HV5122PG [SUPERTEX]

32-Channel Serial To Parallel Converter With Open Drain Outputs; 32通道串行到并行转换器采用开漏输出
HV5122PG
型号: HV5122PG
厂家: Supertex, Inc    Supertex, Inc
描述:

32-Channel Serial To Parallel Converter With Open Drain Outputs
32通道串行到并行转换器采用开漏输出

显示驱动器 转换器 驱动程序和接口 接口集成电路
文件: 总6页 (文件大小:452K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HV5122  
HV5222  
32-Channel Serial To Parallel Converter  
With Open Drain Outputs  
Ordering Information  
Package Options  
44 J-Lead Quad  
Device  
44 J-Lead Quad  
44 Lead Quad  
Die  
Ceramic Chip Carrier  
Plastic Chip Carrier  
Plastic Gullwing  
HV5122  
HV5222  
HV5122DJ  
HV5222DJ  
HV5122PJ  
HV5122PG  
HV5222PG  
HV5122X  
HV5222X  
HV5222PJ  
Features  
General Description  
Processed with HVCMOS® technology  
The HV51 and HV52 are low voltage serial to high voltage parallel  
converters with open drain outputs. These devices have been  
designed for use as drivers for AC electroluminescent displays.  
They can also be used in any application requiring multiple output  
high voltage current sinking capabilities such as driving inkjet and  
electrostatic print heads, plasma panels, vacuum fluorescent, or  
large matrix LCD displays.  
Output voltages to 225V using a ramped supply voltage  
Sink current minimum 100mA  
Shift register speed 8MHz  
Strobe and enable inputs  
CMOS compatible inputs  
These devices consist of a 32-bit shift register and control logic to  
perform the Output Enable and All-ON functions. Data is shifted  
through the shift register on the high to low transition of the clock.  
The HV51 shifts in the counterclockwise direction when viewed  
from the top of the package and the HV52 shifts in the clockwise  
direction. A data output buffer is provided for cascading devices.  
This output reflects the current status of the last bit of the shift  
register. Operation of the shift register is not affected by the OE  
(Output Enable) or the STR (Strobe) inputs.  
Forward and reverse shifting options  
44-lead ceramic surface mount package  
Hi-Rel processing available  
Absolute Maximum Ratings1  
The HV51 and HV52 have been designed to be used in systems  
which either switch off the high voltage supply before changing  
the state of the high voltage outputs or which limit the current  
through each output.  
Supply voltage, VDD  
Output voltage, VPP  
Logic input levels  
Ground current2  
-0.5V to +15V  
-0.5V to +250V  
-0.5V to VDD + 0.5V  
1.5A  
Continuous total power dissipation3 Plastic  
Ceramic  
1200mW  
1500mW  
Operating temperature range  
Plastic -40°C to +85°C  
Ceramic  
-55 to +125°C  
-65°C to +150°C  
260°C  
Storage temperature range  
Lead temperature 1.6mm (1/16 inch)  
from case for 10 seconds  
Notes:  
1. All voltages are referenced to GND.  
2. Duty cycle is limited by the total power dissipated in the package.  
3. For operation above 25°C ambient derate linearly to maximum operating  
temperature at 20mW/°C for plasitc and at 15mW/°C for ceramic.  
12/13/01  
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability  
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to  
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the  
Supertex website: http://www.supertex.com. For complete liability information on all Supertex products, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.  
HV5122/HV5222  
Electrical Characteristics (over recommended operating conditions unless noted)  
DC Characteristics  
Symbol  
Parameter  
Min  
Typ  
Max  
Units Conditions  
IDD  
VDD supply current  
15  
mA  
fCLK = 8MHz  
FDATA = 4MHz  
IDDQ  
Quiescent VDD supply current  
Off state output current  
100  
10  
µA  
µA  
All VIN = 0V  
IO(OFF)  
All outputs high  
All SWS parallel  
IIH  
High-level logic input current  
Low-level logic input current  
High-level output data out  
Low-level output voltage  
1
µA  
µA  
V
VIH = 12V  
IIL  
-1  
VIL = 0V  
VOH  
VOL  
VDD - 1.0V  
IDout = -100µA  
IHVout = +100mA  
HVOUT  
15.0  
1.0  
V
Data out  
V
IDout = +100µA  
VOC  
HVOUT Clamp Voltage  
-1.5  
V
IOL = -100mA  
AC Characteristics (VDD = 12V, TC = 25°C)  
Symbol  
fCLK  
Parameter  
Min  
Typ  
Max  
Units  
MHz  
ns  
Conditions  
Clock frequency  
8
tW  
Clock width high or low  
62  
