground leads, like the flexible Long Right-Angle Lead
shown here.
The 2.54 mm probe adapter provides full BW probing and holds
the probe in place.
The Ground Blade and Copper Pad provide the shortest
ground loop for excellent signal fidelity when probing an IC.
Use them with the insulated IC Lead Tip to prevent shorting
between test points.
2
ZS PROBE ACCESSORIES
PK-ZS-010
Channel ID
Colored Clips
ZS4000
PK-ZS-019
Freehand Probe Holder
PACC-PT005
Bent Tip
PACC-PT003
IC Tip
PK-ZS-001
Probe Tip - Standard
PK-ZS-017
Pogo Tip
PK-ZS-006
Right Angle Socket
PK-ZS-023
Straight Pin
Lead - 13cm
PK-ZS-014
Y-Lead
Adapter
PK-ZS-022
Straight Pin
Lead - 7cm
PACC-LD003
Right Angle
Pin Lead - 5cm
PACC-LD004
Right Angle
Pin Lead - 10cm
PK-ZS-018
2.54 mm Square
Pin Adapter
PK-ZS-020
Pogo Ground Lead
PK-ZS-016
Offset Ground
(Z Lead)
PK-ZS-009
Copper Tape
PK-ZS-015
Ground Blade - Wide
PK-ZS-021
Ground Blade -
Narrow
PK-ZS-024
2.54 mm PCB
Adapter
PK-ZS-007R
Microclip Sprung
Hook, Red
PK-ZF-025
QFPIC Clip Yellow -
Short
PK-ZF-025
QFPIC Clip Green -
Short
PK-ZS-007B
Microclip Sprung
Hook, Black
PK-ZS-010
Channel ID
Colored Clips
ZS1000
ZS1500
ZS2500
PACC-MS005
Freehand Probe Holderk
PACC-PT005
Bent Tip
PACC-PT003
IC Tip
PK-ZS-001
Probe Tip - Standard
Qty: 3
PK-ZS-013
Pogo Tip
PK-ZS-006
Right Angle Socket
PK-ZS-012
2.54 mm Square Pin
Adapter
PK-ZS-004
Single Lead -
Long
PK-ZS-005
Y-Lead
Adapter
PK-ZS-003
Single Lead -
Short
PACC-LD003
Right Angle
Pin Lead - 5cm
PACC-LD004
Right Angle
Lead - Long
PACC-CD008
Pogo Ground Lead
PK-ZS-002
Offset Ground
PK-ZS-009
Copper Tape
PK-ZS-011
Ground Blade - Wide
PK-ZS-008
Ground Blade - Narrow
PK-ZS-007R
Microclip Sprung
Hook, Red
PK-ZS-007B
Microclip Sprung
Hook, Black
3
SPECIFICATIONS AND ORDERING INFORMATION
ZS1000
ZS1500
ZS2500
ZS4000
Specifications
Electrical Characteristics
Probe Bandwidth
Input Capacitance
DC Input Resistance
Probe Offset Range
Attenuation
1 GHz
1.5 GHz
0.9 pF
2.5 GHz
4 GHz
0.6 pF
1 MΩ
N/A
±12 V
÷10
±8 V
20 V
Input Dynamic Range
Non-destruct Voltage
General Characteristics
Cable Length
1.3 m
Ordering Information
Product Description
Product Code
Standard Accessory/Quantity
ZS1000
4 GHz, 0.6 pF, 1 MΩ
ZS4000
Replacement ZS1500
High Impedance Active Probe
Accessory Description
Part Number
ZS2500 ZS4000
2.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
1.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
1 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probe
Set of 4 ZS2500, 2.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probes
Set of 4 ZS1500, 1.5 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probes
Set of 4 ZS1000, 1 GHz, 0.9 pF, 1 MΩ
High Impedance Active Probes
ZS2500
ZS1500
ZS1000
2.54 mm PCB Adaptor
2.54mm Square Pin Adapter
2.54mm Square Pin Adaptor
IC Tip
Bent Tip
Channel ID Clips (Set of 4 colors)
Copper Tape Pad
Freehand Probe Holder
Freehand Probe Holder
Ground Blade – Narrow
Ground Blade – Wide
Ground Blade, Narrow
Ground Blade, Wide
Micro-Grabber Pair
PK-ZS-024
PK-ZS-012
PK-ZS-018
PACC-PT003
PACC-PT005
PK-ZS-010
PK-ZS-009
PK-ZS-019
PACC-MS005
PK-ZS-008
PK-ZS-011
PK-ZS-021
PK-ZS-015
5
1
1
1
1
1
2
1
1
1
4
2
ZS2500-QUADPAK
ZS1500-QUADPAK
ZS1000-QUADPAK
1
1
1
1
2
2
Customer Service
PK-ZS-007R and
PK-ZS-007B
1
Teledyne LeCroy oscilloscopes and probes are designed,
built, and tested to ensure high reliability. In the unlikely event
you experience difficulties, our digital oscilloscopes are fully
warranted for three years and our probes are warranted
for one year.
Offset Ground
PK-ZS-016
PK-ZS-002
PK-ZS-020
PACC-CD008
PK-ZS-017
PK-ZS-013
PK-ZS-001
PK-ZS-025
PACC-LD004
PACC-LD003
PK-ZS-006
PK-ZS-023
PK-ZS-004
PK-ZS-022
PK-ZS-003
PK-ZS-005
PK-ZS-014
2
1
3
Offset Ground – Z Lead
Pogo Ground Lead
Pogo Ground Lead
Pogo Tip
1
1
This warranty includes:
No charge for return shipping
Long-term 7-year support
Upgrade to latest software at no charge
•
Pogo Tip
1
3
•
Probe Tip – Standard
QFPIC Clips (set of 2)
Right Angle Lead – Long
Right Angle Lead – Short
Right Angle Socket
Straight Pin Lead – Long
Straight Pin Lead – Long
Straight Pin Lead – Short
Straight Pin Lead – Short
Y Lead Adapter
3
1
1
1
1
1
•
1
1
1
1
1
1
1
1
Y Lead Adaptor
1-800-5-LeCroy
teledynelecroy.com
Local sales offices are located throughout the world.
Visit our website to find the most convenient location.
zsprobes-ds-13nov13
© 2010 by Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change.
without notice. Product or brand names are trademarks or requested trademarks of their respective holders.
相关型号:
©2020 ICPDF网 联系我们和版权申明