B39362-X7261-X400 [TDK]

SAW Filter, 1 Function(s), 36.22MHz,;
B39362-X7261-X400
型号: B39362-X7261-X400
厂家: TDK ELECTRONICS    TDK ELECTRONICS
描述:

SAW Filter, 1 Function(s), 36.22MHz,

LTE
文件: 总11页 (文件大小:141K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SAW multimedia filters  
Series/Type: X7261X  
The following products presented in this data sheet are being withdrawn.  
Ordering Code  
Substitute Product  
Date of Withdrawal Deadline Last  
Orders  
Last Shipments  
2012-09-30  
B39362X7261X400  
2011-01-14  
2011-09-30  
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a  
suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.  
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information  
contained therein without EPCOS' prior express consent is prohibited.  
EPCOS AG is a TDK Group Company.  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
Application  
IF filter for digital TV  
Switchable between usable bandwidths 8.0MHz and  
7.0MHz  
Constant group delay  
Features  
Duroplast ackage SIP5D  
Standard IC package  
Approximate weight 0.5 g  
RoHS compatible  
Tinned CuFe alloy terminals  
Pin configuration  
1
4
5
1  
2  
3  
4  
5  
Input  
Switching input  
Chip carrier - ground  
Output  
2
Output  
3
Please read cautions and warnings and  
important notes at the end of this document.  
2
July 09, 2008  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
Characteristics of channel 1 (switching pin 2 connected to ground)  
Reference temperature:  
Terminating source impedance:  
Terminating load impedance:  
TA = 25 (45) ˚C  
ZS = 50 Ω  
ZL = 2 k|| 3 pF  
min.  
typ.  
@ 25 ˚C  
36.22  
max.  
Center frequency  
(center between 10 dB points)  
fC  
MHz  
dB  
Insertion attenuation  
Reference level for  
the following data  
α
36.22 (36.17) MHz  
21.1  
22.6  
24.1  
Pass bandwidth  
αrel < 1.5 dB  
αrel < 3 dB  
αrel < 15 dB  
αrel < 30 dB  
B1.5dB  
B3dB  
B15dB  
B30dB  
7.5  
7.9  
9.0  
9.7  
MHz  
MHz  
MHz  
MHz  
Relative attenuation  
αrel  
32.22 (32.17) MHz  
32.72 (32.67) MHz  
39.72 (39.67) MHz  
40.22 (40.17) MHz  
3.2  
0.3  
0.7  
4.3  
dB  
dB  
dB  
dB  
Lower sidelobe  
25.05 ... 31.20 (25.00 ...31.15) MHz  
Upper sidelobe  
30.0  
36.0  
dB  
41.20 ... 42.05 (41.15 ...42.00) MHz  
42.05 ... 45.05 (42.00 ...45.00) MHz  
34.0  
32.0  
40.0  
37.0  
dB  
dB  
Reflected wave signal suppression  
1.3 µs ... 6.0 µs after main pulse  
(test pulse 250 ns,  
36.0  
46.0  
70  
dB  
ns  
carrier frequency 36.22 MHz)  
Group delay ripple (p-p)  
32.20 ... 40.20 (32.15 ...40.15) MHz  
Impedance at 36.22 MHz  
∆τ  
Input: ZIN = RIN || CIN  
Output: ZOUT = ROUT || COUT  
3.2 || 10.9  
4.4 || 2.9  
k|| pF  
k|| pF  
Temperature coefficient of frequency TCf  
–72  
ppm/K  
Please read cautions and warnings and  
important notes at the end of this document.  
3
July 09, 2008  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
Characteristics of channel 2 (switching pin 2 connected to pin 1)  
Reference temperature:  
Terminating source impedance:  
Terminating load impedance:  
TA = 25 (45) ˚C  
ZS = 50 Ω  
ZL = 2 k|| 3 pF  
min.  
typ.  
@ 25 ˚C  
36.22  
max.  
Center frequency  
(center between 10 dB points)  
fC  
MHz  
dB  
Insertion attenuation  
Reference level for  
the following data  
α
36.22 (36.17) MHz  
19.7  
21.2  
22.7  
Pass bandwidth  
αrel < 1.5 dB  
αrel < 3 dB  
αrel < 15 dB  
αrel < 30 dB  
B1.5dB  
B3dB  
B15dB  
B30dB  
6.5  
6.8  
8.0  
8.5  
MHz  
MHz  
MHz  
MHz  
Relative attenuation  
αrel  
32.72 (32.67) MHz  
33.39 (33.34) MHz  
39.05 (39.00) MHz  
39.62 (39.57) MHz  
3.2  
0.0  
0.0  
4.0  
dB  
dB  
dB  
dB  
Lower sidelobe  
25.05 ... 31.70 (25.00 ...31.65) MHz  
Upper sidelobe  
28.0  
33.0  
dB  
40.80 ... 42.55 (40.75 ...42.50) MHz  
42.55 ... 45.05 (42.55 ...45.00) MHz  
28.0  
30.0  
34.0  
36.0  
dB  
dB  
Reflected wave signal suppression  
1.3 µs ... 6.0 µs after main pulse  
(test pulse 250 ns,  
48.0  
60  
dB  
ns  
carrier frequency 36.22 MHz)  
Group delay ripple (p-p)  
32.82 ... 39.72 (32.67 ...39.67) MHz  
Impedance at 36.22 MHz  
∆τ  
Input: ZIN = RIN || CIN  
Output: ZOUT = ROUT || COUT  
1.9 || 14.3  
4.4 || 2.9  
k|| pF  
k|| pF  
Temperature coefficient of frequency TCf  
–72  
ppm/K  
Please read cautions and warnings and  
important notes at the end of this document.  
4
July 09, 2008  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
Maximum ratings  
Operable temperature range T  
Storage temperature range Tstg  
–25 / +65 ˚C  
–40 / +85 ˚C  
DC voltage  
AC voltage  
VDC  
Vpp  
5
V
V
between any terminals  
between any terminals  
10  
Please read cautions and warnings and  
important notes at the end of this document.  
5
July 09, 2008  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
Frequency response of channel 1  
Please read cautions and warnings and  
important notes at the end of this document.  
6
July 09, 2008  
SAW Components  
X 7261 X  
SAW bandpass filter  
36.17 MHz  
Data Sheet  
Frequency response of channel 1  
Time domain response of channel 1  
Please read cautions and warnings and  
important notes at the end of this document.  
7
July 09, 2008  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
