4AF-HPN [TELEDYNE]
Controlled with USB or Ethernet;型号: | 4AF-HPN |
厂家: | TELEDYNE TECHNOLOGIES INCORPORATED |
描述: | Controlled with USB or Ethernet |
文件: | 总5页 (文件大小:474K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Miniature Matrix: MMA Series
Controlled with USB or Ethernet
COAX SWITCHES
PART NUMBER DESCRIPTION
The MMA Series is an ideal solution that consists of SPDT, electromechanical coaxial
switches designed to switch a microwave signal from a common input to either of two
outputs. The characteristic impedance is 50 Ohms. The terminated option provides an
impedance match for the unselected port.
The MMA Series is designed to allow the remote operation of 1 to 4 Single Pole Double
Throw switches. Remote operation is accomplished via TCP/IP commands to the
Matrix’s Ethernet interface. Switch control is also accessible via the USB virtual serial
port, using the provided command set. Through these interfaces the Coax Switch can
be switched to the desired position and its position can be read for verification. The
default switch position at power up can be set by the user. The MMA will feature a
graphical user interface (GUI), which will enable user to control switches through
graphical icons and visuals.
ELECTRICAL CHARACTERISTICS (SWITCHES ONLY)
ENVIRONMENTAL AND PHYSICAL CHARACTERISTICS
Form Factor
SPDT,
break before make
Operating Temperature
Standard Actuator Life
Connector Type
–40°C to 65°C
5,000,000 cycles
Frequency Range
Up to DC-40 GHz
50 Ohms, 75 Ohms (SMB only)
15 ms (max.)
SMA, 2.92mm, N, TNC, SMB
Characteristic Impedance
Operate Time
Weight Non-Terminated
1 Switch
2 Switches
18 oz. (510 g) (max.)
20 oz. (567 g) (max.)
23 oz. (652 g) (max.)
Release Time
15 ms (max.)
4 Switches
Actuation Voltage
24Vdc
Weight Terminated
1 Switch
2 Switches
Actuation Current, max. @ ambient
Varies
60 oz. (1701 g) (max.)
62 oz. (1758 g) (max.)
64 oz. (1814 g) (max.)
4 Switches
ADDITIONAL INFORMATION
Interface
INCLUDED ITEMS
• AC/DC Power Adapter
• Power Cord
USB or TCP/IP
Windows, Mac, Linux
Embedded
• USB Cable
Host Operating System
Operating System
• Installation CD
• Ethernet Cable
BUILD YOUR BOX
Number of Switches (Select One):
Connector (Select One):
SMA (DC-18GHz)
SMB (DC-3GHz)
Terminated
1 (Enclosure A)
2 (Enclosure A)
4 (Enclosure B)
SMA (DC-26.5GHz)
N (DC-12GHz)
Non-Terminated
1 (Enclosure A)
2 (Enclosure A or B)
4 (Enclosure A or B)
TNC (DC-11GHz)
K (DC-40GHz)
K (DC-33GHz)
Remote Control (Select One):
Actuation Type (Select One):
USB Only
USB & Ethernet
Failsafe
Latching
* Only available in Non-Terminated Models
See Page 4, for Part Number List for switches used
For additional options, please contact factory.
© 2017 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
MMA SERIES Page 1
MMA SERIES\062017\Q2
Miniature Matrix: MMA Series
Controlled with USB or Ethernet
COAX SWITCHES
BLOCK DIAGRAM EXAMPLE
24 DC Input
TCP/IP
MICROCONTROLLER
USB
MECHANICAL OUTLINE FOR ENCLOSURE A
Max. Length with Switches= 7.75 (196.85)
Enclosure A :
UP TO 4 NON-TERMINATED SPDT
SWITCHES (SMA, K, SMB)
Enclosure A :
UP TO 2 TERMINATED SPDT SWITCHES
(SMA-T)
MMA SERIES Page 2
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2017 TELEDYNE COAX SWITCHES
MMA SERIES\062017\Q2
Miniature Matrix: MMA Series
Controlled with USB or Ethernet
COAX SWITCHES
MECHANICAL OUTLINE FOR ENCLOSURE B
Enclosure B: UP TO 4 TERMINATED SPDT
SWITCHES (SMA-T Only)
(.875)
[22.2]
(1.46)
[37.1]
(.50)
[12.7]
© 2017 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
MMA SERIES Page 3
MMA SERIES\062017\Q2
Miniature Matrix: MMA Series
Controlled with USB or Ethernet
COAX SWITCHES
Enclosure B: UP TO 4 TERMINATED SPDT
SWITCHES (SMA Only)
Enclosure B: UP TO 4 TERMINATED SPDT
SWITCHES (Type N Connector Only)
MMA SERIES Page 4
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
© 2017 TELEDYNE COAX SWITCHES
MMA SERIES\062017\Q2
Miniature Matrix: MMA Series
Controlled with USB or Ethernet
COAX SWITCHES
GLOSSARY
Actuator
SPDT Switch
An actuator is the electromechanical mechanism that A single-pole double-throw, bi-directional switch that can
transfers the RF contacts from one position to another upon be used as having one input and two outputs or two inputs
DC command.
