MLG1005S5N1BT [TDK]
SMD Inductors(Coils) For High Frequency(Multilayer); SMD电感器(线圈),高频(多层)型号: | MLG1005S5N1BT |
厂家: | TDK ELECTRONICS |
描述: | SMD Inductors(Coils) For High Frequency(Multilayer) |
文件: | 总6页 (文件大小:78K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
(1/6)
Conformity to RoHS Directive
SMD Inductors(Coils)
For High Frequency(Multilayer)
MLG Series MLG1005S Type
FEATURES
PRODUCT IDENTIFICATION
MLG 1005 2N2
(1) (2) (3) (4) (5) (6)
• Nominal inductance values are supported from 0.3 to 390nH.
• Provides high Q characteristics.
S
S
T
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
(1) Series name
(2) Dimensions
1005
• The products contain no lead and also support lead-free
soldering.
1.0× 0.5mm (L× W)
• It is a product conforming to RoHS directive.
(3) Material code
APPLICATIONS
(4) Inductance value
For high-frequency applications including mobile phones, high
frequency modules (PA, VCO, FEM etc.), Bluetooth, W-LAN, UWB
and tuners.
2N2
12N
R10
2.2nH
12nH
100nH
(5) Inductance tolerance
SHAPES AND DIMENSIONS
B
C
S
H
J
0.1nH
0.2nH
0.3nH
3%
1.0 0.05
5%
(6) Packaging style
T
Taping (reel)
0.25 0.1
SPECIFICATIONS
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C [Unit of products]
Weight: 1mg
PACKAGING STYLE AND QUANTITIES
RECOMMENDED PC BOARD PATTERN
Packaging style
Taping
Quantity
10000 pieces/reel
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
0.4 to 0.5 0.4 to 0.5 0.4 to 0.5
Dimensions in mm
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
350°C. Soldering time should not exceed 3 seconds.
10s max.
250 to 260˚C
230˚C
Natural
cooling
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• Please contact our Sales office when your application are considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
• All specifications are subject to change without notice.
006-01 / 20070703 / e521_mlg1005.
(2/6)
ELECTRICAL CHARACTERISTICS
Self-resonant
frequency
(GHz)
DC resistance
(Ω)
Inductance
(nH)
Inductance
tolerance
Q
min.
Test frequency
L, Q (MHz)
Rated current
(mA)max.
Part No.
min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
8.00
8.00
7.50
7.50
7.50
7.00
7.00
6.00
5.50
5.00
5.00
5.00
4.50
4.50
4.00
4.00
4.00
3.50
3.00
3.00
3.00
2.50
2.50
2.20
2.00
1.70
1.60
1.40
1.20
1.10
1.00
0.80
0.70
0.70
0.60
0.55
0.50
0.45
0.40
0.35
0.30
typ.
20up
20up
20up
20up
18.7
16.4
17.7
13.8
19.3
11.6
11.7
9.6
9.4
10.3
9.3
8.6
8.2
7.3
6.8
6.1
6.7
6.5
6.0
5.4
5.0
5.3
4.7
4.4
4.1
4.0
3.8
3.4
3.0
2.8
2.5
2.2
2.0
max.
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.12
0.15
0.15
0.15
0.15
0.15
0.20
0.20
0.20
0.20
0.20
0.25
0.25
0.25
0.25
0.25
0.25
0.30
0.30
0.35
0.40
0.55
0.60
0.70
0.80
0.90
1.00
1.20
1.30
1.50
1.60
2.00
2.20
3.50
3.80
4.20
4.80
7.00
8.00
typ.
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.2, 0.3nH
0.2, 0.3nH
0.2, 0.3nH
0.2, 0.3nH
3%, 0.3nH
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
—
—
—
—
—
—
—
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
6
6
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50
0.01
0.01
0.01
0.01
0.02
0.02
0.04
0.04
0.03
0.04
0.04
0.06
0.05
0.06
0.07
0.08
0.08
0.08
0.09
0.09
0.09
0.11
0.11
0.12
0.13
0.14
0.16
0.15
0.15
0.19
0.20
0.22
0.25
0.35
0.40
0.46
0.53
0.59
0.65
0.75
0.83
0.87
1.01
1.37
1.48
2.44
2.88
3.02
3.54
5.21
5.97
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
1000
900
900
900
800
800
800
800
700
700
700
700
600
600
600
600
500
500
500
500
400
400
350
350
300
300
250
250
200
200
200
200
150
150
150
100
100
50
MLG1005S0N3∗T
MLG1005S0N4T
MLG1005S0N5T
MLG1005S0N6T
MLG1005S0N7T
MLG1005S0N8T
MLG1005S0N9T
MLG1005S1N0T
MLG1005S1N1T
MLG1005S1N2T
MLG1005S1N3T
MLG1005S1N5T
MLG1005S1N6T
MLG1005S1N8T
MLG1005S2N0T
MLG1005S2N2T
MLG1005S2N4T
MLG1005S2N7T
MLG1005S3N0T
MLG1005S3N3T
MLG1005S3N6T
MLG1005S3N9T
MLG1005S4N3T
MLG1005S4N7T
MLG1005S5N1T
MLG1005S5N6T
MLG1005S6N2T
MLG1005S6N8T
MLG1005S7N5T
MLG1005S8N2T
MLG1005S9N1T
MLG1005S10NT
MLG1005S12NT
MLG1005S15NT
MLG1005S18NT
MLG1005S22NT
MLG1005S27NT
MLG1005S33NT
MLG1005S39NT
MLG1005S47NT
MLG1005S56NT
MLG1005S68NT
MLG1005S82NT
MLG1005SR10T
MLG1005SR12T
MLG1005SR15T
MLG1005SR18T
MLG1005SR22T
MLG1005SR27T
MLG1005SR33T
MLG1005SR39T
12
15
18
22
27
33
39
47
1.8
1.6
1.4
1.3
1.1
1.0
0.9
0.8
0.7
0.6
0.5
0.5
0.4
0.4
56
68
82
100
120
150
180
220
270
330
390
∗
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
3, 5%
50
50
: Please specify inductance tolerance, B ( 0.1nH), C ( 0.2nH), S ( 0.3nH), H ( 3%) or J ( 5%).
