CEU3E2X7R1H223M080AE [TDK]
CAP CER 0.022UF 50V X7R 0603;型号: | CEU3E2X7R1H223M080AE |
厂家: | TDK ELECTRONICS |
描述: | CAP CER 0.022UF 50V X7R 0603 |
文件: | 总6页 (文件大小:182K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MULTILAYER CERAMIC CHIP CAPACITORS
April 2019
MULTILAYER CERAMIC CHIP CAPACITORS
Automotive grade, serial design ꢀ
CEUseries
CEU3 1608 [0603 inch]
CEU4 2012 [0805 inch]
* Dimensions code: JIS[EIA]
(2/6)
MULTILAYER CERAMIC CHIP CAPACITORS
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
1. The products listed in this specification are intended for use in automotive applications under normal operation and usage conditions.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality
requires a more stringent level of safety or reliability, or whose failure, malfunction or defect could cause serious damage to society, person or
property.
Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applications below or for
any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed
below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us.
(1) Aerospace/aviation equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(2) Transportation equipment (electric trains, ships, etc.)
(3) Medical equipment (excepting Pharmaceutical Affairs Law clas-
sification Class1,2)
(4) Power-generation control equipment
(13) Other applications that are not considered general-purpose
applications
(5) Atomic energy-related equipmentꢀꢀ
(6) Seabed equipment
(7) Transportation control equipment
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing protection
circuit/device or providing backup circuits in your equipment.
In addition, although the products listed in this specification are intended for use in automotive applications as described above, they are not
prohibited to use in general electronic equipment, whose performance and/or quality doesn’t require a more stringent level of safety or reliability,
or whose failure, malfunction or defect could not cause serious damage to society, person or property. Therefore, the description of this caution
will be applied, when the products are used in general electronic equipment under a normal operation and usage conditions.
2. We may modify products or discontinue production of a product listed in this catalog without prior notification.
3. We provide “Delivery Specification” that explain precautions for the specifications and safety of each product listed in this catalog. We strongly
recommend that you exchange these delivery specifications with customers that use one of these products.
4. If you plan to export a product listed in this catalog, keep in mind that it may be a restricted item according to the “Foreign Exchange and For-
eign Trade Control Law”. In such cases, it is necessary to acquire export permission in harmony with this law.
5. Any reproduction or transferring of the contents of this catalog is prohibited without prior permission from our company.
6. We are not responsible for problems that occur related to the intellectual property rights or other rights of our company or a third party when you
use a product listed in this catalog. We do not grant license of these rights.
7. This catalog only applies to products purchased through our company or one of our company’s official agencies. This catalog does not apply to
products that are purchased through other third parties.
Notice: Effective January 2013, TDK will use a new catalog number which adds product thickness and packaging specification detail.
This new catalog number should be referenced on all catalog orders going forward, and is not applicable for OEM part number
orders.
Please be aware the last five digits of the catalog number will differ from the item description (internal control number) on the
product label.
Contact your local TDK Sales representative for more information.
(Example)
Catalog issued date
Prior to January 2013
Catalog number
C1608C0G1E103J(080AA)
Item description (on delivery label)
C1608C0G1E103JT000N
January 2013 and later C1608C0G1E103J080AA
C1608C0G1E103JT000N
20190402 / mlcc_automotive_serial_en.
(3/6)
MULTILAYER CERAMIC CHIP CAPACITORS
Cl
Br
CEU series
Pb
REACH Halogen
Free
Lead
Free
RoHS
SVHC-Free
Serial design
Type: CEU3/1608 [0603 inch], CEU4/2012 [0805 inch]
■SERIES OVERVIEW
Serial design CEU series, automotive grade of TDK's multilayer ceramic chip capacitor, is a product which has two capacitors in series in single
body construction. The structure decreases risk of short circuit failures due to mechanical flex cracks. Additionally, CEU series has higher mechani-
cal endurance by flexible resin layers which absorbs thermal and mechanical stress. The capacitance range is up to 100nF.
■FEATURES
■APPLICATIONS
• Fail-safe design in battery line.
• For circuits requiring safer design
• Serial structure decreases risk of short circuit failures due to mechani-
cal flex cracks.
• Higher mechanical endurance is realized by flexible resin layers.
• AEC-Q200 compliant.
■SHAPE & DIMENSIONS
W
■PRODUCT STRUCTURE
General
Serial design
L
T
Sn
Ni
G
Conductive resin layer
Cu
B
L
W
T
Body length
Body width
Body height
A general structure which
opposite inner electrodes are
alternately stacked.
A product which has two capacitors in series
in single body construction and flexible resin
layer.
B
G
Terminal width
Terminal spacing
Dimensions in mm
Type
L
W
T
B
G
CEU3
CEU4
1.60+0.20,–0.10
2.00+0.30,–0.20
0.80+0.15,–0.10
1.25+0.25,–0.20
0.80+0.15,–0.10
1.25+0.25,–0.20
0.20min.
0.20min.
0.30min.
0.50min.
Dimensional tolerances are typical values.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190402 / mlcc_automotive_serial_en.
(4/6)
MULTILAYER CERAMIC CHIP CAPACITORS
■CATALOG NUMBER CONSTRUCTION
CEU
(1)
4
(2)
J
(3)
2
(4)
X7R 1H
104
(7)
K
(8)
125
(9)
A
(10)
E
(11)
(5)
(6)
(1) Series
(7) Nominal capacitance (pF)
The capacitance is expressed in three digit codes and in units of
pico Farads (pF). The first and second digits identify the first and
second significant figures of the capacitance. The third digit identi-
fies the multiplier. R designates a decimal point.
