NLV32T-101J-PF [TDK]
General Purpose Inductor, 100uH, 5%, 1 Element, Ferrite-Core, SMD, 1210, HALOGEN FREE AND ROHS COMPLIANT;型号: | NLV32T-101J-PF |
厂家: | TDK ELECTRONICS |
描述: | General Purpose Inductor, 100uH, 5%, 1 Element, Ferrite-Core, SMD, 1210, HALOGEN FREE AND ROHS COMPLIANT 测试 射频感应器 电感器 |
文件: | 总10页 (文件大小:264K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
I N D U C T O R S
September 2017
Inductors for Standard Circuits
Wound Ferrite
NLV-PF Series
NLV32-PF Type
NLV32-PF
3225 [1210 inch]*
* Dimensions Code JIS[EIA]
Caution
The products in this catalog is not recommended
to a new design
Please refer to our Web site about replacement information.
The products in this catalog is not recommended to a new design
(2/10)
I N D U C T O R S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(3/10)
I N D U C T O R S
Product compatible with RoHS directive
Halogen-free
Inductors for Standard Circuits
Wound Ferrite
Compatible with lead-free solders
Overview of NLV32-PF Type
FEATURES
Resin mold type wound inductor for standard circuits.
E-12 Series, wide lineup compatible with J ( 5%) tolerance, can be used for applications that need to meet strict L tolerance such as
filter circuits.
Has excellent inductance temperature characteristics in the operating temperature range.
APPLICATION
Smart meters, AV equipment, xDSL, electronic devices for communications infrastructure such as mobile base stations, industrial
equipment, other
PART NUMBER CONSTRUCTION
NLV
32
T
-
010
-
J
-
PF
L×W×H Dimensions
(mm)
Inductance
(µH)
Inductance
tolerance
Series name
Packaging style
Internal code
32
3.2×2.5×2.2
T
Taping
010
0.01
0.1
1
10
100
J
5%
Compatible with the RoHS
Directive, Exemption
regulations apply
R10
1R0
100
101
PF
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating Storage
Type
temperature
temperature
(pieces/reel)
(°C)
(°C)
(mg)
NLV32-PF
–40 to +105
–40 to +105
2000
50
Operating temperature range includes self-temperature rise.
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details.https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(4/10)
I N D U C T O R S
NLV32-PF Type
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
90 to 120s
Time
t2
40s
Time
t3
10s max.
T2
180°C
150°C
230°C
255°C
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(5/10)
I N D U C T O R S
NLV32-PF Type
SHAPE & DIMENSIONS
470J
(
)
(
)
(
)
3.2 0.2
0.55
0.55
2.1
0.55
Dimensions in mm
RECOMMENDED LAND PATTERN
1.2
2
1.2
Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(6/10)
I N D U C T O R S
NLV32-PF Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current
L
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Part No.
(µH)
0.01
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.1
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1
Tolerance
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
min.
15
17
19
21
23
23
25
25
26
26
27
27
28
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
(MHz)min.
2500
2300
2100
1900
1700
1500
1400
1300
1200
1100
1000
900
700
500
450
400
350
320
300
250
220
180
160
140
120
100
85
(Ω)max.
0.13
0.14
0.16
0.18
0.2
0.22
0.24
0.27
0.3
0.33
0.36
0.4
0.44
0.22
0.25
0.28
0.32
0.36
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
0.85
0.9
(mA)max.
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
400
390
370
350
320
290
260
250
220
200
180
170
NLV32T-010J-PF
NLV32T-012J-PF
NLV32T-015J-PF
NLV32T-018J-PF
NLV32T-022J-PF
NLV32T-027J-PF
NLV32T-033J-PF
NLV32T-039J-PF
NLV32T-047J-PF
NLV32T-056J-PF
NLV32T-068J-PF
NLV32T-082J-PF
NLV32T-R10J-PF
NLV32T-R12J-PF
NLV32T-R15J-PF
NLV32T-R18J-PF
NLV32T-R22J-PF
NLV32T-R27J-PF
NLV32T-R33J-PF
NLV32T-R39J-PF
NLV32T-R47J-PF
NLV32T-R56J-PF
NLV32T-R68J-PF
NLV32T-R82J-PF
NLV32T-1R0J-PF
NLV32T-1R2J-PF
NLV32T-1R5J-PF
NLV32T-1R8J-PF
NLV32T-2R2J-PF
NLV32T-2R7J-PF
NLV32T-3R3J-PF
NLV32T-3R9J-PF
NLV32T-4R7J-PF
NLV32T-5R6J-PF
NLV32T-6R8J-PF
NLV32T-8R2J-PF
100
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
80
75
70
60
55
50
45
40
1
1.1
1.2
1.3
1.5
1.6
1.8
2
5.6
6.8
8.2
35
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial L value)
Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
4191A+16092A
4194A+16085A+16093B
8753C
L, Q
Keysight Technologies
Self-resonant frequency
DC resistance
Keysight Technologies
Panasonic
VP-2941A
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(7/10)
I N D U C T O R S
NLV32-PF Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Rated current
L
Q
L, Q measuring
frequency
Self-resonant
frequency
DC resistance
Part No.