• Test equipment
Inductance Q : HP4291A+16193A, or equivalent
SRF: HP8720C, or equivalent
Rdc: YOKOGAWA TYPE7561, or equivalent
• Rated current : Value obtained when current flows and temperature has risen to under 20°C.
• All specifications are subject to change without notice.
006-01 / 20070703 / e521_mlg1005.
(3/6)
L, Q vs. FREQUENCY CHARACTERISTICS
Inductance(nH)typ.
Part No.
Q typ.
500MHz
39
41
26
22
22
26
21
22
23
23
22
23
23
20
21
22
21
22
24
24
21
22
24
23
23
22
24
23
24
23
24
24
23
23
23
22
20
20
20
19
19
17
16
14
12
11
8
500MHz
0.3
800MHz
0.3
1.8GHz
0.3
0.4
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.2
1.4
1.5
1.7
1.9
2.1
2.3
2.6
3.0
3.3
3.6
3.9
4.3
4.8
5.4
5.8
6.8
7.4
8.6
9.3
10.8
12.4
16.2
22.0
29.0
44.5
92.4
314.7
ꢀ
2.0GHz
0.3
0.4
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.2
1.5
1.6
1.7
1.9
2.1
2.3
2.7
3.0
3.4
3.6
3.9
4.4
4.9
5.6
5.9
7.1
7.8
9.2
9.9
11.6
13.5
18.3
26.0
36.1
65.1
317.8
ꢀ
2.4GHz
0.3
0.4
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.2
1.5
1.6
1.7
1.9
2.2
2.4
2.7
3.1
3.5
3.8
4.1
4.6
5.2
6.1
6.3
7.8
8.6
10.5
11.3
13.7
16.7
25.5
41.7
74.4
341.5
ꢀ
800MHz
48
48
32
27
28
34
27
29
29
29
27
29
29
26
25
27
26
27
29
30
26
28
30
30
29
28
29
28
30
28
30
30
29
28
28
27
23
23
21
20
18
15
11
6
1.8GHz
99
98
58
46
45
57
44
48
47
48
44
47
46
41
41
44
42
43
47
46
40
43
47
45
42
42
42
40
41
38
40
37
33
29
26
21
10
3
2.0GHz
117
109
63
49
49
60
47
50
50
50
47
50
49
43
43
47
44
45
49
48
42
45
49
47
43
43
43
41
41
38
39
36
31
26
22
14
3
2.4GHz
127
117
69
53
54
66
53
56
57
56
53
56
54
49
48
52
49
50
54
53
46
50
53
50
44
45
43
41
39
36
36
31
23
17
11
2
MLG1005S0N3∗T
MLG1005S0N4T
MLG1005S0N5T
MLG1005S0N6T
MLG1005S0N7T
MLG1005S0N8T
MLG1005S0N9T
MLG1005S1N0T
MLG1005S1N1T
MLG1005S1N2T
MLG1005S1N3T
MLG1005S1N5T
MLG1005S1N6T
MLG1005S1N8T
MLG1005S2N0T
MLG1005S2N2T
MLG1005S2N4T
MLG1005S2N7T
MLG1005S3N0T
MLG1005S3N3T
MLG1005S3N6T
MLG1005S3N9T
MLG1005S4N3T
MLG1005S4N7T
MLG1005S5N1T
MLG1005S5N6T
MLG1005S6N2T
MLG1005S6N8T
MLG1005S7N5T
MLG1005S8N2T
MLG1005S9N1T
MLG1005S10NT
MLG1005S12NT
MLG1005S15NT
MLG1005S18NT
MLG1005S22NT
MLG1005S27NT
MLG1005S33NT
MLG1005S39NT
MLG1005S47NT
MLG1005S56NT
MLG1005S68NT
MLG1005S82NT
MLG1005SR10T
MLG1005SR12T
MLG1005SR15T
MLG1005SR18T
MLG1005SR22T
MLG1005SR27T
MLG1005SR33T
MLG1005SR39T
∗
0.4
0.5
0.6
0.7
0.8
0.9
0.9
1.0
1.1
1.2
1.4
1.5
1.7
1.9
2.1
2.3
2.6
2.9
3.2
3.4
3.7
4.1
4.5
4.9
5.4
6.0
6.5
7.2
7.9
8.8
9.7
11.7
14.7
17.7
21.8
27.0
33.5
40.3
50.2
60.9
75.8
96.9
128.9
175.2
284.7
422.4
874.6
0.4
0.5
0.6
0.7
0.8
0.8
0.9
1.0
1.1
1.2
1.4
1.5
1.7
1.9
2.1
2.3
2.6
2.9
3.2
3.4
3.7
4.1
4.5
4.9
5.4
6.0
6.6
7.4
8.0
9.0
9.9
12.1
15.3
18.6
23.3
29.6
37.8
46.9
63.2
80.2
107.5
164.8
325.8
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
1
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
5
1
ꢀ
ꢀ
ꢀ
ꢀ
: Please specify inductance tolerance, B ( 0.1nH), C ( 0.2nH), S ( 0.3nH), H ( 3%) or J ( 5%).
