B39202B4480P810 [TDK]
SAW Components BAW/SAW Duplexer;
| 型号： | B39202B4480P810 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | SAW Components BAW/SAW Duplexer |
| 文件： | 总12页 (文件大小：180K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
BAW/SAW Duplexer
Automotive telematics
Series/type:
B4480
Ordering code:
B39202B4480P810
Date:
Version:
July 4, 2014
2.0
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Application
■ Low-loss BAW/SAW duplexer for
WCDMA Band II systems
■ Low insertion attenuation
■ Low amplitude ripple
■ Usable passband 60 MHz
■ Single ended to balanced transformation
in Antenna - Rx path
■ Impedance transformation 50Ω to 100Ω
in Antenna - Rx path
Features
0.43
0.33
■ Package size 2.0 * 1.6 mm2
1
2
3
■ Package height max. 0.45 mm
■ RoHS compatible
9
bottom view
■ Approx. weight 0.005 g
5
7
6
■ Package for Surface Mount Technology (SMT)
■ Ni terminals, Au-plated
0.7
■ Electrostatic Sensitive Device (ESD)
■ AEC-Q200 qualified component family (operable
temperature range –40˚C to +85˚C)
side view
2.0
6
5
7
top view
3
2
1
Pin configuration
1
3
■ 3
TX Input
■ 1, 8
■ 6
■ 2, 4, 5, 7, 9
RX Output (balanced)
Antenna
To be grounded
8
4,5,9
2,7
6
Please read cautions and warnings and
important notes at the end of this document.
2
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Characteristics
Temperature range for specification:
ANT terminating impedance:
RX terminating impedance:
TX terminating impedance:
T
ZANT
= –20 ˚C to +85 ˚C
50 Ω
=
ZRX = 100 Ω (balanced) || 10 nH
ZTX 50 Ω
=
Characteristics TX - ANT
Center frequency
min.
typ.
@ 25˚C
1880.0
max.
fC
—
—
MHz
dB
Maximum insertion attenuation
1)
@fCarrier 1852.4 ... 1907.6 MHz
αWCDMA
—
—
—
2.3
0.6
1.6
3.3
2.0
3.3
Amplitude ripple (p-p) 2)
1852.4 ... 1907.6 MHz
∆αWCDMA
dB
%
Error Vector Magnitude
EVM 3)
@fCarrier 1852.4 ... 1907.6 MHz
Input VSWR (TX port)
1850.0 ... 1910.0 MHz
Output VSWR (ANT port)
1850.0... 1910.0 MHz
—
—
1.6
1.6
2.2
2.2
Attenuation
α
100.0 ... 764.0 MHz
869.0 ... 894.0 MHz
1574.0 ... 1577.0 MHz
1577.0 ... 1680.0 MHz
30
30
35
30
33
34
40
39
—
—
—
—
dB
dB
dB
dB
1)
@fCarrier 1932.4 ... 1987.6 MHz
αWCDMA
40
49
—
dB
2110.0 ... 2155.0 MHz
2400.0 ... 2500.0 MHz
3700.0 ... 3820.0 MHz
35
25
20
41
30
24
—
—
—
dB
dB
dB
1)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6).
Over any 5 MHz
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
2)
3)
Please read cautions and warnings and
important notes at the end of this document.
3
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Characteristics
Temperature range for specification:
ANT terminating impedance:
RX terminating impedance:
TX terminating impedance:
T
ZANT
= –20 ˚C to +85 ˚C
50 Ω
=
ZRX = 100 Ω (balanced) || 10 nH
ZTX 50 Ω
=
Characteristics ANT - RX
Center frequency
min.
typ.
