HF2318-A303Y0R6-01 [TDK]
Common Mode Choke Coils Line Filters For power line, Closed magnetic circuit core type; 共模扼流线圈线滤波器对电源线，闭路磁芯类型
| 型号： | HF2318-A303Y0R6-01 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | Common Mode Choke Coils Line Filters For power line, Closed magnetic circuit core type |
| 文件： | 总11页 (文件大小：329K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Common Mode Choke Coils(Line Filters)
For power line, Closed magnetic circuit core type
HF Series
Type:
Vertical type
HF2316/HF2318 /HF2922
For large inductance
HF2024/HF2422/HF2430/HF2826/HF2836/HF3545
Issue date:
December 2010
• All specifications are subject to change without notice.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(1/10)
Common Mode Choke Coils(Line Filters) for AC Power Supply
Conformity to RoHS Directive
Closed Magnetic Circuit Core Type HF Series
TDK common mode choke coils(line filters) are used in a wide
range of prevention of electromagnetic interference(EMI) and radio
frequency interference(RFI) from power supply lines and for pre-
vention of multifunctioning of products such as measuring equip-
ment and system equipment.
FEATURES
PRODUCT IDENTIFICATION
• Wide range of selection.
• High impedance at applicable frequency.
• High self-resonant frequency.
HF
(1)
V
A
Y
R
(6)
01
(7)
-
-
(2)
(3) (4)
(5)
(1) Core shape
HF: Square shaped closed magnetic circuit core type
(2) Dimensional code
Width×Depth
(3) External shape code
V: Vertical type H: Horizontal type
(4) High µ material
(5) Inductance valueꢀ
Example) 133:13mH
(6) Rated current value
Example) 3R0:3.0A
(7) Product management number
SELECTION CHART
Minimum
package quantity
(pieces/box)
Inductance value
(mH)min.
Rated current
(A)
Handling power∗
Weight
(g)typ.
Series
Configuration
Type
L×I2(mH×A2)
HF2316
HF2318
HF2922
HF2024
HF2422
HF2430
HF2826
HF2836
HF3545
1.2 to 145
1.5 to 100
3.2 to 100
0.6 to 33
2.4 to 68
2.4 to 68
1.8 to 35
1.8 to 35
4.7 to 33
0.2 to 3
0.3 to 3
0.5 to 3
0.3 to 3
0.4 to 2.5
0.4 to 2.5
1 to 4
10.5
13
29
7.6
15
15
35
35
75
10.5
13.5
20
800
800
440
800
540
400
480
400
140
Vertical type
10
HF
19.5
19.5
28
30
65
Closed magnetic
circuit
core types
1 to 4
1.5 to 4
∗ Handling power=(Inductance value)×(Current)2. It is possible to design within the range below this value.
[Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10.
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(2/10)
Closed Magnetic Circuit Core Type HF Series
FEATURES
• As closed magnetic circuit core as same as a toroidal core, even
at its compact size, it offers large inductance and keeps the high
impedance levels required in high frequency ranges.
• Since it uses a closed magnetic circuit core, the leakage flux is
relatively small, allowing designers to improve the mounting
density of their circuits.
HF2316-A(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
23max.
16max.
1000
144Y
823Y
533Y
403Y
263Y
100
ø0.8
4
15.5max.
1
1
2
10
4
3
203Y
153Y
103Y
652Y
2
3
1
Weight: 10.5g typ.
13 0.5
452Y
Recommended hole diameter: ø1.3
Dimensions in mm
242Y
172Y
122Y
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
DC resistance Rated current
Part No.
(Ω)max.
6.8
4
2.4
1.7
1.2
1
0.7
0.5
Iac(A)max.
2000
HF2316-A144Y0R2-01
HF2316-A823Y0R3-01
HF2316-A533Y0R4-01
HF2316-A403Y0R5-01
HF2316-A263Y0R6-01
HF2316-A203Y0R7-01
HF2316-A153Y0R8-01
HF2316-A103Y1R0-01
HF2316-A652Y1R2-01
HF2316-A452Y1R5-01
HF2316-A242Y2R0-01
HF2316-A172Y2R5-01
HF2316-A122Y3R0-01
145
82
53
40
26
20
15
10
6.5
4.5
2.4
1.7
1.2
0.2
0.3
0.4
0.5
0.6
0.7
0.8
1
100min.
