MLG0603P5N6JT [TDK]
General Purpose Inductor, 0.0056uH, 5%, 1 Element, Ceramic-Core, SMD, 0201, CHIP, 0201, HALOGEN FREE AND ROHS COMPLIANT;型号: | MLG0603P5N6JT |
厂家: | TDK ELECTRONICS |
描述: | General Purpose Inductor, 0.0056uH, 5%, 1 Element, Ceramic-Core, SMD, 0201, CHIP, 0201, HALOGEN FREE AND ROHS COMPLIANT 测试 射频感应器 电感器 |
文件: | 总12页 (文件大小:127K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
I
N
D
U
C
T
O
R
S
October 2013
Inductors for High Frequency Circuits
Multilayer Ceramic
MLG-Pseries(For automobiles)
MLG0603P
0603 [0201 inch]*
* Dimensions Code JIS[EIA]
(2/12)
I
N
D
U
C
T
O
R
S
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(13) Other applications that are not considered general-purpose
applications
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(3/12)
I
N
D
U
C
T
O
R
S
Product compatible with RoHS directive
Halogen-free
Inductors for High Frequency Circuits
Multilayer Ceramic
Compatible with lead-free solders
AEC-Q200
Overview of the MLG-P Series
FEATURES
High Q type inductor for high-frequency circuits.
The 0402 Series has0.2 to 33nH, and the 0603 Series has 0.6 to 120nH.
0.1n step inductance lineup.
Compared with existing products, the size was greatly reduced, making it optimal for fine-pitch circuits.
Optimal configuration that greatly improves the Q to 800MHz or higher.
Advanced monolithic structure is formed using a multilayering and sintering process with ceramic and conductive materials for High-
frequency.
APPLICATION
Automotive equipment, smart phones, tablet terminals, high frequency modules (PAs, VCOs, FEMs , etc.), Bluetooth, W-LAN, UWB, tuners
and other high frequency circuits for the mobile communication industry
PART NUMBER CONSTRUCTION
MLG
0603
P
1N1
B
T
□□□
L×W×H Dimensions
(mm)
Inductance
(μH)
Inductance
tolerance
Series name
Characteristics
Packaging style
Internal code
0603
0.6×0.3×0.3
P
1N1
11N
1.1
11
B
0.1nH
0.2nH
0.3nH
3%
T
Taping
C
S
H
J
5%
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Temperature range
Package quantity
Individual weight
Operating
temperature
Storage
temperature
Type
ꢀ
(pieces/reel)
(°C)
(°C)
(mg)
MLG0603P
–55 to +125
–55 to +125
15000
0.2
ꢀꢁꢁ
The Storage temperature range is for after the circuit board is mounted.
RoHS Directive Compliant Product: See the following for more details related to RoHS Directive compliant products. http://www.tdk.co.jp/rohs/
Halogen-free: Indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(4/12)
I
N
D
U
C
T
O
R
S
Overview of the MLG-P Series
RECOMMENDED REFLOW PROFILE
Preheating
Soldering
Natural
cooling
Peak
T4
T3
T3
T2
t3
t2
T1
t1
t: Time
Preheating
Temp.
T1
Soldering
Temp.
T3
Peak
Temp.
T4
Time
t1
60 to 120s
Time
t2
30 to 60s
Time
t3
10s max.
T2
180°C
150°C
230°C
250 to 260°C
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(5/12)
I
N
D
U
C
T
O
R
S
MLG-Pseries
MLG0603P Type
SHAPE & DIMENSIONS
0.09 0.04
0.09 0.04
0.60 0.03
Dimensions in mm
0.15 0.05
0.15 0.05
RECOMMENDED LAND PATTERN
0.25
0.3
0.25
Dimensions in mm
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(6/12)
I
N
D
U
C
T
O
R
S
MLG-Pseriesꢀ
MLG0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Self-resonant
frequency
(GHz)
DC resistance
(ꢂ)
L, Q measuring
Rated current
(mA)
max.
L
Q
Part No.ꢀ
frequency
min.
(MHz)
(nH)
0.6
Tolerance
0.1, 0.2nH
0.1, 0.2nH
0.1, 0.2nH
min.
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
9.0
typ.
