SPWV [SYSTEMSENSOR]
Indoor Selectable Output Speaker Strobes and Dual Voltage Evacuation Speakers; 室内可选择输出扬声器闪光灯和双电压疏散音箱型号: | SPWV |
厂家: | SYSTEMSENSOR ADVANCED IDEAS. |
描述: | Indoor Selectable Output Speaker Strobes and Dual Voltage Evacuation Speakers |
文件: | 总4页 (文件大小:1074K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
•ꢀ
•ꢀ
Connectꢀtheꢀnotificationꢀapplianceꢀcircuitꢀorꢀspeakerꢀwiringꢀtoꢀtheꢀ
terminals on the mounting plate.
Attachꢀtheꢀspeakerꢀorꢀspeakerꢀstrobeꢀtoꢀtheꢀmountingꢀplateꢀbyꢀ
inserting the product tabs into the mounting plate grooves. Rotate
the device into position to lock the product pins into the mounting
plate terminals. The device will temporarily hold in place with a
catch until it is secured with a captured mounting screw.
•ꢀ
Attachꢀaꢀuniversalꢀmountingꢀplateꢀtoꢀaꢀ4ꢀ×ꢀ4ꢀ×ꢀ21⁄8ꢀinchꢀbackꢀboxꢀ.ꢀ
Flush mount applications are achievable without the need for an
extension ring.
Indoor Selectable
Output Speaker Strobes
and Dual Voltage
Evacuation Speakers
The new SpectrAlert® Advance selectable output
speaker strobes and dual evacuation speakers can
reduce ground faults and allow faster installation.
Features
•ꢀPlug-in design
The SpectrAlert Advance Series of speakers and speaker strobes
is designed to reduce ground faults. The plug-in design allows the
installer to pre-wire mounting plates and dress the wires before
plugging in the speakers. The plastic cover prevents nicked wires by
covering exposed speaker components.
•ꢀProtective cover isolates speaker components, reduces ground
faults
•ꢀElectrical compatibility with existing SpectrAlert products
This design also allows faster installations with instant feedback to
ensure that wiring is properly connected, rotary switches to select
voltage and power settings, and 11 field selectable candela settings
for wall and ceiling speaker strobes.
•ꢀField selectable candela settings on wall and ceiling units:
Standard: 15, 15/75, 30, 75, 95, 110, 115
High: 135, 150, 177, 185
•ꢀShorting spring on mounting plate tests continuity before
installation
The low total harmonic distortion of the SP speaker offers high
fidelity sound output while the SPV speaker offers high volume
sound output for use in high ambient noise applications.
•ꢀRotary switch simplifies field selection of speaker voltage (25 and
70.7 Vrms) and power settings (¼, ½, 1 and 2 watts)
•ꢀUniversal mounting plate for wall- and ceiling-mount units
•ꢀCompatible with System Sensor synchronization protocol
•ꢀSP speakers offer high fidelity sound output
SpectrAlert Advance makes installation easy
•ꢀSPV speakers offer high volume sound output
•ꢀAutomatic selection of 12- or 24-volt operation at 15 and 15/75
candela
•ꢀNo extension ring required
•ꢀCeiling and wall mount application
•ꢀOptional tamper resistant Torx head screw included
Agency Listings
S4048
7320-1653:201
10-08-E
SpectrAlert Advance Speaker and Speaker Strobe Specifications
Architectural/Engineering Specifications
General
SpectrAlertꢀAdvanceꢀspeakerꢀandꢀspeakerꢀstrobesꢀshallꢀmountꢀtoꢀaꢀ4ꢀ×ꢀ4ꢀ×ꢀ21⁄8-inchꢀbackꢀbox.ꢀAꢀuniversalꢀmountingꢀplateꢀshallꢀbeꢀusedꢀforꢀmountingꢀceilingꢀandꢀ
wall products. The notification appliance circuit and amplifier wiring shall terminate at the universal mounting plate. Also, SpectrAlert Advance speaker strobes,
whenꢀusedꢀwithꢀtheꢀSync•Circuit™ꢀModuleꢀaccessory,ꢀshallꢀbeꢀpoweredꢀfromꢀaꢀnon-codedꢀnotificationꢀapplianceꢀcircuitꢀoutputꢀandꢀshallꢀoperateꢀonꢀaꢀnominalꢀ
ꢁ2ꢀorꢀ24ꢀvolts.ꢀWhenꢀusedꢀwithꢀtheꢀSync•CircuitꢀModule,ꢀꢁ2-voltꢀratedꢀnotificationꢀapplianceꢀcircuitꢀoutputsꢀshallꢀoperateꢀbetweenꢀnineꢀandꢀꢁ7.5ꢀvolts;ꢀ24-voltꢀ
rated notification appliance circuit outputs shall operate between 17 and 33 volts. Indoor SpectrAlert Advance products shall operate between 32°F and 120°F
from a regulated DC, or full-wave rectified, unfiltered power supply. Speaker strobes shall have field-selectable candela settings including 15, 15/75, 30, 75, 95,
110, 115, 135, 150, 177, 185.
