DCP.5900.12.4.A.02 [TAOGLAS]

rohs compliant;
DCP.5900.12.4.A.02
型号: DCP.5900.12.4.A.02
厂家: Taoglas    Taoglas
描述:

rohs compliant

文件: 总15页 (文件大小:987K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SPECIFICATION  
Part No.  
:
DCP.5900.12.4.A.02  
Description  
: 6dBi 5.9GHz 12mm  
DSRC Ceramic Patch Antenna  
Features  
: 5850MHz to 5925MHz DSRC band  
For V2V and V2X Applications  
Dimensions: 12mm*12mm*4mm  
Peak Gain 6dBi  
Pin type Ceramic Patch Antenna  
Tuned on 70mm*70mm ground plane  
RoHS compliant  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 1 of 15  
1.Introduction  
The DCP.5900 is a 12*12*4 mm embedded ceramic DSRC Patch antenna. It is a high  
performance compact 6dBi directional antenna designed to operate at 5850 MHz to  
5925 MHz for DSRC systems.  
DSRC (Dedicated Short Range Communications) is the communications media of  
choice for active safety V2V/V2X (Vehicle to Vehicle and Vehicle to Other) systems,  
primarily allocated for vehicle safety applications. DSRC supports high speed, low  
latency, short- range V2V/V2X wireless communications. The DCP.5900 ceramic patch  
antenna is mounted via pin and double-sided adhesive. This antenna has been tuned  
for a centre position on a 70mm *70mm ground plane and features world leading  
efficiency at 75%.  
The polarization has been designed to be circularly polarized to enable a more stable  
system signal strength on moving vehicles.  
For further optimization to customer specific device environments where positioning is  
off centre or a different ground-plane size, a custom tuned patch antenna can be  
supplied, subject to NRE and MOQ. Contact your regioinal Taoglas office for this, and  
for support to integrate and test this antenna’s performance in your device.  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 2 of 15  
2.Specification  
ELECTRICAL  
5850 MHz  
Operation Frequency  
5925 MHz  
75.19 %  
5.89 dBi  
-1.24  
Efficiency  
Peak Gain  
75.25 %  
5.32 dBi  
-1.24  
Average Gain  
Gain at Zenith  
VSWR  
4.5 dBi typ  
4.5 dBi typ  
1.8 max  
RHCP  
Antenna Polarization  
Impedance  
50 ohms  
MECHANICAL  
Ceramic Dimension  
Pin Diameter  
Pin Length  
12 x 12 x 4 mm  
0.85 mm  
1.7mm  
Weight  
2.1 g  
ENVIRONMENTAL  
-40°C to 105°C  
Non-condensing 65°C 95% RH  
Operation Temperature  
Humidity  
*All tests done on a 70mm*70mm ground plane.  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 3 of 15  
3.Antenna Characteristcs  
3.1 Return Loss  
3.2 Efficiency  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 4 of 15  
3.3 Average Gain  
3.4 Peak Gain  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 5 of 15  
3.5 Axial Ratio  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 6 of 15  
4.Antenna Radiation Pattern  
4.1Measurement Setup  
Y
X
Z
4.2XY-Plane  
X
Y
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 7 of 15  
4.3 XZ-Plane  
Z
X
Z
4.4 YZ-Plane  
Y
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 8 of 15  
4.5 3D Radiation Patterns ( 5850 MHz)  
4.6 3D Radiation Patterns ( 5925 MHz)  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 9 of 15  
5.Mechanical Drawing  
Unit:mm  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 10 of 15  
6.DCPD.12A EVB  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 11 of 15  
7.PCB Footprint Recommendation  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 12 of 15  
8.Packaging  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 13 of 15  
9.Application Note  
The DCP.5900 DSRC patch antenna is designed for 70mm*70mm ground plane center.  
Taoglas provides the experimental reference below if the antenna isn’t placed at the  
center of ground plane. Please refer to the return loss data shown in the graph below.  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 14 of 15  
Return Loss  
Antenna performance on different ground plane sizes is shown below. (The antenna  
locaton is at the center of ground plane)  
Return Loss  
sdfghjyfguyfluyfgoiuytdSPE-15-8-071/B/WY  
Page 15 of 15  

相关型号:

DCP.91.001.TN

TOOL FLAT SPANNER FOR COLLET NUT
ETC

DCP.91.023.TN

TOOL FLAT SPANNER FOR COLLET NUT
ETC

DCP.91.045.TN

TOOL FLAT SPANNER FOR COLLET NUT
ETC

DCP.99.040.TC

WRENCH OPEN END 4MM 2.76"
ETC

DCP.99.045.TC

WRENCH OPEN END 4.5MM 2.76"
ETC

DCP.99.050.TC

WRENCH OPEN END 5MM 3.07"
ETC

DCP.99.055.TC

WRENCH OPEN END 5.5MM 3.07"
ETC

DCP.99.060.TC

WRENCH OPEN END 6MM 3.07"
ETC

DCP0105

Miniature 5V Input, 1W Isolated UNREGULATED DC/DC CONVERTERS
BB

DCP010505

Miniature, 1W Isolated UNREGULATED DC/DC CONVERTERS
BB

DCP010505B

Miniature, 1W Isolated UNREGULATED DC/DC CONVERTERS
BB

DCP010505B

1-W, Isolated, Unregulated DC/DC Converter Modules
TI