20.0
20.0
20.0
20.0
20.0
19.9
16.0
13.9
11.7
14.9
13.4
12.8
10.7
10.9
10.1
9.8
max.
0.06
0.06
0.06
0.06
0.07
0.07
0.08
0.08
0.09
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.10
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.20
0.30
0.30
0.40
0.40
0.40
0.40
0.40
0.40
0.40
0.70
0.75
0.80
0.85
0.90
typ.
0.01
0.01
0.02
0.02
0.02
0.03
0.04
0.03
0.04
0.03
0.03
0.02
0.03
0.04
0.03
0.05
0.07
0.07
0.12
0.09
0.14
0.14
0.10
0.10
0.14
0.10
0.14
0.13
0.13
0.12
0.10
0.14
0.24
0.22
0.21
0.29
0.24
0.24
0.16
0.30
0.32
0.59
0.62
0.70
0.71
0.76
—
—
—
—
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
500
1000
1000
1000
1000
1000
1000
800
800
800
800
700
700
700
600
600
600
600
600
500
500
500
500
500
500
450
450
450
450
450
450
400
400
400
400
350
350
350
350
350
350
350
300
300
300
250
250
MLG0603P0N6△T□□□
MLG0603P0N7△T□□□
MLG0603P0N8△T□□□
MLG0603P0N9△T□□□
MLG0603P1N0△T□□□
MLG0603P1N1△T□□□
MLG0603P1N2△T□□□
MLG0603P1N3△T□□□
MLG0603P1N4△T□□□
MLG0603P1N5△T□□□
MLG0603P1N6△T□□□
MLG0603P1N7△T□□□
MLG0603P1N8△T□□□
MLG0603P1N9△T□□□
MLG0603P2N0△T□□□
MLG0603P2N1△T□□□
MLG0603P2N2△T□□□
MLG0603P2N3△T□□□
MLG0603P2N4△T□□□
MLG0603P2N5△T□□□
MLG0603P2N6△T□□□
MLG0603P2N7△T□□□
MLG0603P2N8△T□□□
MLG0603P2N9△T□□□
MLG0603P3N0△T□□□
MLG0603P3N1△T□□□
MLG0603P3N2△T□□□
MLG0603P3N3△T□□□
MLG0603P3N4△T□□□
MLG0603P3N5△T□□□
MLG0603P3N6△T□□□
MLG0603P3N7△T□□□
MLG0603P3N8△T□□□
MLG0603P3N9△T□□□
MLG0603P4N0△T□□□
MLG0603P4N1△T□□□
MLG0603P4N2△T□□□
MLG0603P4N3△T□□□
MLG0603P4N7△T□□□
MLG0603P5N1△T□□□
MLG0603P5N6△T□□□
MLG0603P6N2△T□□□
MLG0603P6N8△T□□□
MLG0603P7N5△T□□□
MLG0603P8N2△T□□□
MLG0603P9N1△T□□□
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
0.1, 0.2nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
0.1, 0.2, 0.3nH
3%, 5%, 0.3nH
3%, 5%, 0.3nH
3%, 5%, 0.3nH
3%, 5%, 0.3nH
3%, 5%, 0.3nH
3%, 5%
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
14
9.0
8.5
8.0
7.5
9.0
7.5
8.4
7.5
7.5
10.9
9.9
7.5
7.5
7.5
10.1
10.0
9.9
7.5
9.2
7.5
9.1
7.5
8.8
7.5
8.4
7.5
8.4
7.0
8.1
6.5
8.0
6.5
7.7
6.5
7.4
5.8
7.0
5.8
7.1
5.8
6.7
5.8
6.7
5.8
6.6
5.8
6.7
5.5
6.9
5.5
6.6
4.0
5.3
4.0
6.3
4.0
6.1
3%, 5%
3%, 5%
3%, 5%
4.0
5.4
4.0
5.2
4.0
5.0
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), H( 3%) or J( 5%).
Please contact us for information on inductance tolerance, G ( 2%).
* The " □□□ " of the Part Number contains the internal code.
○ Short bar residual inductance =0.43nH
○ Measurement equipment
Measurement item
Product No.
4291B+16197A
8720C
Manufacturer
L, Q
Agilent Technologies
Agilent Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(7/12)
I
N
D
U
C
T
O
R
S
MLG-Pseriesꢀ
MLG0603P Type
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
Self-resonant
frequency
(GHz)
DC resistance
(ꢂ)
L, Q measuring
Rated current
(mA)
max.