and one output.
Ethernet
Switching Time
A high-speed interface used in local area networks (LAN). Switching time is the total interval beginning with the arrival
Ethernet is also known as IEEE 802.3 standard. DHCP or of the leading edge of the command pulse at the switch DC
Static IP can be configured through a web interface.
input and ending with the completion of the switch transfer,
including contact bounce. It consists of three parts: (1)
inductive delay in the coil, (2) transfer time of the physical
Isolation
Isolation is the measure of the power level at the output movement of the contacts, and (3) the bounce time of the
connector of an unconnected RF channel as referenced to RF contacts. This does not include time added by the
the power at the input connector. It is specified in dB below communication interface, application or operating
the input power level.
system.
Magnetic Sensitivity
Universal Serial Bus (USB)
An electro-mechanical switch can be sensitive to ferrous An industry standard that defines the cables, connectors
materials and external magnetic fields. Neighboring ferrous and communication protocols used in a bus for connection,
materials should be permitted no closer than 0.5 inches and communication and power supply between computers and
adjacent external magnetic fields should be limited to a flux electronic devices. VCP Driver available for Windows OS,
density of less than 5 Gauss.
Mac OS, and Linux.
Performance Parameters vs Frequency
Termination
Generally speaking, the RF performance of coaxial switches When not connected to the common port, RF ports are
is frequency dependent. With increasing frequency, VSWR shunted to ground via a 50Ω path, rated for 1W.
and insertion loss increase while isolation decreases. All
data sheets specify these three parameters as “worst case”
at the highest operating frequency. If the switch is to be
used over a narrow frequency band, better performance
can be achieved.
Switch Specification List
Connector Frequency Series
Link
http://www.teledynecoax.com/pdf/coaxialswitches/CCR-53S_CR-53S%20FAILSAFE.pdf
SMA
DC-18GHz
DC-18GHz
DC-26.5GHz
DC-26.5GHz
DC-33GHz
DC-40GHz
DC-3GHz
CCR-33S
CCS-37S
CCR-53S
CCRT-53S
CCR-33K
CCR-40K
CCR-33M
CCS-32
http://www.teledynecoax.com/pdf/coaxialswitches/CCS-37S_FAILSAFE_SHORT.pdf
http://www.teledynecoax.com/pdf/coaxialswitches/CCR-33S_CR-33S%20FAILSAFE.pdf
http://www.teledynecoax.com/pdf/coaxialswitches/CCRT-53S_CRT-53S%20FAILSAFE.pdf
http://www.teledynecoax.com/pdf/coaxialswitches/CCR-33K_CR-33K%20FAILSAFE.pdf
http://www.teledynecoax.com/pdf/coaxialswitches/CCR-40K%20FAILSAFE.pdf
http://www.teledynecoax.com/pdf/coaxialswitches/CCR-33M_CR-33M%20FAILSAFE.pdf
http://www.teledynecoax.com/pdf/coaxialswitches/CCS-32_CS-32%20FAILSAFE.pdf
SMA
SMA
SMA
2.92mm
2.92mm
SMB
N, TNC
DC-12GHz
ORDERING CODE
4 A F - HF26T
Example:
Options
None = SMA DC-18GHz
T = Terminated
SMB = SMB connectors
HF## = High Frequency (GHz)
HPN = High Power Type N connectors
HPT = High Power TNC connectors
# of Switches
A = SPDT
Options
F = Failsafe, L = Latching
© 2017 TELEDYNE RELAYS
(800) 284-7007 • www.teledynecoax.com
MMA SERIES Page 5
MMA SERIES\062017\Q2
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明