TTEZNH20PCDLT [SWITCH]

EZ NORM JACK; EZ NORM JACK


型号：	TTEZNH20PCDLT
厂家：	SWITCHCRAFT, INC.
描述：	EZ NORM JACK EZ NORM JACK
文件：	总3页 (文件大小：187K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NPB 555 EZ Norm Series

The EZ Norm offers a simplified method for setting up and changing normals to a Bantam /

TT patchbay. Simply remove the middle designation strip, and rotate the center cam, using a

standard screwdriver. An audible “click” can be heard as you rotate from full normals to no

normals to half normals. An opaque marking strip is included to conceal the normal positions,

if needed.

EZ NORM JACK SPECIFICATIONS

MATERIALS:

Insertion – Withdrawal Forces: 1 – 4 lbs.

Moisture resistance: MIL-STD 202 Method 106

Thermal shock: MIL-STD 202 Method 107

Salt spray: MIL-STD 202 Method 101 (48 hrs.)

Vibration: MIL-STD 202 Method 213

Housing & Cover: 94V-0 rated thermoplastic

Sleeve Collar: Nickel plated copper alloy

Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver

with welded contacts

Welded Contacts: Gold

Cam Switching Springs: Silver plated copper alloy

Cam Switching Contacts: Silver plated copper alloy

ELECTRICAL:

Jack Spring Contact Resistance: 30 milliohm Maximum

Cam Switch Contact Resistance: 30 milliohm Maximum

Insulation Resistance: 10,000 Megaohms

Dielectric Withstanding Voltage: 500 VAC (rms) at 60 Hz

Insertion Loss: -0.5dB up to 10 MHz

MECHANICAL:

Jack Mechanical Life: 30,000 cycles

Cam Contact Mechanical Life: 30,000 cycles

EZN

E90

E56

E38

IDC

3PIN

CDL

• WIRE WRAP AND SOLDER LUG NOT AVAILABLE AS PREWIRES.

• EVERYTHING EXCEPT SOLDER LUG AND WIRE WRAP AVAILABLE AS PREWIRE ONLY.

• IDC NOT AVAILABLE IN 1 RACK UNIT HEIGHT.

• FRONT ACCESS ONLY AVAILABLE AS 1 RACK UNIT WITH IDC SUPPORTS.

• FRONT ACCESS HAS TRAY AND BAR COMBO SO NO SUPPORT DESIGNATION IS USED.

• CABLE TRAY AND CABLE BAR DESIGNATIONS USED FOR UNWIRED UNITS ONLY.

• UMBILICAL UNIT STANDARD WITH 4' HARNESS AND 2RU FRONT AND BACK PLANE.

w w w . s w i t c h c r a f t . c o m

5555 North Elston Avenue/Chicago, IL. 60630

Phone: 773-792-2700 Fax: 773-792-2129

EZ Norm Series NPB 555

Racks

The EZ Norm comes in 3 different

rack heights, 1RU, 1.5RU, and 2 RU.

Front Access

Harness Assembly

The EZ Norm is also offered as a harness

assembly, with a standard harness of 4 ft.

Custom lengths are available, call

Switchcraft for details.

The Front Access option offers a slide-out tray,

allowing the end user to re-terminate the

patchbay from the front of the rack.

w w w . s w i t c h c r a f t . c o m

5555 North Elston Avenue/Chicago, IL. 60630

Phone: 773-792-2700 Fax: 773-792-2129

NPB 555 EZ Norm Series

Rear Connectors

The EZ Norm is offered with a wide range of back panel termination options.

Included are 3 pin, EDAC 38 pin, EDAC 56 pin, EDAC 90 pin, Cannon DL, Switchcraft PPT's,

solder terminals, and wire wrap terminals.

3 PIN

EDAC 38 PIN

EDAC 56 PIN

EDAC 90 PIN

SWITCHCRAFT’S

PPT PUNCH TERMINAL

SOLDER

TERMINAL

WIRE WRAP

TERMINAL

CANNON DL

w w w . s w i t c h c r a f t . c o m

5555 North Elston Avenue/Chicago, IL. 60630

Phone: 773-792-2700 Fax: 773-792-2129

相关型号：

TTEZNH20PE38

EZ NORM JACK

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

SWITCH

SWITCH

TTEZNH20PFAT

EZ NORM JACK

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-

SWITCH