B39361-X6778-M100 [TDK]
SAW Filter, 1 Function(s), 36.18MHz, 5 Pin(s), Plastic, ROHS COMPLIANT, PLASTIC, SIP5K, 5 PIN;
| 型号： | B39361-X6778-M100 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | SAW Filter, 1 Function(s), 36.18MHz, 5 Pin(s), Plastic, ROHS COMPLIANT, PLASTIC, SIP5K, 5 PIN LTE |
| 文件： | 总8页 (文件大小：85K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW bandpass filter
Bandpass Filter for terrestial TV Applications
Series/type:
X 6778 M
Ordering code:
B39361-X6778-M100
Date:
Version:
February 15, 2008
2.0
EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW bandpass filter
Data Sheet
X 6778 M
36.125 MHz
Application
■ IF filter for digital TV
■ Usable bandwidth 6.9 MHz
■ Balanced input option
Features
■ Plastic package SIP5K
■ Approximate weight 1.0 g
■ RoHS compatible
■ Tinned CuFe alloy terminals
Pin configuration
■ 1
■ 2
■ 3
■ 4
■ 5
Input
Input - ground
Chip carrier - ground
Output
Output
Please read cautions and warnings and
important notes at the end of this document.
2
February 15, 2008
SAW Components
SAW bandpass filter
Data Sheet
X 6778 M
36.125 MHz
Characteristics
Reference temperature:
Terminating source impedance:
Terminating load impedance:
TA = 25 (45) ˚C
ZS = 50 Ω
ZL = 2 kΩ ||3 pF
min.
typ.
max.
@ 25 ˚C
fC
Center frequency
—
36.18
—
MHz
dB
(center between 3 dB points)
Insertion attenuation
Reference level for
the following data
α
36.18 (36.13) MHz
17.5
19.0
20.5
Pass bandwith
αrel < 3.0 dB
αrel < 30.0 dB
B3dB
B30dB
—
—
6.9
8.6
—
—
MHz
MHz
Relative attenuation
αrel
33.13 (33.08) MHz
39.23 (39.17) MHz
32.68 (32.63) MHz
39.68 (39.63) MHz
—
—
—
—
0.1
0.1
3.6
3.3
—
—
—
—
dB
dB
dB
dB
Lower sidelobe
25.05 ... 31.70 (25.00 ... 31.65) MHz
Upper sidelobe
35.0
34.0
42.0
41.0
—
—
dB
dB
40.70 ... 45.05 (40.65 ... 45.00) MHz
Reflected wave signal suppression
1.1 µs ... 6.0 µs after main pulse
(test pulse 250 ns,
42.0
48.0
—
53.0
52.0
50.0
—
—
—
dB
dB
ns
carrier frequency 36.18 MHz)
Feedthrough signal suppression
1.3 µs ... 1.2 µs before main pulse
(test pulse 250 ns,
carrier frequency 36.18 MHz)
Group delay ripple (p-p)
∆τ
32.68 ... 39.68 (32.63 ... 39.63) MHz
Impedance at 36.18 MHz
Input: ZIN = RIN || CIN
Output: ZOUT = ROUT || COUT
—
—
3.3 || 9.5
3.2 || 3.5
—
—
kΩ || pF
kΩ || pF
TCf
—
–72
—
ppm/K
Temperature coefficient of frequency
Please read cautions and warnings and
important notes at the end of this document.
3
February 15, 2008
SAW Components
SAW bandpass filter
Data Sheet
X 6778 M
36.125 MHz
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
–25 / +65 ˚C
–40 / +85 ˚C
DC voltage
AC voltage
VDC
Vpp
5
V
V
between any terminals
between any terminals
10
Please read cautions and warnings and
important notes at the end of this document.
4
February 15, 2008
SAW Components
SAW bandpass filter
Data Sheet
X 6778 M
36.125 MHz
Frequency response
Please read cautions and warnings and
important notes at the end of this document.
5
February 15, 2008
SAW Components
SAW bandpass filter
Data Sheet
X 6778 M
36.125 MHz
Frequency response
Time domain response
Please read cautions and warnings and
important notes at the end of this document.
6
February 15, 2008
SAW Components
SAW bandpass filter
Data Sheet
X 6778 M
36.125 MHz
References
Type
X 6778 M
Ordering code
Marking and package
Packaging
B39361-X6778-M100
C61157-A1-A15
F61074-V8067-Z000
L_1126
Date codes
S-parameters
Soldering profile
RoHS compatible
X6778M_NB.s4p
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2008. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
February 15, 2008
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compo-
nents or failure before the end of their usual service life cannot be completely ruled
out in the current state of the art, even if they are operated as specified. In customer
applications requiring a very high level of operational safety and especially in customer appli-
cations in which the malfunction or failure of a passive electronic component could endanger
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is
sustained by third parties in the event of malfunction or failure of a passive electronic compo-
nent.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be avail-
able.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, Silver-
Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
8
February 15, 2008
相关型号：
©2020 ICPDF网 联系我们和版权申明