SGP1575254C02 [TAOGLAS]
GPS/GALILEO SMT PAtch Antenna;型号: | SGP1575254C02 |
厂家: | Taoglas |
描述: | GPS/GALILEO SMT PAtch Antenna 全球定位系统 |
文件: | 总15页 (文件大小:1021K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPECIFICATION
Part No.
:
SGP.1575.25.4.C.02
Product Name
:
GPS/GALILEO SMT Patch Antenna
Features
:
25mm*25mm*4.5mm
1575MHz Centre Frequency
Patent pending
RoHS Compliant
SPE-11-8-139/E/SS
Page 1 of 15
1. Introduction
This ceramic GPS/GALILEO patch antenna is based on smart XtremeGain™
technology. It is mounted via SMT process and has been selected as optimal
solution for the 45*45mm ground plane.
2. Specification
Original Patch Specification tested on 45*45mm ground plane
No
1
Parameter
Range of Receiving
Frequency
Specification
Notes
1575.42 MHz ± 1.023 MHz
With 45*45mm ground
plane
2
Center Frequency
1575.42 ± 3MHz
3
4
5
6
7
8
9
Bandwidth
VSWR
8MHz min
1.5 max
Return Loss <-10 dB
Gain at Zenith
Gain at 10°elevation
Axial Ratio
+2.0 dBic typ.
-1.0 dBic typ.
3 dB max
RHCP
Center Frequency
Polarization
Impedance
50 Ohms
Frequency Temperature
Coefficient(τf)
10
11
0 ± 20ppm / oC
-40ºC to +85ºC
Operating Temperature
-40C to -85C
**Changes in user groundplane and environment will offset centre frequency
SPE-11-8-139/E/SS
Page 2 of 15
3. Electrical Specifications
3.1 Return Loss, SWR, Impedance, measured on the test
fixture
SPE-11-8-139/E/SS
Page 3 of 15
3.2 2D Radiation Pattern
SPE-11-8-139/E/SS
Page 4 of 15
4. Mechanical Specifications
4.1 Antenna Dimensions and Drawing
SPE-11-8-139/E/SS
Page 5 of 15
4.2 Antenna Footprint
4.2.1 Top Copper
SPE-11-8-139/E/SS
Page 6 of 15
4.2.2 Top Paste
SPE-11-8-139/E/SS
Page 7 of 15
4.2.3 Top Mask
SPE-11-8-139/E/SS
Page 8 of 15
4.2.4 Composite
SPE-11-8-139/E/SS
Page 9 of 15
4.3
Test Jig and Dimension
SPE-11-8-139/E/SS
Page 10 of 15
4.4
Test Fixture set up and measurements
SPE-11-8-139/E/SS
Page 11 of 15
5. Antenna Recommended Soldering Conditions
SGP.25C can be assembled following Pb-free assembly. According to the Standard
IPC/JEDEC J-STD-020C, the temperature profile suggested is as follow:
Phase
Profile Features
Pb-Free Assembly (SnAgCu)
PREHEAT
Temperature Min(Tsmin)
Temperature Max(Tsmax)
Time(ts) from (Tsmin to Tsmax)
150°C
200°C
60-120 seconds
RAMP-UP
REFLOW
Avg. Ramp-up Rate (Tsmax to TP) 3°C/second(max)
Temperature(TL)
Total Time above TL (tL)
Temperature(TP)
Time(tp)
217°C
30-100 seconds
260°C
PEAK
2-5 seconds
RAMP-DOWN
Rate
3°C/second(max)
8 minutes max.
96.5Sn/3Ag/0.5Cu
SHENMAO PF606-P26
Time from 25°C to Peak Temperature
Composition of solder paste
Solder Paste Model
Soldering Iron condition: Soldering iron temperature 270°C±10°C.
Apply preheating at 120°C for 2-3 minutes. Finish soldering for each terminal within 3 seconds, if soldering iron
temperature over270°C±10°C or 3 seconds, it will make cause component surface peeling or damage.
SPE-11-8-139/E/SS
Page 12 of 15
6. Packaging
SPE-11-8-139/E/SS
Page 13 of 15
Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves
the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves
all rights to this document and the information contained herein.
Reproduction, use or disclosure to third parties without express permission is strictly prohibited.
Copyright © Taoglas Ltd.
SPE-11-8-139/E/SS
Page 14 of 15
SPE-11-8-139/E/SS
Page 15 of 15
相关型号:
©2020 ICPDF网 联系我们和版权申明