FN9260X-2-06-Y [Schaffner]
General Purpose Power Entry Module with Fuses;型号: | FN9260X-2-06-Y |
厂家: | Schaffner International Ltd |
描述: | General Purpose Power Entry Module with Fuses |
文件: | 总6页 (文件大小:699K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
IEC Inlet Filters FN 9260
DATASHEET
General Purpose Power Entry Module with Fuses
Rated currents up to 10 A
Approvals & Compliances
Integrated single/dual fuse holder
Optional reduced leakage current versions (A/B
type)
Complies with IEC/EN 60601-1
Snap-in versions (S type)
Good attenuation performance
The FN 9260 power entry module combines an IEC
inlet, mains filter with excellent filter attenuation and
fuses in a small form factor. Choosing FN 9260
product line brings you rapid availability of a standard
filter associated with the necessary safety
Performance indicators
acceptances. Standard IEC connector filters are a
practical solution helping you to pass EMI system
approval in a short time. A wide selection on
amperage ratings, output connections, mounting
possibilities and filters for medical applications are
designed to offer you the desired solution.
Features and Benefits
Exceptional conducted attenuation performance,
based on chokes with high saturation resistance
and excellent thermal behavior
FN 9260 B versions comply with the requirements of
1MOP acc. to IEC/EN 60601-1 for creepage and
clearance, leakage current and high potential
testing
Technical specifications
250 VAC, 50/60 Hz
DC to 400 Hz
Maximum continuous operating voltage
Operating frequency
Versions up to 10 A are available with fuse holder for
one or two fuses
1 to 10 A @ 40°C max.
Rated currents
P –> PE 2000 VAC for 2 sec (standard types)
P –> PE 2500 VAC for 2 sec (B types)
P –> N 760 VAC for 2 sec
High potential test voltage
Custom-specific versions are available on request
IP 40 according to IEC 60529
-25°C to +85°C (25/85/21)
Protection category
Typical applications
Temperature range (operation and storage)
Design corresponding to
Portable electrical and electronic equipment
Medical equipment
UL 60939-3, CSA Std C22.2 No. 8, IEC/EN 60939-3, GB/
T15287, GB/T15288
Inlet plastic: UL 94 V-0
Flammability corresponding to
Small to medium-sized machines and household
equipment
Fuseholder plastic: UL 94 V-0
2,200,000 hours
MTBF @ 40°C/230 V (Mil-HB-217F)
Fuse holder
Single-phase power supplies, switch-mode power
supplies
Test and measurement equipment
1 or 2 fuses (Ø5 x 20 mm) (certified to IEC 60127-6)
250 VAC, 50/60 Hz
Operating voltage
Typical electrical schematic
2
EMC/EMI Products
Schaffner Group Datasheets 30 Oct 2020
Filter selection table
Filter
Buy
Rated current
@ 40°C (25°C)
Leakage current*
@ 250 VAC/50 Hz
(@ 120 VAC/60 Hz)
Inductance**
L
Capacitance**
Resistance**
R
Input/Output
connections
Fuses***
Weight
Cx
Cy
[A]
1 (1.2)
[mA]
0.31 (0.18)
0.31 (0.18)
0.31 (0.18)
0.31 (0.18)
0.31 (0.18)
[mH]
5.3
[μF]
0.1
0.1
0.1
0.1
0.1
[nF]
2.2
2.2
2.2
2.2
2.2
[kΩ]
1000
1000
1000
1000
1000
[Qty]
[g]
55
55
55
55
55
FN9260x-1-06-y
FN9260x-2-06-y
FN9260x-4-06-y
FN9260x-6-06-y
FN9260x-10-06-y
-06
-06
-06
-06
-06
2
2
2
2
2
2 (2.3)
2.7
4 (4.6)
1.0
6 (6.9)
0.3
10 (11.5)
0.2
FN9260xA1-1-06-y
FN9260xA-2-06-y
FN9260xA-4-06-y
FN9260xA-6-06-y
FN9260xA-10-06-y
1 (1.2)
2 (2.3)
0.03 (0.02)
0.07 (0.04)
0.07 (0.04)
0.07 (0.04)
0.07 (0.04)
5.3
2.7
1.0
0.3
0.2
0.1
0.1
0.1
0.1
0.1
0.22
0.47
0.47
0.47
0.47
1000
1000
1000
1000
1000
-06
-06
-06
-06
-06
2
2
2
2
2
55
55
55
55
55
4 (4.6)
6 (6.9)
10 (11.5)
FN9260xB-1-06-y
FN9260xB-2-06-y
FN9260xB-4-06-y
FN9260xB-6-06-y
FN9260 xB-10-06-y
1 (1.2)
2 (2.3)
0.00
0.00
0.00
0.00
0.00
5.3
2.7
1.0
0.3
0.2
0.1
0.1
0.1
0.1
0.1
1000
1000
1000
1000
1000
-06
-06
-06
-06
-06
2
2
2
2
2
55
55
55
55
55
4 (4.6)
6 (6.9)
10 (11.5)
FN261x-1-06-y
FN261x-2-06-y
FN261x-4-06-y
FN261x-6-06-y
FN261x-10-06-y
1 (1.2)
2 (2.3)
0.31 (0.18)
0.31 (0.18)
0.31 (0.18)
0.31 (0.18)
0.31 (0.18)
5.3
2.7
1.0
0.3
0.2
0.1
0.1
0.1
0.1
0.1
2.2
2.2
2.2
2.2
2.2
1000
1000
1000
1000
1000
-06
-06
-06
-06
-06
1
1
1
1
1
55
55
55
55
55
4 (4.6)
6 (6.9)
10 (11.5)
*** Leakage current under normal operating conditions (acc. to IEC60939-3). Note: if the neutral line is interrupted, worst case leakage could reach twice this level.