@ 25˚C
1960.0
max.
fC
—
—
MHz
dB
Maximum insertion attenuation
1)
@fCarrier 1932.4 ... 1987.6 MHz
αWCDMA
—
—
2.7
0.6
3.9
2.0
Amplitude ripple (p-p) 2)
1932.4 ... 1987.6 MHz
∆αWCDMA
dB
Input VSWR (ANT port)
1930.0 ... 1990.0 MHz
—
—
2.0
1.8
2.6
2.4
Output VSWR (RX port)
1930.0 ... 1990.0 MHz
Attenuation
α
100.0 ... 1852.0 MHz
@fCarrier 1852.4 ... 1907.6 MHz
30
40
40
49
—
—
dB
dB
1)
αWCDMA
2025.0 ... 2050.0 MHz
2050.0 ... 2075.0 MHz
2075.0 ... 3000.0 MHz
3000.0 ... 4000.0 MHz
10
25
30
30
28
32
36
50
—
—
—
—
dB
dB
dB
dB
1)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6).
Over any 5 MHz
2)
Please read cautions and warnings and
important notes at the end of this document.
4
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Characteristics
Temperature range for specification:
ANT terminating impedance:
RX terminating impedance:
TX terminating impedance:
T
ZANT
= –20 ˚C to +85 ˚C
50 Ω
=
ZRX = 100 Ω (balanced) || 10 nH
ZTX
=
50 Ω
Characteristics TX - RX
Isolation
min.
typ.
@ 25˚C
max.
α
1)
@fCarrier 1852.4 ... 1907.6 MHz
@fCarrier 1932.4 ... 1987.6 MHz
αWCDMA
αWCDMA
45
45
57
52
—
—
dB
dB
1)
1)
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (6).
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
–40/+85 ˚C
–40/+85 ˚C
DC voltage
VDC
0
V
Input power at Tx Port
PIN
source and load impedance 50 Ω
continuous wave
T = 55˚C, 5000 h
1850.0 ... 1910.0 MHz
elsewhere
29
10
dBm
dBm
}
Please read cautions and warnings and
important notes at the end of this document.
5
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
Sds21(f)HRRC(f – fCarrier) 2df
∫
∞
fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 2 Passband, fCarrier ranges from
1852.4 MHz (lowest Tx channel) to 1907.6 MHz (highest Tx channel)). HRRC(f) is the transfer
function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with
the following normalization:
∞
HRRC(f) 2df= 1
∫
∞
Please read cautions and warnings and
important notes at the end of this document.
6
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Frequency Response TX-ANT
Frequency Response TX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
7
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Frequency Response RX-ANT
Frequency Response RX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
8
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Frequency Response TX-RX
Please read cautions and warnings and
important notes at the end of this document.
9
July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
Return Loss
S11 TX- port
S33 RX-port
S22 ANT-port
Please read cautions and warnings and
important notes at the end of this document.
10 July 4, 2014
SAW Components
BAW/SAW Duplexer
Data sheet
B4480
1880.0 / 1960.0 MHz
References
Type
B4480
Ordering code
Marking and package
Packaging
B39202B4480P810
C61157-A8-A48
F61074-V8247-Z000
L_1126
Date codes
B4480_NB_UN.s4p, B4480_WB_UN.s4p
See file header for port/pin assignment table.
S-parameters
Soldering profile
RoHS compatible
S_6001
RoHS-compatible means that products are compatible with the
requirements according to Art. 4 (substance restrictions) of Di-
rective 2011/65/EU of the European Parliament and of the
Council of June 8th, 2011, on the restriction of the use of certain
hazardous substances in electrical and electronic equipment
("Directive") with due regard to the application of exemptions as
per Annex III of the Directive in certain cases.
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Systems, Acoustics, Waves Business Group
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2014. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
11 July 4, 2014
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CeraPlas, CSMP, CSSP,
CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,
MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,
SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, TFAP, ThermoFuse,
WindCap are trademarks registered or pending in Europe and in other countries. Further
information will be found on the Internet at www.epcos.com/trademarks.
12 July 4, 2014
相关型号：
©2020 ICPDF网 联系我们和版权申明