Frequency response of channel 2  
Please read cautions and warnings and  
important notes at the end of this document.  
8
July 09, 2008  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
Frequency response of channel 2  
Time domain response of channel 2  
Please read cautions and warnings and  
important notes at the end of this document.  
9
July 09, 2008  
SAW Components  
SAW bandpass filter  
Data Sheet  
X 7261 X  
36.17 MHz  
References  
Type  
X 7261 X  
Ordering code  
Marking and package  
Packaging  
B39362-X7261-X400  
C61157-A1-A22  
F61074-V8049-Z000  
L_1126  
Date codes  
S-parameters  
Soldering profile  
RoHS compatible  
X7261X_NB.s4p  
S_6001  
defined as compatible with the following documents:  
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT  
AND OF THE COUNCIL of 27 January 2003 on the restriction  
of the use of certain hazardous substances in electrical and  
electronic equipment. 2005/618/EC from April 18th, 2005,  
amending Directive 2002/95/EC of the European Parliament  
and of the Council for the purposes of establishing the maxi-  
mum concentration values for certain hazardous substances in  
electrical and electronic equipment."  
For further information please contact your local EPCOS sales office or visit our webpage at  
www.epcos.com .  
Published by EPCOS AG  
Surface Acoustic Wave Components Division  
P.O. Box 80 17 09, 81617 Munich, GERMANY  
EPCOS AG 2008. This brochure replaces the previous edition.  
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or  
the international Representatives.  
Due to technical requirements components may contain dangerous substances. For information on  
the type in question please also contact one of our Sales Offices.  
Please read cautions and warnings and  
important notes at the end of this document.  
10 July 09, 2008  
Important notes  
The following applies to all products named in this publication:  
1. Some parts of this publication contain statements about the suitability of our products for  
certain areas of application. These statements are based on our knowledge of typical  
requirements that are often placed on our products in the areas of application concerned. We  
nevertheless expressly point out that such statements cannot be regarded as binding  
statements about the suitability of our products for a particular customer application.  
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar  
with them than the customers themselves. For these reasons, it is always ultimately incum-  
bent on the customer to check and decide whether an EPCOS product with the properties  
described in the product specification is suitable for use in a particular customer application.  
2. We also point out that in individual cases, a malfunction of electronic components or  
failure before the end of their usual service life cannot be completely ruled out in the  
current state of the art, even if they are operated as specified. In customer applications  
requiring a very high level of operational safety and especially in customer applications in  
which the malfunction or failure of an electronic component could endanger human life or  
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by  
means of suitable design of the customer application or other action taken by the customer  
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained  
by third parties in the event of malfunction or failure of an electronic component.  
3. The warnings, cautions and product-specific notes must be observed.  
4. In order to satisfy certain technical requirements, some of the products described in this  
publication may contain substances subject to restrictions in certain jurisdictions (e.g.  
because they are classed as hazardous). Useful information on this will be found in our  
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more  
detailed questions, please contact our sales offices.  
5. We constantly strive to improve our products. Consequently, the products described in this  
publication may change from time to time. The same is true of the corresponding product  
specifications. Please check therefore to what extent product descriptions and specifications  
contained in this publication are still applicable before or when you place an order.  
We also reserve the right to discontinue production and delivery of products. Conse-  
quently, we cannot guarantee that all products named in this publication will always be avail-  
able. The aforementioned does not apply in the case of individual agreements deviating from  
the foregoing for customer-specific products.  
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-  
sion of the “General Terms of Delivery for Products and Services in the Electrical  
Industry” published by the German Electrical and Electronics Industry Association  
(ZVEI).  
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, CTVS, DSSP, MiniBlue, MKK,  
MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIM-  
DAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks reg-  
istered or pending in Europe and in other countries. Further information will be found on the  
Internet at www.epcos.com/trademarks.  
11 July 09, 2008  