*** Tolerances apply: Inductance: -30/+50%, Capacitance: ±20%, Resistance: ±10%
*** Fuses are not included in the filter and need to be selected according to application
Product selector
For example: FN 9260-1-06-10, FN 9260 SB-10-06-20, FN 261 S-6-06-30
3
EMC/EMI Products
Schaffner Group Datasheets 30 Oct 2020
Typical filter attenuation
Per CISPR 17; A=50 Ω/50 Ω sym; B=50 Ω/50 Ω asym; C=0.1 Ω/100 Ω sym; D=100 Ω/0.1 Ω sym
FN 261/ FN 9260: 1 A type
FN 261/ FN 9260: 2 A type
FN 261/ FN 9260: 4 A type
FN 261/ FN 9260: 6 and 10 A types
Mechanical data
FN 9260/FN 261
FN 9260 S/FN 261 S
Panel cut out
Installation
4
EMC/EMI Products
Schaffner Group Datasheets 30 Oct 2020
Dimensions
FN 261
FN 9260
46
FN 261 S
FN 9260 S
34
Tolerances
A
±0.3
B
35
35
±0.3
C
36
±0.3
D
E
41
41
±0.3
27.8
5.5
27.8
5.5
32
+0.3/-0
±0.3
F
G
H
32
+0.3/-0
±0.1
Ø3.2
14
I
14
±0.5
±0.3
J
12.5
R ≤3.5
33
12.5
R ≤3.5
33
M
N
+0.3/-0
±0.3
P
29
29.5
R*
S
M3
90°
T**
T**
T**
0.6-1.5
1.6-2.5
2.6-3.5
**Recommended torque for M3 (90° countersunk flat head) is 0.5 Nm
** For selecting the panel thickness, please refer to the filter selector table.
All dimensions in mm; 1 inch = 25.4 mm
Tolerances according: ISO 2768-m/EN 22768-m
Please visit www.schaffner.com to find more details on filter connections.
5
EMC/EMI Products
Schaffner Group Datasheets 30 Oct 2020
Appropriated products
Accessories for IEC Inlet Filters and Power Entry Modules
The accessories displayed are a selection of available accessories for IEC Inlet filters and IEC Power entry modules. As they are displayed in a general way there might
be variants of the filters where the accessories are not available.
For further information please ask your local Schaffner Sales Partner and visit our homepage https://www.schaffner.com/.
The locking system has a tensile force
of typical 200N.
The locking system has a tensile force
of typical 300N. It is recommended to
use it with flange mount filters. For
details refer to our Application Note
"Using IEC Lock Power Cords with IEC
Inlets and Filters" Schaffner power
connector with IEC lock guard against
accidental disconnection of all
Power Cord with Locking
System for Inlet Filters IL 13, IL
13 P, IL 19
IEC C13 Rewireable Connector
for individual Power Cord with
Locking System
It is recommended to use it with
flange mount filters.
Lock Power Cords with IEC Inlets and
Filters"
Schaffner power cords with IEC lock
guard against
accidental disconnection of all
electrical appliances
electrical appliances with an IEC inlet.
No exchange or modification of the
IEC inlet or IEC inlet filter system is
needed. Easy retrofit for all electronic
equipments and devices.
with an IEC inlet. No exchange or
modification of the
IEC inlet or IEC inlet filter system is
needed. Easy
retrofit for all electronic equipments
and devices.
Link to Datasheet: Datasheet IEC C13
rewireable
Link to Datasheet: Datasheet IEC C13/
C19 locking cable
There is a full range of insulating boots
available from Schaffner that provide a
physical cover for the exposed
terminals on the back of IEC Inlet
Filters.
IB - Insulating Boots
These boots fit the simplest non-fused
and unswitched style up to the fully
fused and switched IEC filtered inlet.
