B78108-T3121-K [TDK]
General Purpose Inductor, 0.12uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT;型号: | B78108-T3121-K |
厂家: | TDK ELECTRONICS |
描述: | General Purpose Inductor, 0.12uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT |
文件: | 总9页 (文件大小:646K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Inductors
RF chokes, MCC series
Series/Type: B78108T*, B78148T*
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
Date of Withdrawal Deadline Last
Orders
Last Shipments
B78108T3*/B78148T3*
2012-10-19
2013-01-31
2013-04-30
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a
suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
RF chokes
B78108T, B78148T
MCC series, 3.3 x 7 (mm)
MCC choke (Mini Cylinder Core)
Rated inductance 0.1 ... 100 μH
Rated current 85 ... 1120 mA
Construction
■ Ceramic or ferrite cylinder core
■ Winding: enamel copper wire
■ Flame-retardant lacquer coating
B78108T
Features
■ Low total height
■ Low inductance
■ High resonance frequency
■ Suitable for wave soldering
■ RoHS-compatible
Applications
B78148T
■ RF blocking
■ Decoupling and interference suppression
■ For antenna systems, automotive electronics,
telecommunications, entertainment electronics
Terminals
■ Central axial leads (B78108T)
■ Radially bent to 5 mm lead spacing (B78148T)
■ B781 T3:
*
– Base material Staku 30/copper-clad steel 30
– Hot-dipped and electro-plated with pure tin
■ B781 T1:
*
– Base material CuAg0.1
– Electroplated with nickel and pure tin
Marking
Inductance indicated by color bands to IEC 60062
Delivery mode and packing units
■ Taped, Ammo and reel packing
■ Packing units:
Ammo
(pcs./pack.)
Reel
(pcs./reel)
Axial
5000
2500
5000
2000
Radial
Please read Cautions and warnings and
Important notes at the end of this document.
2
06/12
RF chokes
B78108T, B78148T
MCC series, 3.3 x 7 (mm)
Dimensional drawings
B78108T (axial leads, taped)
Dimensions in mm
65 1
53 2
7 max.
(IEC 60294)
6 0.5
3.5 min.
9.8 max.
lacquered
Minimum lead spacing 10 mm
IND0427-U-E
B78148T (central radial leads, taped)
ø3.3 max.
1.3 max.
1.3 max.
insulated
2 max.
2 max.
0.6 max.
Thickness of tape
5+0.6
IND0629-B
_0.1
3.8 0.7
4 0.2
12.7 0.3
IND0630-V-E
Packing
30
H
L
Label
30
n
w
IND0631-B-E
IND0452-V-E
W
n (mm): Axial 72 +1, radial 42 +1
L u W u H (max. mm):
w (mm): Axial 84 max., radial 54 max.
Axial: 310 u 75 u 120, radial: 340 u 50 u 210
Please read Cautions and warnings and
Important notes at the end of this document.
3
06/12
RF chokes
B78108T, B78148T
MCC series, 3.3 x 7 (mm)
Technical data and measuring conditions
Rated inductance LR
Measured with LCR meter Agilent 4284A
or impedance analyzer Agilent 4294A
Measuring frequency:
LRꢀd 10 PH
=
1 MHz
10 PH < LR d 4700 PH = 100 kHz
d 1 mA
Measuring current:
Measuring temperature: +20 °C
Q factor Qmin
Measured with precision impedance analyzer Agilent 4294A,
+20 °C
Rated temperature TR
Rated current IR
+40 qC
Maximum permissible DC current at rated temperature
dꢀ10% (referred to initial value) at IR, +20 qC
Measured at +20 qC
Inductance decrease 'L/L0
DC resistance Rmax
Resonance frequency fres,min Measured with Agilent 4294A or 8753ES, +20 °C
Solderability (lead-free)
Sn95.5Ag3.8Cu0.7: +(245 r5) °C, (3 r0.3) s
Wetting of soldering area tꢀ90%
(to IEC 60068-2-20, test Ta)
Resistance to soldering heat +(260 r5) °C, 10 s (to IEC 60068-2-20, test Tb)
Tensile strength of leads
Climatic category
tꢀ20 N (to IEC 60068-2-21, test Ua)
55/125/56 (to IEC 60068-1)
Storage conditions
Mounted: –55 °C … +125 °C
Packaged: –25 °C … +40 °C, dꢀ75% RH
Weight
Approx. 0.25 g
Mounting information
When bending the leads, take care that the start-of-winding areas at the face ends (protected by
glue and lacquer) are not subjected to any mechanical stress.