相关型号:

B39371-B3643-Z710

SAW Components Low-loss Filter 371,0 MHz
EPCOS

B39371-B3677-U310

Low-Loss Filter
EPCOS

B39371-B5025-Z810

SAW Components Low-Loss Filter 374,0 MHz
EPCOS

B39371B5188Z810

SAW Filter, 1 Function(s), 367.5MHz, ROHS COMPLIANT, QCC8B, SMD, 8 PIN
TDK
EPCOS

B39376-X6768-N201

SAW Filter, 1 Function(s), 37.67MHz, 5 Pin(s), Plastic,
TDK

B39376-X6768-N201

SAW Filter, 1 Function(s), 37.67MHz, ROHS COMPLIANT, SIP5D, 5 PIN
EPCOS

B39380-K2958-M100

SAW-Video/Sound Filter, 1 Function(s), 36.5MHz, 5 Pin(s), Plastic, PLASTIC, SIP-5
EPCOS

B39380-K2959-M100

IF Filter for Intercarrier Applications 38,00 MHz
EPCOS

B39380-K2965-M100

SAW-Video/Sound Filter, 1 Function(s), 38MHz, 5 Pin(s), Plastic, PLASTIC, SIP5K-5
EPCOS

B39380-K2973-M100

SAW-Video/Sound Filter, 1 Function(s), 36.5MHz, 5 Pin(s), Plastic, PLASTIC, SIP-5
EPCOS

B39380-K2983-M100

SAW Filter, 5 Pin(s), Plastic
TDK