45max.
–20 to +120
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
0.3
0.2
0.12
0.09
0.06
1.2
1.5
2
2.5
3
soldering tenperature∗1
Applicable safety
standard∗2
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
HF2316-A
800pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(3/10)
HF2318-A(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
23max.
18max.
1000
104Y
633Y
503Y
303Y
243Y
100
ø0.8
4
15.5max.
1
2
10
1
2
4
3
213Y
163Y
113Y
752Y
1
3
Weight: 13.5g typ.
13 0.5
Recommended hole diameter: ø1.3
Dimensions in mm
322Y
222Y
152Y
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Inductance
(mH)min.
DC resistance Rated current
Part No.
(Ω)max.
3.6
2.2
1.8
1.1
1
0.75
0.5
Iac(A)max.
2000
HF2318-A104Y0R3-01
HF2318-A633Y0R4-01
HF2318-A503Y0R5-01
HF2318-A303Y0R6-01
HF2318-A243Y0R7-01
HF2318-A213Y0R8-01
HF2318-A163Y1R0-01
HF2318-A113Y1R2-01
HF2318-A752Y1R5-01
HF2318-A322Y2R0-01
HF2318-A222Y2R5-01
HF2318-A152Y3R0-01
100
63
50
30
24
21
16
11
7.5
3.2
2.2
1.5
0.3
0.4
0.5
0.6
0.7
0.8
1
100min.
45max.
–20 to +120
–20 to +85
0.35
0.26
0.12
0.1
1.2
1.5
2
2.5
3
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
0.07
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
HF2316-A
800pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(4/10)
HF2922-A(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
29max.
22max.
1000
104Y
503Y
323Y
100
203Y
ø0.8
4
18max.
10
133Y
952Y
1
2
1
2
4
3
1
502Y
322Y
Weight: 20g typ.
3
13 0.5
Recommended hole diameter: ø1.3
Dimensions in mm
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
RATINGS
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
DC resistance Rated current
Part No.
(Ω)max.
1.7
Iac(A)max.
2000
HF2922-A104Y0R5-01
HF2922-A503Y0R8-01
HF2922-A323Y1R0-01
HF2922-A203Y1R2-01
HF2922-A133Y1R6-01
HF2922-A952Y2R0-01
HF2922-A502Y2R5-01
HF2922-A322Y3R0-01
100
50
32
20
13
9.5
5
0.5
0.8
1
0.95
0.59
0.38
0.25
0.19
0.12
0.08
100min.
45max.
1.2
1.6
2
–20 to +120
2.5
3
–20 to +85
3.2
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
soldering tenperature∗1
Applicable safety
standard∗2
PACKAGING QUANTITIES
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
HF2316-A
440pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(5/10)
HF2024(SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
22.5max.
100
123Y
622Y
10
242Y
ø0.8
18max.
L1
1
2
4
3
1
L2
13 0.5
601Y
Weight: 10g typ.
0.1
Recommended hole diameter: ø1.3
Dimensions in mm
0.01
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
RATINGS
DC
Rated current
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 250
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
Part No.
resistance
(Ω)max.
3.1
2
1.45
1.3
0.92
0.9
0.66
0.5
0.27
0.18
0.2
Iac
(A)max.
0.3
0.4
0.5
0.6
0.8
0.7
0.8
1
2000
HF2024-333Y0R3-201
HF2024-253Y0R4-T01
HF2024-183Y0R5-201
HF2024-123Y0R6-201
HF2024-123Y0R8-T01
HF2024-103Y0R7-T01
HF2024-682Y0R8-201
HF2024-622Y1R0-T01
HF2024-352Y1R3-T01
HF2024-242Y1R7-T01
HF2024-102Y2R0-T01
HF2024-601Y3R0-T01
33
25
18
12
12
10
6.8
6.2
3.5
2.4
1
100min.