Please read Cautions and warnings and
Important notes at the end of this document.
4
06/12
RF chokes
B78108T, B78148T
MCC series, 3.3 x 7 (mm)
Characteristics and ordering codes
LR
Tolerance1) Qmin
fQ
IR
Rmax
fres,min
MHz
Ordering code2)
(reel packing)3)
PH
MHz
mA
:
Ceramic cylinder core
^
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
r10% K
40
40
38
35
35
35
35
35
35
35
35
35
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
25.2
1120
1080
1020
1000
990
0.13
600
570
500
460
420
380
330
300
280
260
240
230
B781 8T3101K000
*
0.145
0.155
0.17
B781 8T3121K000
*
B781 8T3151K000
*
B781 8T3181K000
*
0.195
0.215
0.24
B781 8T3221K000
*
910
B781 8T3271K000
*
830
B781 8T3331K000
*
790
0.27
B781 8T3391K000
*
750
0.315
0.34
B781 8T3471K000
*
700
B781 8T3561K000
*
530
0.48
B781 8T3681K000
*
500
0.55
B781 8T3821K000
*
1) Closer tolerances on request.
2) Replace the by code number »0« for axial taping or by »4« for radial taping.
*
3) For Ammo pack the last digit has to be a »9«. Example: B78108T3101K009
Please read Cautions and warnings and
Important notes at the end of this document.
5
06/12
RF chokes
B78108T, B78148T
MCC series, 3.3 x 7 (mm)
Characteristics and ordering codes
LR
Tolerance1) Qmin
fQ
IR
Rmax
fres,min
MHz
Ordering code2)
(reel packing)3)
PH
MHz
mA
:
Ferrite cylinder core
^
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
5.6
6.8
8.2
r10% K
35
40
40
40
40
40
40
40
40
45
45
50
50
55
55
55
60
60
60
60
60
60
60
60
60
25.2
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
7.96
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
2.52
630
610
570
540
520
480
420
400
380
260
250
240
230
190
185
175
170
160
150
140
100
100
95
0.25
0.25
0.30
0.30
0.35
0.40
0.50
0.55
0.65
1.30
1.45
1.60
1.70
2.40
2.70
2.90
3.20
3.60
4.10
4.50
8.50
8.80
10.0
11.5
12.5
180
170
150
130
120
110
110
100
90
B781 8T1102K000
*
B781 8T1122K000
*
B781 8T1152K000
*
B781 8T1182K000
*
B781 8T1222K000
*
B781 8T1272K000
*
B781 8T1332K000
*
B781 8T1392K000
*
B781 8T1472K000
*
75
B781 8T1562K000
*
70
B781 8T1682K000
*
65
B781 8T1822K000
*
10
60
B781 8T1103K000
*
12
15
18
22
27
33
39
47
56
68
82
100
50
B781 8T1123K000
*
45
B781 8T1153K000
*
40
B781 8T1183K000
*
30
B781 8T1223K000
*
27
B781 8T1273K000
*
24
B781 8T1333K000
*
22
B781 8T1393K000
*
20
B781 8T1473K000
*
18
B781 8T1563K000
*
15
B781 8T1683K000
*
90
14
B781 8T1823K000
*
85
11
B781 8T1104K000
*
1) Closer tolerances on request.
2) Replace the by code number »0« for axial taping or by »4« for radial taping.
*
3) For Ammo pack the last digit has to be a »9«. Example: B78108T3101K009
Please read Cautions and warnings and
Important notes at the end of this document.