Speaker
The speaker shall be a System Sensor SpectrAlert Advance model _______ dual-voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms.
It should be listed to UL 1480 and shall be approved for fire protective service. The speaker shall have a frequency range of 400 to 4000 Hz and shall have an
operating temperature between 32°F and 120°F. Speaker shall have power taps and voltage that are selected by rotary switches.
Speaker Strobe combination
The speaker strobe shall be a System Sensor SpectrAlert Advance model __________ listed to UL1480 and UL 1971 and be approved for fire protective signaling
systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms selected via rotary switch, and shall have a frequency range of 400 to 4000 Hz.
Speaker shall have power taps which are selected by rotary switch. The strobe shall comply with the NFPA72 requirements for visible signaling appliances,
flashing at 1 Hz over the strobe’s entire operating voltage range. The strobe light shall consist of a xenon flash tube and associated lens/reflector system.
Synchronization Module
TheꢀmoduleꢀshallꢀbeꢀaꢀSystemꢀSensorꢀSync•CircuitꢀmodelꢀMDLꢀlistedꢀtoꢀULꢀ464ꢀandꢀshallꢀbeꢀapprovedꢀforꢀfireꢀprotectiveꢀservice.ꢀTheꢀmoduleꢀshallꢀsynchronize
SpectrAlertꢀstrobesꢀatꢀꢁHz.ꢀTheꢀmoduleꢀshallꢀmountꢀtoꢀaꢀ411⁄ꢂꢃꢀ×ꢀ411⁄ꢂꢃꢀ×ꢀ21⁄8-inchꢀbackꢀbox.ꢀTheꢀmoduleꢀshallꢀalsoꢀcontrolꢀtwoꢀStyleꢀYꢀ(classꢀB)ꢀcircuitsꢀorꢀoneꢀStyleꢀ
Z (class A) circuit. The module shall synchronize multiple zones. Daisy chaining two or more synchronization modules together will synchronize all the zones
they control. The module shall not operate on a coded power supply.
Physical Specifications
Operating Temperature
Humidity Range
32°F to 120°F (0°C to 49°C)
10 to 93% non-condensing
Dimensions, Wall-Mount
SPS Speaker Strobe
6.0ꢀinꢀLꢀ×ꢀ5.0ꢀinꢀWꢀ×ꢀ4.7ꢀinꢀDꢀ(includingꢀlensꢀandꢀspeaker)
6.0ꢀinꢀLꢀ×ꢀ5.0ꢀinꢀWꢀ×ꢀ4.9ꢀinꢀDꢀ(includingꢀlensꢀandꢀspeaker)
6.0ꢀinꢀLꢀ×ꢀ5.0ꢀinꢀWꢀ×ꢀ2.ꢄꢀinꢀD
SPSV Speaker Strobe
SP Speaker
SPSV Speaker
6.0ꢀinꢀLꢀ×ꢀ5.0ꢀinꢀWꢀ×ꢀ2.9ꢀinꢀD
Dimensions, Ceiling-Mount
SPS Speaker Strobe
6.ꢄꢀinꢀDia.ꢀ×ꢀ4.7ꢀinꢀDꢀ(includingꢀlensꢀandꢀspeaker)
6.ꢄꢀinꢀDia.ꢀ×ꢀ4.ꢄꢀinꢀDꢀ(includingꢀlensꢀandꢀspeaker)
6.ꢄꢀinꢀDia.ꢀ×ꢀ2.ꢄꢀinꢀD
SPSV Speaker Strobe
SP Speaker
SPV Speaker
6.ꢄꢀinꢀDia.ꢀ×ꢀ2.9ꢀinꢀD
Electrical/Operating Specifications
Nominal Voltage (speakers)
Maximum Supervisory Voltage (speakers)
Strobe Flash Rate
25 Volts or 70.7 Volts (nominal)
50 VDC
1 flash per second
Nominal Voltage (strobes)
Regulated 12 VDC/FWR or regulated 24 DC/FWR
8 to 17.5 V (12 V nominal) or 16 to 33V (24 V nominal)
Operating Voltage Range (includes fire alarm
panels with built in sync)
Operating Voltage with MDL Sync Module
9 to 17.5 V (12 V nominal) or 17 to 33V (24 V nominal)
400 to 4000 Hz
Frequency Range
Power
¼, ½, 1, 2 watts
A05-0424-002
UL Current Draw Data
UL Max. Strobe Current Draw (mA RMS)
8 to 17.5 Volts
16 to 33 Volts
Candela
DC
123
142
NA
NA
NA
NA
NA
NA
NA
NA
NA
FWR
128
148
NA
NA
NA
NA
NA
NA
NA
NA
NA
DC
66
FWR
71
Standard
Candela Range
15
15/75
30
77
81
94
96
75
158
181
202
210
228
246
281
286
153
176
195
205
207
220
251
258
95
110
115
135
150
177
185
High
Candela Range
Sound Output
UL Reverberant (dBA @ 10 ft.)