50max.
–20 to +120
–20 to +85
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN")
Resistance to
1.3
1.7
2
soldering tenperature∗1
Applicable safety
standard∗2
0.6
0.06
3
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
HF2024
800pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(6/10)
Closed Magnetic Circuit Core Type HF Series
FEATURES
• This series employs two outer magnetic path limbs design with
windings on the center magnetic path limb of double-square
shaped closed magnetic circuit ferrite core to reduce leakage
flux.
• This filter uses the same closed magnetic circuit core as a
toroidal core and therefore, even at its compact size, it offers
large inductance and suppresses noise up to in high frequency
ranges.
HF2422(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
1
4
1000
683Y
453Y
333Y
253Y
100
2
21 0.5
L2
3
26max.
1
4
3
L1
10
2
203Y
103Y
ø0.8x4
Weight: 19.5g typ.
1
Recommended hole diameter: ø1.3
Dimensions in mm
452Y
392Y
332Y
242Y
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
RATINGS
DC
Rated current
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
Part No.
resistance
(Ω)max.
2.3
1.65
1.2
0.88
0.64
0.38
0.19
Iac
(A)max.
0.4
0.5
0.6
0.8
1
1.2
1.5
1.8
2
2000
HF2422-683Y0R4-T01
HF2422-453Y0R5-T01
HF2422-333Y0R6-T01
HF2422-253Y0R8-T01
HF2422-203Y1R0-T01
HF2422-103Y1R2-T01
HF2422-452Y1R5-T01
HF2422-392Y1R8-T01
HF2422-332Y2R0-T01
HF2422-242Y2R5-T01
68
45
33
25
20
10
4.5
3.9
3.3
2.4
100min.
50max.
–20 to +120
–20 to +85
0.15
0.11
0.09
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
2.5
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
HF2422
540pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(7/10)
HF2430(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY
CHARACTERISTICS
26max.
19max.
1000
683Y
453Y
333Y
253Y
100
ø0.8x4
4
1
2
1
2
4
3
L1
L2
10
13 0.5
3
Weight: 19.5g typ.
203Y
103Y
Recommended hole diameter: ø1.3
Dimensions in mm
1
452Y
392Y
332Y
242Y
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
RATINGS
DC
Rated current
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
Part No.
resistance
(Ω)max.
2.3
1.65
1.2
0.88
0.64
0.38
0.19
Iac
(A)max.
0.4
0.5
0.6
0.8
1
1.2
1.5
1.8
2
2000
HF2430-683Y0R4-T01
HF2430-453Y0R5-T01
HF2430-333Y0R6-T01
HF2430-253Y0R8-T01
HF2430-203Y1R0-T01
HF2430-103Y1R2-T01
HF2430-452Y1R5-T01
HF2430-392Y1R8-T01
HF2430-332Y2R0-T01
HF2430-242Y2R5-T01
68
45
33
25
20
10
4.5
3.9
3.3
2.4
100min.
50max.
–20 to +120
–20 to +85
0.15
0.11
0.09
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
2.5
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
HF2430
400pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(8/10)
HF2826(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM
TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
1
4
1000
353Y
253Y
203Y
100
10
1
2
3
24.0 0.5
30.5max.
1
2
4
3
L1
L2
802Y
ø0.8x4
Weight: 28g typ.
562Y
472Y
332Y
Recommended hole diameter: ø1.3
Dimensions in mm
182Y
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
RATINGS
DC
Rated current
Item
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
Part No.
resistance
(Ω)max.
0.78
0.56
0.41
0.27
0.18
0.13
0.1
Iac
(A)max.
1
1.2
1.5
1.8
2
2.5
2.8
3
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
2000
HF2826-353Y1R0-T01
HF2826-253Y1R2-T01
HF2826-203Y1R5-T01
HF2826-123Y1R8-T01
HF2826-802Y2R0-T01
HF2826-562Y2R5-T01
HF2826-472Y2R8-T01
HF2826-332Y3R0-T01
HF2826-182Y4R0-T01
35
25
20
12
8
5.6
4.7
3.3
1.8
100min.