6
06/12
RF chokes
B78108T, B78148T
MCC series, 3.3 x 7 (mm)
Impedance |Z| versus frequency f
Inductance L versus DC load current IDC
measured with LCR meter Agilent 4284A,
typical values at +20 °C
measured with impedance analyzer Agilent
4294A or S-parameter network analyzer
Agilent 8753ES, typical values at +20 °C
IND0113-B
IND0112-N
103
106
Ω
B781*8T
B781*8T
μH
L
100 μH
10 μH
|Z|
105
102
101
104
103
102
1 μH
100
0.1 μH
1 μH
0.1 μH
_1
10
101
10 μH
100 μH
_2
100
106
10
_2
_1
100
A
101
107
108
Hz 109
f
10
10
IDC
Q factor versus frequency f
measured with impedance analyzer
Agilent 4294A, typical values at +20 °C
Current derating Iop/IR
versus ambient temperature TA
(rated temperature TR = +40 qC)
IND0114-H
IND0552-S-E
1.2
Iop
100
50
0
B781*8T
IR
Q
1.0
0.8
0.6
0.4
0.2
0
0.1 μH
1 μH
10 μH
100 μH
104
105
106
107 Hz 108
f
0
20
40
60
80 100
C 140
˚
TA
7
06/12
Cautions and warnings
■ Please note the recommendations in our Inductors data book (latest edition) and in the data
sheets.
– Particular attention should be paid to the derating curves given there.
– The soldering conditions should also be observed. Temperatures quoted in relation to wave
soldering refer to the pin, not the housing.
■ If the components are to be washed varnished it is necessary to check whether the washing
varnish agent that is used has a negative effect on the wire insulation, any plastics that are used,
or on glued joints. In particular, it is possible for washing varnish agent residues to have a
negative effect in the long-term on wire insulation.
Washing processes may damage the product due to the possible static or cyclic mechanical
loads (e.g. ultrasonic cleaning). They may cause cracks to develop on the product and its parts,
which might lead to reduced reliability or lifetime.
■ The following points must be observed if the components are potted in customer applications:
– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic
housing or core. This pressure can have a deleterious effect on electrical properties, and in
extreme cases can damage the core or plastic housing mechanically.
– It is necessary to check whether the potting material used attacks or destroys the wire
insulation, plastics or glue.
– The effect of the potting material can change the high-frequency behaviour of the components.
■ Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to
breakage of the core.
■ Even for customer-specific products, conclusive validation of the component in the circuit can
only be carried out by the customer.
Please read Cautions and warnings and
Important notes at the end of this document.
8
06/12
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As
a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of an electronic component could endanger human life or health (e.g.
in accident prevention or life-saving systems), it must therefore be ensured by means of suitable
design of the customer application or other action taken by the customer (e.g. installation of
protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products.
Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version
of the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,
DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap
are trademarks registered or pending in Europe and in other countries. Further information will
be found on the Internet at www.epcos.com/trademarks.
9
06/12
相关型号:
B78108-T3121-K9
General Purpose Inductor, 0.12uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
EPCOS
B78108-T3151-K
General Purpose Inductor, 0.15uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
TDK
B78108-T3151-K9
General Purpose Inductor, 0.15uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
TDK
B78108-T3181-K
General Purpose Inductor, 0.18uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
EPCOS
B78108-T3181-K9
General Purpose Inductor, 0.18uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
EPCOS
B78108-T3221-K9
General Purpose Inductor, 0.22uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
TDK
B78108-T3271-K9
General Purpose Inductor, 0.27uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
EPCOS
B78108-T3331-K
General Purpose Inductor, 0.33uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
EPCOS
B78108-T3331-K9
General Purpose Inductor, 0.33uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
TDK
B78108-T3391-K
General Purpose Inductor, 0.39uH, 10%, 1 Element, Ceramic-Core, AXIAL LEADED, ROHS COMPLIANT
TDK
©2020 ICPDF网 联系我们和版权申明