(2) Dimensions L x W (mm)
Code
3
4
EIA
CC0603
CC0805
Length
1.60
Width
0.80
1.25
Terminal width
0.20
0.20
2.00
(Example)0R5 = 0.5pF
101 = 100pF
(3) Thickness code
225 = 2,200,000pF = 2.2µF
Code
Thickness
E
J
0.80 mm
1.25 mm
(8) Capacitance tolerance
Code
K
M
Tolerance
10%
20%
(4) Voltage condition for life test
Symbol
2
Condition
2 × R.V.
(9) Thickness
Code
080
125
Thickness
0.80 mm
1.25 mm
(5) Temperature characteristics
Temperature
Capacitance change
characteristics
Temperature range
–55 to +125°C
X7R
15%
(10) Packaging style
Code
A
Style
(6) Rated voltage (DC)
178mm reel, 4mm pitch
Code
1H
2A
Voltage (DC)
50V
100V
(11) Special reserved code
Code
E
Description
Soft termination
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190402 / mlcc_automotive_serial_en.
(5/6)
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range chart
CEU3/1608 [0603 inch]
Capacitance
(pF) Code
X7R
2A
1H
(100V) (50V)
1,000
1,500
2,200
3,300
4,700
6,800
10,000
15,000
22,000
33,000
47,000
102
152
222
332
472
682
103
153
223
333
473
Standard thicknessꢀ
0.80mm
Background gray: The product which is not recommended to a new design.
■ Please refer to the capacitance range table at P-6 for the details such as product thickness and capacitance tolerance.
Capacitance range chart
CEU4/2012 [0805 inch]
Capacitance
(pF) Code
X7R
2A
1H
(100V) (50V)
1,000
1,500
2,200
3,300
4,700
6,800
10,000
15,000
22,000
33,000
47,000
68,000
100,000
102
152
222
332
472
682
103
153
223
333
473
683
104
Standard thicknessꢀ
1.25 mm
Background gray: The product which is not recommended to a new design.
■ Please refer to the capacitance range table at P-6 for the details such as product thickness and capacitance tolerance.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190402 / mlcc_automotive_serial_en.
(6/6)
MULTILAYER CERAMIC CHIP CAPACITORS
Capacitance range table
Temperature characteristics: X7R (–55 to +125°C, 15ꢀ)
Catalog number
Thickness
(mm)
Capacitance
tolerance
Capacitance Dimensions
Rated voltage Edc: 100V
CEU3E2X7R2A102K080AE
CEU3E2X7R2A102M080AE
CEU4J2X7R2A102K125AE
CEU4J2X7R2A102M125AE
CEU3E2X7R2A152K080AE
CEU3E2X7R2A152M080AE
CEU4J2X7R2A152K125AE
CEU4J2X7R2A152M125AE
CEU3E2X7R2A222K080AE
CEU3E2X7R2A222M080AE
CEU4J2X7R2A222K125AE
CEU4J2X7R2A222M125AE
CEU3E2X7R2A332K080AE
CEU3E2X7R2A332M080AE
CEU4J2X7R2A332K125AE
CEU4J2X7R2A332M125AE
Rated voltage Edc: 50V
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
10%
20%
1608
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
0.80+0.15,-0.10
1.25+0.25,-0.20
1.25+0.25,-0.20
1.25+0.25,-0.20
1nF
2012
1608
1.5nF
2012
1608
2.2nF
2012
1608
3.3nF
2012
CEU3E2X7R1H472K080AE
CEU3E2X7R1H472M080AE
1608
4.7nF
2012
CEU4J2X7R2A472K125AE
CEU4J2X7R2A472M125AE
CEU3E2X7R1H682K080AE
CEU3E2X7R1H682M080AE
1608
6.8nF
2012
CEU4J2X7R2A682K125AE
CEU4J2X7R2A682M125AE
CEU3E2X7R1H103K080AE
CEU3E2X7R1H103M080AE
1608
10nF
2012
CEU4J2X7R2A103K125AE
CEU4J2X7R2A103M125AE
CEU3E2X7R1H153K080AE
CEU3E2X7R1H153M080AE
1608
15nF
2012
CEU4J2X7R2A153K125AE
CEU4J2X7R2A153M125AE
CEU3E2X7R1H223K080AE
CEU3E2X7R1H223M080AE
CEU4J2X7R1H223K125AE
CEU4J2X7R1H223M125AE
CEU3E2X7R1H333K080AE
CEU3E2X7R1H333M080AE
CEU4J2X7R1H333K125AE
CEU4J2X7R1H333M125AE
CEU3E2X7R1H473K080AE
CEU3E2X7R1H473M080AE
CEU4J2X7R1H473K125AE
CEU4J2X7R1H473M125AE
CEU4J2X7R1H683K125AE
CEU4J2X7R1H683M125AE
CEU4J2X7R1H104K125AE
CEU4J2X7R1H104M125AE
1608
22nF
2012
1608
33nF
2012
1608
47nF
2012
68nF
2012
2012
100nF
■ Gray item: The product which is not recommended to a new design.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20190402 / mlcc_automotive_serial_en.
相关型号:
©2020 ICPDF网 联系我们和版权申明