Wall-Mount SP Series
2W
86
90
86
90
85
89
85
89
1W
83
87
83
87
82
86
82
86
½ W
80
84
80
84
79
83
79
83
¼ W
77
81
77
81
76
80
76
80
Wall-Mount SPV Series
Ceiling-Mount SPC Series
Ceiling-Mount SPCV Series
Wall-Mount SPS Series
Wall-Mount SPSV Series
Ceiling-Mount SPSC Series
Ceiling-Mount SPSCV Series
Dimensions
.97˝ 1.96˝
2.83˝
6.81˝
.97˝ 1.84˝
6.81˝
6.81˝
1.60˝ 1.84˝
Ceiling Mount SPV Speaker
Ceiling Mount SP Speaker
Ceiling Mount SPS Speaker Strobe
.97˝
2.83˝
1.84˝
5.00˝
5.00˝
1.60˝
1.84˝
5.98˝
5.97˝
Wall Mount SP Speaker
Wall Mount SPS Speaker Strobe
A05-0424-002
Surface Mounting
Ceiling Mount Speaker with SPBBSCW Back Box Skirt
Wall Mount Speaker Strobe with SPBBS Back Box Skirt
Ordering Information for SpectrAlert® Advance Speakers and Speaker Strobes
Wall Mount
White
Red
Description
SPW
SPR
Speaker only
SPWV
SPRV
Speakerꢀonly,ꢀHighꢀdB
SPSW*
SPSR*
SPSRH*
SPSRV*
Speaker Strobe, Selectable Candela (15, 15/75, 30, 75, 95, 110, 115)
Speaker Strobe, Selectable Candela, High cd (135, 150, 177, 185)
SpeakerꢀStrobe,ꢀSelectableꢀCandelaꢀ(ꢁ5,ꢀꢁ5/75,ꢀ30,ꢀ75,ꢀ95,ꢀꢁꢁ0,ꢀꢁꢁ5),ꢀHighꢀdB
SPSWH*
SPSWV*
Ceiling Mount
White
Red
Description
SPCW
SPCR
Speaker only
SPCWV
SPSCW*
SPSCWH*
SPSCWV*
SPSCWVH*
Accessories
White
SPCRV
SPSCR
SPSCRH
SPSCRV
SPSCRVH
Speakerꢀonly,ꢀHighꢀdB
Speaker Strobe, Selectable Candela (15, 15/75, 30, 50, 75, 95, 110, 115)
Speaker Strobe, Selectable Candela, High cd (135, 150, 177, 185)
SpeakerꢀStrobe,ꢀSelectableꢀCandelaꢀ(ꢁ5,ꢀꢁ5/75,ꢀ30,ꢀ75,ꢀ95,ꢀꢁꢁ0,ꢀꢁꢁ5),ꢀHighꢀdB
SpeakerꢀStrobe,ꢀSelectableꢀCandela,ꢀHighꢀdB,ꢀHighꢀcdꢀ(ꢁ35,ꢀꢁ50,ꢀꢁ77,ꢀꢁꢄ5)
Red
Description
RFPW
RFP
7ꢀinꢀ×ꢀ9.5ꢀinꢀRetrofitꢀPlate
CeilingꢀMountꢀBackꢀBoxꢀSkirt
WallꢀMountꢀBackꢀBoxꢀSkirt
WallꢀMountꢀTrimꢀRing
CeilingꢀMountꢀTrimꢀRing
SPBBSCW
SPBBSW
TRW
SPBBSC
SPBBS
TR
TRCW
TRC
* Add -P to model number for plain housing (no“FIRE”marking on the cover) e.g. SPSW-P
©2008 System Sensor.
3ꢄ25ꢀOhioꢀAvenueꢀ•ꢀSt.ꢀCharles,ꢀILꢀ60ꢁ74
Phone:ꢀꢄ00-SENSOR2ꢀ•ꢀFax:ꢀ630-377-6495
Product specifications subject to change without notice. Visit systemsensor.com for
current product information, including the latest version of this data sheet.
A05-0424-002ꢀ•ꢀ5/0ꢄꢀ•ꢀ#ꢁ9ꢄ6
相关型号:
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明