DG27-7012-35 [TELEDYNE]
ultra miniature automotive pcb relay;
| 型号： | DG27-7012-35 |
| 厂家： | 
TELEDYNE TECHNOLOGIES INCORPORATED |
| 描述： | ultra miniature automotive pcb relay |
| 文件： | 总2页 (文件大小：355K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DG27
ultra miniature automotive pcb relay
• ultra miniature - only 24.2 x 13.2 x 10.3 mm
• optimised for DC switching up to 30A
• two separate DG20 relays in one package
• Cost effective
• RoHS Compliant
Contacts
Contact number & arrangement
Contact material
2 x SPST-NO (2 x 1 Form A), 2 x SPDT (2 x 1 Form C)
AgSnOInO, AgNi0.15
Max. switching voltage
DC 16V
2 x SPDT
2 x SPST-NO
Normally Open
Normally Closed
25A @ 12VDC
25A
Max continuous current per relay
Max switching current2 (AgSnOInO)
DC
make
break
30A @12VDC
50A
30A @ 12VDC
50A
30A
30A
25A
Min. switching current / voltage
Initial contact resistance
Coil
AgNi0.15: 0.1A, 12VDC / AgSnOInO: 0.5A, 12VDC
≤100mΩ, max. at 0.1A, 6VDC
Rated voltage
DC 6V, 10V, 12V
Must release voltage
Operating range of supply voltage
Rated power consumption
Insulation
≥0.1 (≥0.125 6VDC coil)
See coil table 1
DC 0.55W - see coil table 1
Insulation resistance
100MΩ at 500VDC, 50%RH
Dielectric strength
General Data
coil to contact 500Vrms, 1min
Operating time (typical)
Release time (typical)
Electrical Life3
Mechanical life
Dimensions
ms
3
ms 1.5
ops 1 x 105
ops 1 x 107
L x W x H 24.2 x 13.2 x 10.3mm
8g approx.
Weight
Packing
Plastic tray, 100 relays per tube.
Ambient temperature
storage -40 to 155°C
operating -40 to 105°C
30g, 6ms
Shock resistance
Page 1 of 2
www.aecsensors.com
Sales Department Tel: (888) 847-6552
Ref: DG27 122013JHM
DG27
ultra miniature automotive pcb relay
Coil Data
Table 1
Must operate
voltage max.
(V DC)
Must release
voltage min.
(V DC)
Max allowable
Overdrive *
V DC (23’C)
Nominal Voltage
(V DC)
Coil Resistance (Ω)
±10%
Coil Voltage Code
Standard Coil (0.55W)
(Contact factory for 0.8W coil)
1006
1010
1012
6
64
3.5
5.7
6.9
0.6
12.0
20.0
24.0
10
12
181
254
1.00
1.20
* Above 85°C, maximum allowable voltage should be reduced to 72%
Ordering codes
Contact material
Contact
arrangement
Cover protection
and mounting
Coil code
Type
D
G
2
7
-
7
0
-
3
5
-
Contact material
70
80
-
-
AgSnOInO
AgNi0.15
see coil table 1
Contact arrangement
11
12
-
-
2 x SPDT (2 x 1 C/O, 2 x 1 Form C)
2 x SPST-NO (2 x 1N/O, 2 x 1 Form A)
Cover protection category
2
3
-
-
Flux free
Fully sealed to IP674
Connection mode
for PCB
5
-
Overall Dimensions
Fig. 1
PCB Mounting Dimensions and Wiring
Fig. 2
2 x SPDT
2 x SPST-NO
All Dimensions in mm
Wiring Diagrams (Bottom View)
Mounting Holes (Bottom View)
Notes:
1: All parameters, unless otherwise specified, are measured at ambient temperature of 23ºC.
2: Maximum make current refers to inrush current of lamp load.
3: Electrical life obtained at resistive load at 20A, 13.5VDC on NO contacts, 6 ops/min.
4: For maximum electrical life, please remove the knock off nib of the sealed version.
Specifications are subject to change without notice. E&OE.
Page 2 of 2
Ref: DG27 122013JHM
www.aecsensors.com
Sales Department Tel: (888) 847-6552
相关型号：
©2020 ICPDF网 联系我们和版权申明