L
Q
Part No.ꢀ
frequency
min.
(MHz)
(nH)
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
tolerance
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
3%, 5%
min.
4.0
3.5
3.5
3.2
3.2
3.0
3.0
2.2
2.2
2.2
2.2
1.8
1.8
1.8
1.8
1.6
1.6
1.4
1.4
1.2
1.2
1.0
1.0
0.9
0.9
0.8
0.8
typ.
4.7
4.5
4.3
4.2
3.7
3.6
3.5
3.3
2.9
2.9
2.7
2.3
2.4
2.2
2.2
2.0
2.0
1.9
1.8
1.6
1.6
1.5
1.5
1.3
1.3
1.1
1.0
max.
0.95
1.00
1.10
1.10
1.20
1.20
1.40
1.90
1.90
2.10
2.10
2.20
2.20
2.40
2.40
2.90
2.90
3.50
3.50
3.50
3.50
4.00
4.00
4.50
4.50
5.00
5.00
typ.
0.85
0.64
0.82
0.87
0.94
1.00
1.04
1.33
1.31
1.17
1.45
1.37
1.55
1.49
1.72
1.61
2.18
1.87
2.35
2.12
2.69
2.59
2.71
2.92
3.20
3.50
3.79
14
14
14
14
14
14
14
14
14
14
14
10
10
10
10
10
10
10
10
10
9
500
500
500
500
500
500
500
500
500
500
500
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
250
250
250
250
250
200
200
150
150
140
140
130
130
120
120
110
110
100
100
100
100
80
MLG0603P10N△T□□□
MLG0603P11N△T□□□
MLG0603P12N△T□□□
MLG0603P13N△T□□□
MLG0603P15N△T□□□
MLG0603P16N△T□□□
MLG0603P18N△T□□□
MLG0603P20N△T□□□
MLG0603P22N△T□□□
MLG0603P24N△T□□□
MLG0603P27N△T□□□
MLG0603P30N△T□□□
MLG0603P33N△T□□□
MLG0603P36N△T□□□
MLG0603P39N△T□□□
MLG0603P43N△T□□□
MLG0603P47N△T□□□
MLG0603P51N△T□□□
MLG0603P56N△T□□□
MLG0603P62N△T□□□
MLG0603P68N△T□□□
MLG0603P75N△T□□□
MLG0603P82N△T□□□
MLG0603P91N△T□□□
MLG0603PR10△T□□□
MLG0603PR11△T□□□
MLG0603PR12△T□□□
9
9
9
9
9
9
80
80
80
80
80
ꢀꢁ The " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), H( 3%) or J( 5%).
Please contact us for information on inductance tolerance, G ( 2%).
* The " □□□ " of the Part Number contains the internal code.
○ Short bar residual inductance =0.43nH
○ Measurement equipment
Measurement item
Product No.
4291B+16197A
8720C
Manufacturer
L, Q
Agilent Technologies
Agilent Technologies
Yokogawa
Self-resonant frequency
DC resistance
Type-7561
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(8/12)
I
N
D
U
C
T
O
R
S
MLG-Pseriesꢀ
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
500MHz
16min.
16min.
16
17
16
17
18
17
18
17
17
17
17
18
19
18
18
18
16
17
17
17
17
17
17
17
17
18
18
18
18
Part No.ꢀ
500MHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
800MHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.2
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
1.8GHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.4
3.5
3.6
3.7
3.8
3.9
4.0
4.1
4.3
4.4
4.5
4.9
5.3
6.1
6.5
7.3
8.1
9.0
10.0
2.0GHz
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.4
2.4
2.5
2.6
2.7
2.8
2.9
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.9
4.0
4.1
4.2
4.3
4.5
4.5
5.0
5.4
6.2
6.7
7.5
8.3
9.3
10.3
2.4GHz
0.6
0.7
0.4
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
2.3
2.4
2.4
2.5
2.6
2.7
2.9
3.0
3.1
3.2
3.3
3.4
3.6
3.7
3.8
4.0
4.1
4.2
4.4
4.5
4.6
4.7
5.1
5.7
6.6
7.0
8.0
8.8
10.0
11.1
800MHz
22min.