The boots are made from a durable
black PVC material that conforms to
UL94-V0 flammability requirements.
The boots slip easily over the back of
the filter and reduce the risk of
electrical shock to maintenance
personnel whilst protecting the filter
from environmental hazard such as
the ingress of dust and moisture.
6
EMC/EMI Products
Schaffner Group Datasheets 30 Oct 2020
Headquarters, global
Sales and application centers
innovation and development
Switzerland
China
Spain
Schaffner Group
Industrie Nord
Schaffner EMC Ltd. Shanghai
T20-3 C, No 565 Chuangye Road,
Pudong district
Schaffner EMC España
Calle Caléndula 93, Miniparc III, Edificio E
El Soto de Moraleja, Alcobendas
28109 Madrid
Nordstrasse 11e
4542 Luterbach
T +41 32 681 66 26
info@schaffner.com
201201 Shanghai
T +86 21 3813 9500
cschina@schaffner.com
www.schaffner.com.cn
T +34 917 912 900
F +34 917 912 901
spainsales@schaffner.com
Finland
Sweden
Schaffner Oy
Schaffner EMC AB
Östermalmstorg 1
114 42 Stockholm
T +46 8 5050 2425
swedensales@schaffner.com
www.schaffner.com
Sauvonrinne 19 H
08500 Lohja
T +358 10 567 2855
finlandsales@schaffner.com
France
Schaffner EMC S.A.S.
16-20 Rue Louis Rameau
95875 Bezons
Switzerland
Schaffner EMV AG
Industrie Nord
T +33 1 34 34 30 60
F +33 1 39 47 02 28
francesales@schaffner.com
Nordstrasse 11e
4542 Luterbach
T +41 32 681 66 88
T +41 32 681 66 26
switzerlandsales@schaffner.com
Germany
Schaffner Deutschland GmbH
Schoemperlenstrasse 12B
76185 Karlsruhe
Taiwan R.O.C.
Schaffner EMV Ltd.
T +49 721 56910
20 Floor-2, No 97, Section 1, XinTai 5th Road
22175 XiZhi District New Taipei City 22175
T +886 2 2697 5500
F +49 721 569110
germanysales@schaffner.com
F +886 2 2697 5533
India
taiwansales@schaffner.com
www.schaffner.com.tw
Schaffner India Pvt. Ltd
REGUS WORLD TRADE CENTRE
WTC, 22nd Floor Unit No 2238, Brigade
Gateway Campus, 26/1, Dr. Rajkumar Road
Malleshwaram (W)
Thailand
Schaffner EMC Co. Ltd.
Northern Region Industrial Estate
67 Moo 4 Tambon Ban Klang
Amphur Muangg P.O. Box 14
51000 Lamphun
560055 Bangalore
T +91 80 67935355
indiasales@schaffner.com
T +66 53 58 11 04
Italy
F +66 53 58 10 19
Schaffner EMC S.r.l.
Via Ticino, 30
thailandsales@schaffner.com
20900 Monza (MB)
T +39 039 21 41 070
italysales@schaffner.com
United Kingdom
Schaffner Ltd.
To find your local partner within Schaffner‘s
global network: www.schaffner.com
1, Oakmede Place
Binfield
© 2020 Schaffner Group
Japan
RG42 4JF Berkshire
T +44 118 9770070
F +44 118 9792969
uksales@schaffner.com
Schaffner EMC K.K.
Taiju-Seimei Sangenjaya Bldg.
1-32-12, Kamiuma, Setagaya-ku
154-0011 Tokyo
The content of this document has been
carefully checked and understood. However,
neither Schaffner nor its subsidiaries assume
any liability whatsoever for any errors or
inaccuracies of this document and the
consequences thereof. Published specifica-
tions are subject to change without notice.
Product suitability for any area of application
must ultimately be determined by the
customer. In all cases, products must never
be operated outside their published
specifications. Schaffner does not guarantee
the availability of all published products. This
disclaimer shall be governed by substantive
Swiss law and resulting disputes shall be
settled by the courts at the place of business
of Schaffner Holding AG. Latest publications
and a complete disclaimer can be downloa-
ded from the Schaffner website. All
trademarks recognized.
T +81 3 5712 3650
USA
F +81 3 5712 3651
Schaffner EMC Inc.
52 Mayfield Avenue
Edison, New Jersey
T +1 732 225 9533
F +1 732 225 4789
usasales@schaffner.com
www.schaffnerusa.com
japansales@schaffner.com
www.schaffner.jp
Singapore
Schaffner EMC Pte Ltd.
#05-09, Kg Ubi Ind. Estate
408705 Singapore
T +65 6377 3283
F +65 6377 3281
singaporesales@schaffner.com
相关型号:
©2020 ICPDF网 联系我们和版权申明