B39191B5026H510 [TDK]
SAW Filter, 1 Function(s), 190MHz, SMD, 10 PIN;
| 型号： | B39191B5026H510 |
| 厂家： | 
TDK ELECTRONICS |
| 描述： | SAW Filter, 1 Function(s), 190MHz, SMD, 10 PIN LTE |
| 文件： | 总7页 (文件大小：81K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW filters for infrastructure systems
Series/Type: B5026
The following products presented in this data sheet are being withdrawn.
Ordering Code
Substitute Product
Date of Withdrawal Deadline Last
Orders
Last Shipments
2011-09-30
B39191B5026H510
2011-04-01
2011-06-30
For further information please contact your nearest EPCOS sales office, which will also support you in selecting a
suitable substitute. The addresses of our worldwide sales network are presented at www.epcos.com/sales.
EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
EPCOS AG is a TDK Group Company.
SAW Components
Low-Loss Filter
Data Sheet
B5026
190.00 MHz
Application
■ Low-loss IF filter for W-CDMA base station,
receive path (Rx)
■ Unbalanced or balanced operation possible
■ High near-by selectivity
■ Temperature stable
Features
7,62
3
1,0
2
■ Package size 13.3 x 6.5 x 1.6 mm3
■ Package code DCC12A
■ RoHS compatible
1
4
5
bottom view
■ Approx. weight 0.4 g
8
7
■ Ceramic package for Surface Mount Tech-
nology (SMT)
10
9
6
3,81
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Filter surface passivated
side view
top view
13,3
Pin configuration
■ 10
■ 1
■ 5
Input
Input ground
Output
■ 6
■ 3,8
Output ground
To be grounded
■ 2,4,7,9 Case ground
Please read cautions and warnings and
important notes at the end of this document.
2
Jun 06, 2006
SAW Components
Low-Loss Filter
Data Sheet
B5026
190.00 MHz
Characteristics
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T
ZS
ZL
=
=
=
-30 to +85 ˚C
50 Ω and matching network
50 Ω and matching network
min.
—
typ.
@ 25˚C
190.0
max.
Nominal frequency
fN
—
MHz
Minimum insertion attenuation
αmin
—
12.0
15.0 dB
(including matching network)
Passband width
αrel ≤ 1 dB B1dB
αrel ≤ 30 dB B30dB
3.84
—
4.2
4.8
—
—
MHz
MHz
Amplitude ripple (p-p)
Phase ripple (rms)
fN ± 1.92 MHz ∆α
—
—
0.7
1.0
1.0 dB
fN ± 1.92 MHz ∆ϕ
1.5 ˚ rms
1698 ns
Absolute group delay
mean value within fN ± 1.92 MHz at 25 ˚C 1)
τ
1688
—
1693
2.0
Error vector magnitude
fN ± 1.92 MHz EVM
—
—
%
Adjacent channel suppression
ACS
fN ± 3.08 MHz ... fN ± 6.92 MHz
—
50
dB
Relative attenuation (relative to αmin
)
αrel
fN ± 2.515 MHz...fN ± 3.08 MHz
fN ± 3.08 MHz...fN ± 3.5 MHz
fN ± 3.5 MHz...fN ± 20 MHz
32
37
40
38
42
45
—
—
—
dB
dB
dB
Temperature coefficient of frequency 2)
Turnover temperature
TCf
T0
—
—
–0.036
20
—
—
ppm/K2
˚C
1)
At other temperatures the variation from filter to filter is also restricted to +/- 5 ns.
From -30 ... +85 ˚C the variation of mean value of group delay is restricted to +/- 10 ns.
Temperature dependance of fc: fc(TA) = fc(T0) (1 + TCf(TA – T0)2)
2)
Maximum ratings
Operable temperature range T
Storage temperature range Tstg
–40/+85
–40/+85
3
˚C
˚C
V
DC voltage
VDC
Input Power(passband)
Input Power(stopband)
PIN
PIN
10
20
dBm
dBm
fN ± 5 MHz...fN ± 70 MHz
Please read cautions and warnings and
important notes at the end of this document.
3
Jun 06, 2006
SAW Components
Low-Loss Filter
Data Sheet
B5026
190.00 MHz
Matching network to 50 Ω
Element values depend upon board layout.
Lp1 = 39 nH
Ls2 82 nH
Ls2
Ls5
=
Lp3 = 56 nH
Lp6
Lp4 = 100 nH
Lp1
Lp4
Lp3
Ls5
= 82 nH
Lp6 = 33 nH
Alternative matching network to 50 Ω
Element values depend upon board layout.
Cp1 = 68 pF
Ls2 = 39 nH
Cp3 = 2.2 pF
Cp4 = 1.8 pF
Ls5 = 56 nH
Cp6 = 56 pF
Please read cautions and warnings and
important notes at the end of this document.
4
Jun 06, 2006
SAW Components
Low-Loss Filter
Data Sheet
B5026
190.00 MHz
Transfer function
Transfer function (passband)
Please read cautions and warnings and
important notes at the end of this document.
5
Jun 06, 2006
SAW Components
Low-Loss Filter
Data Sheet
B5026
190.00 MHz
Type
B5026
Ordering code
Marking and Package
Packaging
B39191-B5026-H510
C61157-A7-A94
F61074-V8163-Z000
L_1126
Date Codes
S-Parameters
Soldering profile
S_6001
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2005. Reproduction, publication and dissemination of this brochure and the informa-
tion contained therein without EPCOS’ prior express consent is prohibited.
Purchase orders are subject to the General Conditions for the Supply of Products and Services of
the Electrical and Electronics Industry recommended by the ZVEI (German Electrical and Electronic
Manufacturers’ Association), unless otherwise agreed.
This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
6
Jun 06, 2006
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately incum-
bent on the customer to check and decide whether an EPCOS product with the properties
described in the product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic compo-
nents or failure before the end of their usual service life cannot be completely ruled
out in the current state of the art, even if they are operated as specified. In customer
applications requiring a very high level of operational safety and especially in customer appli-
cations in which the malfunction or failure of a passive electronic component could endanger
human life or health (e.g. in accident prevention or life-saving systems), it must therefore be
ensured by means of suitable design of the customer application or other action taken by the
customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is
sustained by third parties in the event of malfunction or failure of a passive electronic compo-
nent.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be avail-
able.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-
sion of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, Silver-
Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered
or pending in Europe and in other countries. Further information will be found on the Internet
at www.epcos.com/trademarks.
7
Jun 06, 2006
相关型号：
©2020 ICPDF网 联系我们和版权申明