22min.
22
22
21
23
24
22
23
22
22
22
22
24
23
23
23
22
21
22
22
21
22
22
21
22
22
22
23
23
22
23
22
1.8GHz
35min.
35min.
35
35
33
36
38
34
36
33
33
33
34
36
35
34
35
33
31
33
33
33
34
34
32
33
34
33
34
34
33
34
32
2.0GHz
37min.
37min.
37
37
36
38
40
36
39
35
35
35
35
38
37
36
36
35
33
34
35
35
36
35
34
34
35
35
35
35
34
35
33
2.4GHz
41min.
41min.
41
41
40
43
45
40
43
39
38
39
39
42
41
39
40
38
36
38
38
38
40
39
37
37
38
38
38
38
37
37
36
MLG0603P0N6△T□□□
MLG0603P0N7△T□□□
MLG0603P0N8△T□□□
MLG0603P0N9△T□□□
MLG0603P1N0△T□□□
MLG0603P1N1△T□□□
MLG0603P1N2△T□□□
MLG0603P1N3△T□□□
MLG0603P1N4△T□□□
MLG0603P1N5△T□□□
MLG0603P1N6△T□□□
MLG0603P1N7△T□□□
MLG0603P1N8△T□□□
MLG0603P1N9△T□□□
MLG0603P2N0△T□□□
MLG0603P2N1△T□□□
MLG0603P2N2△T□□□
MLG0603P2N3△T□□□
MLG0603P2N4△T□□□
MLG0603P2N5△T□□□
MLG0603P2N6△T□□□
MLG0603P2N7△T□□□
MLG0603P2N8△T□□□
MLG0603P2N9△T□□□
MLG0603P3N0△T□□□
MLG0603P3N1△T□□□
MLG0603P3N2△T□□□
MLG0603P3N3△T□□□
MLG0603P3N4△T□□□
MLG0603P3N5△T□□□
MLG0603P3N6△T□□□
MLG0603P3N7△T□□□
MLG0603P3N8△T□□□
MLG0603P3N9△T□□□
ꢀMLG0603P4N0△T□□□
ꢀMLG0603P4N1△T□□□
ꢀMLG0603P4N2△T□□□
MLG0603P4N3△T□□□
MLG0603P4N7△T□□□
MLG0603P5N1△T□□□
MLG0603P5N6△T□□□
MLG0603P6N2△T□□□
MLG0603P6N8△T□□□
MLG0603P7N5△T□□□
MLG0603P8N2△T□□□
MLG0603P9N1△T□□□
18
17
17
22
22
22
22
21
21
21
22
21
21
21
21
32
32
33
32
32
31
31
31
30
29
30
30
34
33
34
33
33
32
32
32
31
30
30
30
36
36
36
35
35
34
34
32
33
31
32
31
18
ꢀ
18
ꢀ
18
ꢀ
17
16
16
18
16
16
16
17
17
21
30
31
32
ꢀꢁꢁThe " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), H( 3%) or J( 5%).
Please contact us for information on inductance tolerance, G ( 2%).
* The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(9/12)
I
N
D
U
C
T
O
R
S
MLG-Pseriesꢀ
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L, Q FREQUENCY CHARACTERISTICS TABLE
L(nH)typ.
Q typ.
