LPF12011 [TAOGLAS]
Airvu 1.2GHz Low Pass Filter;型号: | LPF12011 |
厂家: | Taoglas |
描述: | Airvu 1.2GHz Low Pass Filter |
文件: | 总7页 (文件大小:394K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPECIFICATION
Part No.
: LPF.12.01
Product Name : Airvu 1.2GHz Low Pass Filter
Features
: SMA(M) Plug to SMA(F) Jack Interface
Frequency Range:300-1400 MHz
Insertion Loss: <1.1 dB
Finish: Black Ni Plated
Total Length: 39 mm
RoHS Compliant
SPE-15-8-037/A/IC
Page 1 of 7
1. Introduction
The Airvu 1.2GHz Low Pass Filter is placed on the end of the antenna port to
help eliminate or reduce radio interference problems on UAVs. It does this in
two ways
1. It reduces out of band noise entering the receiver that cause effects such
as reduction of control range
2. It reduces the antenna transmissions of out of band noise affecting other
circuitry on your UAV (such as disrupting the GPS receiver leading to loss
of fix, or a live video stream at 5.8GHz)
The LPF.12.01 internal ceramic filter has better insertion loss and stop band
performance than competing LTCC or lumped element filters, while also having
good rejection at band edges. It uses a standard SMA(M) Plug to SMA(F) Jack
interface. This filter is designed to be easily screwed onto this standard antenna
SMA connector. Custom versions can be made subject to NRE and MOQ.
Contact your regional Taoglas office for support
Note
There can still be noise issues that a filter cannot solve. Such as noise that
can be radiated directly from the transmitter board and any wiring. Also no
filter can protect from in-band noise within the assigned operating
frequency of the receiver. Always try to place noisy components as far away
from a receiver and antenna as possible.
SPE-15-8-037/A/IC
Page 2 of 7
2. Specification Table
ELECTRICAL
Pass Band Frequency
Pass Band Width
300~1400 MHz
1100 MHz
50 Ohm
Input / Output Impedance
Max. Input Power
10W
Pass Band Insertion Loss
Pass Band Ripple
1.0 dB typ.
1.0 dB max
1.1 dB max
Pass Band Return Loss
10 dB min
10 dB min
20 dB min
35 dB min
at 1565~1625 MHz
Stop-Band
at 1900~2200 MHz
at 2400~2700 MHz
Attenuation
MECHANICAL
Connector type
SMA(M) & SMA(F)
9.820g
Weight
Dimensions
39*10mm
ENVIRONMENTAL
Operating Temperature
-40°C to 85°C
SPE-15-8-037/A/IC
Page 3 of 7
3. Electrical Specifications
3.1 S21
In Band View
SPE-15-8-037/A/IC
Page 4 of 7
Wide Band View
SPE-15-8-037/A/IC
Page 5 of 7
4. Mechanical Drawing (unit mm)
SPE-15-8-037/A/IC
Page 6 of 7
5. Packaging
SPE-15-8-037/A/IC
Page 7 of 7
相关型号:
©2020 ICPDF网 联系我们和版权申明