• All specifications are subject to change without notice.
006-01 / 20070703 / e521_mlg1005.
(4/6)
TYPICAL ELECTRICAL CHARACTERISTICS
INDUCTANCE vs. FREQUENCY CHARACTERISTICS
Q vs. FREQUENCY CHARACTERISTICS
1000
50
3.3nH
10nH
1.0nH
270nH
100nH
100
40
30
20
10
0
33nH
10nH
10
3.3nH
1.0nH
1
100nH
33nH
270nH
0
10
100
1000
10000
10
100
)
Frequency MHz
1000
10000
(
)
Frequency MHz
(
• All specifications are subject to change without notice.
006-01 / 20070703 / e521_mlg1005.
(5/6)
MLG Series MLG1005M Type (For Wireless LAN & Bluetooh)
FEATURES
PRODUCT IDENTIFICATION
MLG 1005 M 2N2
(1) (2) (3) (4) (5) (6)
• Nominal inductance values are supported from 0.6 to 5.6nH.
• Provides high Q characteristics.
B
T
• Advanced monolithic structure is formed using a multilayering
and sintering process with ceramic and conductive materials for
high-frequency.
(1) Series name
• The products contain no lead and also support lead-free
soldering.
(2) Dimensions
1005
1.0× 0.5mm(L× W)
• It is a product conforming to RoHS directive.
(3) Material code
APPLICATIONS
(4) Inductance value
The most suitable in high frequency circuit of 2.4GHz and 5GHz
wireless LAN & Bluetooh.
2N2
5N6
2.2nH
5.6nH
SHAPES AND DIMENSIONS
(5) Inductance tolerance
B
1.0 0.05
0.1nH
(6) Packaging style
T
Taping (reel)
SPECIFICATIONS
0.25 0.1
Operating temperature range
Storage temperature range
–55 to +125°C
–55 to +125°C [Unit of products]
PACKAGING STYLE AND QUANTITIES
Weight: 1mg
Packaging style
Taping
Quantity
15000 pieces/reel
RECOMMENDED PC BOARD PATTERN
HANDLING AND PRECAUTIONS
• Before soldering, be sure to preheat components.
The preheating temperature should be set so that the
temperature difference between the solder temperature and
product temperature does not exceed 150°C.
0.4 to 0.5 0.4 to 0.5 0.4 to 0.5
Dimensions in mm
• After mounting components onto the printed circuit board, do not
apply stress through board bending or mishandling.
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
• When hand soldering, apply the soldering iron to the printed
circuit board only. Temperature of the iron tip should not exceed
300°C. Soldering time should not exceed 3 seconds.
10s max.
250 to 260˚C
230˚C
Natural
cooling
180˚C
150˚C
Preheating
60 to 120s
Soldering
30 to 60s
Time(s)
• All specifications are subject to change without notice.
006-01 / 20070703 / e521_mlg1005.
(6/6)
PACKAGING STYLES
REEL DIMENSIONS
1.0
2.0 0.5
9.0 0.3
ø13 0.5
ø21 0.8
13.0 1.4
ø178 2.0
Dimensions in mm
TAPE DIMENSIONS
+0.1
–0.0
1.5
Sprocket hole
Cavity
0.8max.
0.65 0.1
4.0 0.1
2.0 0.05
2.0 0.05
160min.
Taping
200min.
300min.
Drawing direction
Dimensions in mm
• All specifications are subject to change without notice.
006-01 / 20070703 / e521_mlg1005.
相关型号:
MLG1005S5N1CT000
General Purpose Inductor, 0.0051uH, 3.922%, 1 Element, Ferrite-Core, SMD, 1005, CHIP, 1005
TDK
©2020 ICPDF网 联系我们和版权申明