SPE6V8UHMS10RGB [SYNC-POWER]
Ultra Low Capacitance 4 -Line ESD Protection Array; 超低电容4 - 线路ESD保护阵列型号: | SPE6V8UHMS10RGB |
厂家: | SYNC POWER CROP. |
描述: | Ultra Low Capacitance 4 -Line ESD Protection Array |
文件: | 总6页 (文件大小:249K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SPE6V8UH
Ultra Low Capacitance 4 -Line ESD Protection Array
DESCRIPTION
APPLICATIONS
The SPE6V8UH is 4-channel very low capacitance
ESD transient voltage suppressor which provides a
very high level of protection for sensitive electronic
components that may be subjected to electrostatic
discharge. It is particularly well-suited to protect
systems with high speed communication lines from
ESD, EFT, and lighting.
The SPE6V8UH is consists of eight low capacitance
steering diodes and a TVS diode in a MSOP-10L
package. Each channel of SPE6V8UH could safely
dissipate ESD strikes of ±15kV air discharge as well
as ±8kV contact discharge, meeting the requirement of
the IEC 61000-4-2 international standard. Using the
MIL-STD-883 (Method 3015) specification for
Human Body Model (HBM) ESD, the device provides
protection for contact discharges to greater than
±15kV.
Cellular Handsets and Accessories
Cordless Phone
PDA
Notebooks and Handhelds
Portable Instrumentation
Digital Cameras
MP3 Player High Definition Multi-Media
Interface Protection
USB 2.0 Power and Data Line
Monitors and Notebook Computers
HDSL, IDSL Secondary IC Side Protection
10/100/1000 Ethernet
FEATURES
PIN CONFIGURATION ( MSOP-10L )
Transient protection for data lines to
IEC 61000-4-2 (ESD)
±15kV (air)
±8kV (contact)
IEC 61000-4-4 (EFT)
40A (5/50ns)
Protects five bidirectional I/O lines
Working voltage: 5V
Low leakage current
Low operating and clamping voltages
Low capacitance: 0.35 pF typical
PART MARKING
2009/ 06 / 20 Ver.1
Page 1
SPE6V8UH
Ultra Low Capacitance 4 -Line ESD Protection Array
ORDERING INFORMATION
Part Number
Package
Part Marking
6V8U
YYWW
SPE6V8UHMS10RGB
MSOP-10L
※ SPE6V8UHMS10RGB : Tape Reel ; Pb – Free ; Halogen - Free
ABSOULTE MAXIMUM RATINGS
(TA=25℃ Unless otherwise noted)
Parameter
Symbol
Typical
Unit
Peak Pulse Power ( tp = 8/20 μs )
Maximum Peak Pulse Current ( tp = 8/20 μs )
ESD per ICE 61000 – 4 – 2 (Air )
ESD per ICE 61000 – 4 – 2 (Contact )
Operating Junction Temperature
Storage Temperature Range
Ppk
Ipp
180
7
W
A
Vpp
Vpp
TJ
±15
KV
KV
℃
±8
-55 ~ 150
-55 ~ 150
260 ( 10sec )
TSTG
TL
℃
Lead Soldering Temperature
℃
ELECTRICAL CHARACTERISTICS
(TA=25℃ Unless otherwise noted)
Parameter
Symbol
Conditions
Min.
Typ
Max. Unit
Reverse Stand – Off Voltage
Forward Voltage @ IF
Reverse Breakdown Voltage
Reverse Leakage Current
Clamping Voltage
VRWM
VF
5
V
V
IF = 10mA
It = 1mA
0.4
6.0
0.8
7.0
1.5
VBR
IR
V
VRWM = 5V , T=25℃
Ipp = 1A , tp = 8/20 μs
0.01
1
μA
V
VC
12
VR = 0V, f = 1MHz
Any I/O pin to Ground
VR = 0V, f = 1MHz
Between I/O pins
0.7
1.0
Junction Capacitance
Cj
pF
0.35
2009/ 06 / 20 Ver.1
Page 2
SPE6V8UH
Ultra Low Capacitance 4 -Line ESD Protection Array
TYPICAL CHARACTERISTICS
2009/ 06 / 20 Ver.1
Page 3
SPE6V8UH
Ultra Low Capacitance 4 -Line ESD Protection Array
SCHEMATIC & PIN CONFIGURATION
APPLICATION INFORMATION
The HDMI Compliance Test Specification (CTS) requires sink (receiver) ports maintain a differential impedance of
100 Ohms +/- 15%. The measurement is taken using a Time Domain Reflect (TDR) method that utilizes a pulse
with a rise time <= 200ps.ESD protection devices have an inherent junction capacitance. Even a small amount of
added capacitance on an HDMI port will cause the impedance of the differential pair to drop. As such, some form
of compensation to the layout will be required to bring the differential pairs back within the required 100Ohm
+/-15% range. The higher the added capacitance, the more extreme the modifications will need to be. If the added
capacitance is too high, compensation may not even be possible. The SPE6V8UH presents <1pF capacitance
between the pairs while being rated to handle >8KV ESD contact discharges(>15KV air discharge) as outlined in
IEC 61000-4-2.As such, it is possible to make minor adjustments to the board layout parameters to compensate for
the added capacitance of the SPE6V8UH. As figure shows how to implement the SPE6V8UH in an HDMI
application (transmitter and receiver).
2009/ 06 / 20 Ver.1
Page 4
SPE6V8UH
Ultra Low Capacitance 4 -Line ESD Protection Array
MSOP-10L PACKAGE OUTLINE
2009/ 06 / 20 Ver.1
Page 5
SPE6V8UH
Ultra Low Capacitance 4 -Line ESD Protection Array
Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the
penalties of use of such information or for any violation of patents or other rights of third parties which may result from its use.
No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions
mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information
previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support
devices or systems without express written approval of SYNC Power Corporation.
©The SYNC Power logo is a registered trademark of SYNC Power Corporation
©2004 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved
SYNC Power Corporation
7F-2, No.3-1, Park Street
NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C
Phone: 886-2-2655-8178
Fax: 886-2-2655-8468
©http://www.syncpower.com
2009/ 06 / 20 Ver.1
Page 6
相关型号:
©2020 ICPDF网 联系我们和版权申明