500MHz
16
Part No.ꢀ
500MHz
10
800MHz
10
1.8GHz
11
2.0GHz
12
2.4GHz
13
800MHz
21
23
22
22
22
22
22
22
21
22
21
21
17
17
17
16
16
16
15
15
15
13
13
12
12
9
1.8GHz
28
30
28
28
27
26
25
23
21
21
18
15
2.0GHz
28
30
28
28
26
25
24
22
2.4GHz
28
30
27
26
24
22
20
17
MLG0603P10N△T□□□
ꢀMLG0603P11N△T□□□
MLG0603P12N△T□□□
ꢀMLG0603P13N△T□□□
MLG0603P15N△T□□□
ꢀMLG0603P16N△T□□□
MLG0603P18N△T□□□
ꢀMLG0603P20N△T□□□
MLG0603P22N△T□□□
ꢀMLG0603P24N△T□□□
MLG0603P27N△T□□□
ꢀMLG0603P30N△T□□□
MLG0603P33N△T□□□
ꢀMLG0603P36N△T□□□
MLG0603P39N△T□□□
ꢀMLG0603P43N△T□□□
MLG0603P47N△T□□□
ꢀMLG0603P51N△T□□□
MLG0603P56N△T□□□
ꢀMLG0603P62N△T□□□
MLG0603P68N△T□□□
ꢀMLG0603P75N△T□□□
MLG0603P82N△T□□□
ꢀMLG0603P91N△T□□□
MLG0603PR10△T□□□
ꢀMLG0603PR11△T□□□
MLG0603PR12△T□□□
11
11
13
13
15
18
ꢀ
12
12
14
15
17
18
18
13
13
15
16
19
ꢀ
15
15
18
20
24
18
18
16
16
20
22
27
ꢀ
18
18
23
26
33
18
18
20
21
27
31
42
ꢀ
22
23
34
40
68
18
19
18
18
15
11
11
24
25
36
43
72
ꢀ
27
28
45
57
18
18
30
32
59
ꢀ
33
36
68
15
16
11
37
40
44
48
53
58
65
71
79
87
99
110
126
151
39
43
48
53
59
66
76
82
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
15
15
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
15
15
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
15
15
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
15
14
97
ꢀ
ꢀ
ꢀ
ꢀ
109
132
152
211
14
13
ꢀ
14
13
ꢀ
12
ꢀꢁꢁThe " △ " of the Part Number contains the inductance tolerance code, B( 0.1nH), C( 0.2nH), S( 0.3nH), H( 3%) or J( 5%).
Please contact us for information on inductance tolerance, G ( 2%).
* The " □□□ " of the Part Number contains the internal code.
○ Measurement equipment
Product No.
Manufacturer
4291B+16197A
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(10/12)
I
N
D
U
C
T
O
R
S
MLG-Pseriesꢀ
MLG0603P Type
ELECTRICAL CHARACTERISTICS
L FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
1000
R10
R12
68N
82N
56N
39N
47N
33N
27N
22N
100
10
1
18N
15N
12N
10N
8N2
6N8
5N6
4N7
3N9
3N3
2N7
2N2
1N8
1N5
1N2
1N0
0
10
100
1000
10000
(
)
Frequency MHz
○ Measurement equipment
Product No.
E4991A+16197A
Manufacturer
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(11/12)
I
N
D
U
C
T
O
R
S
MLG-Pseriesꢀ
MLG0603P Type
ELECTRICAL CHARACTERISTICS
Q FREQUENCY CHARACTERISTICS GRAPH (EXAMPLE)
50
1N2
1N0
1N5
1N8
2N7
3N3
40
30
20
10
0
3N9
4N7
2N2
5N6
6N8
8N2
10N
12N
15N
18N
56N
82N
47N
39N
33N
68N
22N
R10
R12
27N
10
100
1000
10000
(
)
Frequency MHz
○ Measurement equipment
Product No.
E4991A+16197A
Manufacturer
Agilent Technologies
* Equivalent measurement equipment may be used.
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
(12/12)
I
N
D
U
C
T
O
R
S
MLG-Pseries
Packaging Style
REEL DIMENSIONS
1.0
+2.0
2.0 0.5
ø13 0.2
ø21 0.8
8.4
–0.0
14.4max.
ø180 2.0
Dimensions in mm
TAPE DIMENSIONS
Type
A
B
K
MLG0603P
0.68 0.05 0.38 0.05
0.5 max.
+0.1
1.5
Sprocket hole
Cavity
–0.0
K
B
4.0 0.1
2.0 0.05
2.0 0.05
200min.
160min.
Taping
300min.
Drawing direction
• All specifications are subject to change without notice.
001-01 / 20131001 / inductor_automotive_high-frequency_mlg-qp_en.
相关型号:
MLG0603P5N6ST
General Purpose Inductor, 0.0056uH, 5.358%, 1 Element, Ceramic-Core, SMD, 0201, CHIP, 0201, HALOGEN FREE AND ROHS COMPLIANT
TDK
MLG0603P62NJT
General Purpose Inductor, 0.062uH, 5%, 1 Element, Ceramic-Core, SMD, 0201, CHIP, 0201, HALOGEN FREE AND ROHS COMPLIANT
TDK
©2020 ICPDF网 联系我们和版权申明