50max.
–20 to +120
–20 to +85
0.088
0.05
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
4
soldering tenperature∗1
Applicable safety
standard∗2
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
HF2826
480pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(9/10)
HF2836(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
30.5max.
22max.
1000
353Y
253Y
100
203Y
ø0.8x4
4
1
2
4
3
1
2
10
L1
L2
13 0.5
3
Weight: 30g typ.
802Y
Recommended hole diameter: ø1.2 to 1.3
Dimensions in mm
562Y
1
472Y
332Y
182Y
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
RATINGS
DC
Rated current
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
Part No.
resistance
(Ω)max.
0.78
0.56
0.41
0.27
0.18
0.13
0.1
Iac
(A)max.
1
1.2
1.5
1.8
2
2.5
2.8
3
2000
HF2836-353Y1R0-T01
HF2836-253Y1R2-T01
HF2836-203Y1R5-T01
HF2836-123Y1R8-T01
HF2836-802Y2R0-T01
HF2836-562Y2R5-T01
HF2836-472Y2R8-T01
HF2836-332Y3R0-T01
HF2836-182Y4R0-T01
35
25
20
12
8
5.6
4.7
3.3
1.8
100min.
50max.
–20 to +120
–20 to +85
0.088
0.05
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
4
soldering tenperature∗1
Applicable safety
standard∗2
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
HF2836
800pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
(10/10)
HF3545(DOUBLE-SQUARE SHAPED CLOSED MAGNETIC CIRCUIT CORE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
37max.
26max.
1000
333Y
100
ø1.2x6
4
183Y
123Y
1
2
1
2
4
3
10
L1
Weight: 65g typ.
L2
21 0.5
3
103Y
822Y
562Y
Recommended hole diameter: ø1.7
Dimensions in mm
1
472Y
0.1
0.01
0.1
1
10
100
(
)
Frequency MHz
ELECTRICAL CHARACTERISTICS
RATINGS
DC
Rated current
Item
Rated voltage(V)
Dielectric withstanding
voltage(V)
Insulation resistance
(MΩ)
Temperature rise(°C)
Operating temperature
range(°C)
Storage temperature
range(°C)
Standard value
80 to 280
Conditions
50Hz/60Hz
Between each winding for
1 minute
Between each winding for
DC.500V
With line resistance
Including self-temperature
rise
Inductance
(mH)min.
Part No.
resistance
(Ω)max.
0.42
0.29
0.23
0.21
0.17
0.13
Iac
(A)max.
1.5
1.8
2
2.2
2.5
2.7
3
2000
HF3545-333Y1R5-T01
HF3545-223Y1R8-T01
HF3545-183Y2R0-T01
HF3545-153Y2R2-T01
HF3545-123Y2R5-T01
HF3545-103Y2R7-T01
HF3545-822Y3R0-T01
HF3545-562Y3R5-T01
HF3545-472Y4R0-T01
33
22
18
15
12
10
8.2
5.6
4.7
100min.
50max.
–20 to +120
0.105
0.077
0.062
–20 to +85
3.5
4
260 5°C, 10 1sec Solder bath method
350 5°C, 5sec max. Soldering iron method
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
Resistance to
soldering tenperature∗1
Applicable safety
standard∗2
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
PACKAGING QUANTITIES
HF3545
140pieces/box
• All specifications are subject to change without notice.
001-02 / 20101125 / e93_hf.
相关型号：
HF2318-A322Y2R0-01
Common Mode Choke Coils Line Filters For power line, Closed magnetic circuit core type
TDK
HF2318-A503Y0R5-01
Common Mode Choke Coils Line Filters For power line, Closed magnetic circuit core type
TDK
HF2318-A633Y0R4-01
Common Mode Choke Coils Line Filters For power line, Closed magnetic circuit core type
TDK
HF2318-A752Y1R5-01
Common Mode Choke Coils Line Filters For power line, Closed magnetic circuit core type
TDK
©2020 ICPDF网 联系我们和版权申明