(µH)
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
Tolerance
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
5%
min.
30
30
30
30
30
30
30
30
30
30
30
30
20
20
20
20
20
20
20
20
20
(MHz)
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
0.796
0.796
0.796
0.796
0.796
0.796
0.796
0.796
0.796
(MHz)min.
(Ω)max.
2.1
2.5
2.8
3.3
3.7
5
5.6
6.4
7
8
9
10
10
11
15
17
21
(mA)max.
150
140
130
120
110
80
70
65
60
55
50
45
40
70
65
60
50
45
30
20
20
20
20
20
17
16
15
13
12
11
10
10
8
NLV32T-100J-PF
NLV32T-120J-PF
NLV32T-150J-PF
NLV32T-180J-PF
NLV32T-220J-PF
NLV32T-270J-PF
NLV32T-330J-PF
NLV32T-390J-PF
NLV32T-470J-PF
NLV32T-560J-PF
NLV32T-680J-PF
NLV32T-820J-PF
NLV32T-101J-PF
NLV32T-121J-PF
NLV32T-151J-PF
NLV32T-181J-PF
NLV32T-221J-PF
NLV32T-271J-PF
NLV32T-331J-PF
NLV32T-391J-PF
NLV32T-471J-PF
7
7
6
5
5
4
5%
5%
5%
5%
28
34
36
40
40
35
25
5%
Rated current: smaller value of either Idc1 or Idc2.
Idc1: When based on the inductance change rate (10% below the initial L value)
Idc2: When based on the temperature increase (Temperature increase of 20°C by self heating)
○ Measurement equipment
Measurement item
Product No.
Manufacturer
4191A+16092A
4194A+16085A+16093B
8753C
L, Q
Keysight Technologies
Self-resonant frequency
DC resistance
Keysight Technologies
Panasonic
VP-2941A
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(8/10)
I N D U C T O R S
NLV32-PF Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH
10000
471J
391J
331J
271J
181J
221J
101J
1000
100
10
151J
820J
121J
100J
8R2J
6R8J
5R6J
4R7J
3R9J
3R3J
2R7J
2R2J
1R8J
680J
560J
470J
390J
330J
270J
220J
180J
150J
120J
R82J
R68J
R56J
R47J
1R5J
1R2J
R39J
R33J
R27J
1
1R0J
082J
R22J
R10J
0.1
0.01
0.001
027J
022J
018J
047J
056J
068J
010J 012J
R12J
R15J R18J
033J
015J
039J
0.1
1
10
100
1000
(
)
Frequency MHz
○ Measurement equipment
Product No.
Manufacturer
4291A
4294A
Keysight Technologies
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(9/10)
I N D U C T O R S
NLV32-PF Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH
70
056J
068J
039J
60
047J
082J
50
033J
180J
100J
1R2J
220J
4R7J
8R2J
6R8J
027J
1R0J
40
30
20
10
0
270J
1R5J
010J
012J
820J
120J
1R8J
391J
R10J
2R7J
2R2J
R82J
R56J
R39J
330J
R15J
390J
5R6J
150J
221J
271J
121J
015J
R12J
3R3J
3R9J
018J
470J
022J
560J
R47J
R68J
680J
R18J
331J
R22J
R27J
101J
151J
R33J
181J
471J
0.1
1
10
100
1000
(
)
Frequency MHz
○ Measurement equipment
Product No.
Manufacturer
4291A
4294A
Keysight Technologies
Keysight Technologies
* Equivalent measurement equipment may be used.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
The products in this catalog is not recommended to a new design
(10/10)
I N D U C T O R S
NLV32-PF Type
PACKAGING STYLE
REEL DIMENSIONS
2.0 0.5
E
Type
NLV32-PF
A
ø180
W1
9
W2
13
N
ø60
E
0.5
* These values are typical values.
(
)
1.0
ø13.0 0.5
ø21.0 0.8
W1
W2
A
Dimensions in mm
TAPE DIMENSIONS
øD0
P2
P0
P1
K
t
Dimensions in mm
A
Type
A
B
øD0
E
F
P0
P1
P2
W
K
t
NLV32-PF
2.8
3.5
1.5+0.1/-0 1.75 0.1 3.50 0.05 4.00 0.10 4.00 0.10 2.00 0.05 8.00 0.30 2.3
0.4
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170920 / inductor_commercial_standard_nlv32-pf_en.
相关型号:
©2020 ICPDF网 联系我们和版权申明