25  
10  
tSU  
tH  
Data set-up time before clock falls  
Data hold time after clock falls  
Turn ON time, HVOUT from strobe  
Delay time clock to data high to low  
Delay time clock to data low to high  
ns  
ns  
tON  
tDHL  
tDLH  
500  
100  
100  
ns  
RL = 2Kto 200V  
CL = 15pF  
ns  
ns  
CL = 15pF  
Recommended Operating Conditions  
Symbol  
VDD  
Parameter  
Min  
Typ  
Max  
13.2  
225  
VDD  
2.0  
Units  
V
Logic supply voltage  
High voltage output  
High-level input voltage  
Low-level input voltage  
Clock frequency  
10.8  
-0.3  
12  
HVOUT  
VIH  
V
VDD - 2V  
0
V
VIL  
V
fCLK  
8
MHz  
°C  
°C  
Plastic  
-40  
-55  
+85  
+125  
TA  
Operating free-air temperature  
Ceramic  
Notes:  
Power-up sequence should be the following:  
1. Connect ground.  
2. Apply VDD  
.
3. Connect all inputs to a known state.  
Power-down sequence should be the reverse of the above.  
2
HV5122/HV5222  
Input and Output Equivalent Circuits  
V
DD  
V
DD  
HV  
OUT  
Data Out  
Input  
HV  
IN  
GND  
GND  
GND  
Logic Data Output  
Logic Inputs  
High Voltage Outputs  
Switching Waveforms  
12V  
Data  
In  
Data Valid 1  
tH  
0V  
tSU  
50%  
12V  
0V  
Clock  
50%  
50%  
tWH  
tWL  
Data  
Out  
50%  
tDHL  
Data  
Out  
tDLH  
Strobe  
50%  
tON  
HVOUT  
15V  
3
HV5122/HV5222  
Functional Block Diagram  
Strobe  
Output Enable  
HVOUT  
1
Data Input  
Clock  
HVOUT  
2
28 Additional  
32 bit  
Static Shift  
Register  
Outputs  
HVOUT31  
HVOUT32  
Data Out  
Function Table  
Inputs  
Outputs  
Function  
Shift Reg  
HV Outputs  
Data Out  
Data In  
CLK  
OE  
Strobe  
1
232  
1
232  
*
All on  
X
X
X
X
X
L
L
H
H
H
*
**  
ON  
ONON  
*
*
All off  
*
**  
OFF  
OFF  
OFFOFF  
OFFOFF  
Load S/R  
Output enable  
H or L  
X
L
H or L **  
H or L **  
H or L  
H
ON or OFF **  
*
Notes:  
X = Don’t care  
* = Dependent on previous stage’s state before the last CLK : High to low transition.  
= High to low transition  
H = High level  
L = Low level  
4
HV5122/HV5222  
Pin Configurations  
Package Outline  
HV51  
44 Pin J-Lead Package  
39 38 37 36 35 34 33 32 31 30 29  
Pin Function  
Pin Function  
28  
27  
26  
25  
24  
23  
22  
21  
20  
19  
18  
40  
41  
42  
43  
44  
1
1
2
3
4
5
6
7
8
HVOUT 16  
HVOUT 17  
HVOUT 18  
HVOUT 19  
HVOUT 20  
HVOUT 21  
HVOUT 22  
HVOUT 23  
HVOUT 24  
HVOUT 25  
HVOUT 26  
HVOUT 27  
HVOUT 28  
HVOUT 29  
HVOUT 30  
HVOUT 31  
HVOUT 32  
Data Out  
N/C  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
Output Enable  
Clock  
GND  
VDD  
Stobe  
Data In  
N/C  
2
3
HVOUT  
HVOUT  
HVOUT  
HVOUT  
HVOUT  
HVOUT  
HVOUT  
HVOUT  
HVOUT  
1
2
3
4
5
6
7
8
9
4
9
5
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
6
7
8
9
10 11 12 13 14 15 16 17  
top view  
44-pin J-Lead Package  
HVOUT 10  
HVOUT 11  
HVOUT 12  
HVOUT 13  
HVOUT 14  
HVOUT 15  
N/C  
N/C  
N/C  
5
HV5122/HV5222  
Pin Configurations  
HV51  
Package Outline  
44-Pin Quad Plastic Package  
Pin Function  
Pin Function  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
Data Out  
N/C  
N/C  
N/C  
N/C  
Output Enable  
CLK  
GND  
1
2
3
4
5
6
7
8
HVOUT 11  
HVOUT 12  
HVOUT 13  
HVOUT 14  
HVOUT 15  
HVOUT 16  
HVOUT 17  
HVOUT 18  
HVOUT 19  
HVOUT 20  
HVOUT 21  
HVOUT 22  
HVOUT 23  
HVOUT 24  
HVOUT 25  
HVOUT 26  
HVOUT 27  
HVOUT 28  
HVOUT 29  
HVOUT 30  
HVOUT 31  
HVOUT 32  
44 43 42 41 40 39 38 37 36 35 34  
33  
32  
31  
30  
29  
28  
27  
26  
25  
24  
23  
1
2
3
4
5
6
VDD  
9
7
Strobe  
Data In  
N/C  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
8
9
10  
11  
HVOUT 1  
HVOUT 2  
HVOUT 3  
HVOUT 4  
HVOUT 5  
HVOUT 6  
HVOUT 7  
HVOUT 8  
HVOUT 9  
HVOUT 10  
12 13 14 15  
16  
17 18 19 20 21 22  
top view  
44-pin PQFP Package  
HV52  
44-Pin Quad Plastic Package  
Pin Function  
Pin Function  
1
2
3
4
5
6
7
8
HVOUT 22  
HVOUT 21  
HVOUT 20  
HVOUT 19  
HVOUT 18  
HVOUT 17  
HVOUT 16  
HVOUT 15  
HVOUT 14  
HVOUT 13  
HVOUT 12  
HVOUT 11  
HVOUT 10  
HVOUT 9  
HVOUT 8  
HVOUT 7  
HVOUT 6  
HVOUT 5  
HVOUT 4  
HVOUT 3  
HVOUT 2  
HVOUT 1  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
Data Out  
N/C  
N/C  
N/C  
N/C  
Output Enable  
CLK  
GND  
VDD  
Strobe  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
Data In  
N/C  
HVOUT 32  
HVOUT 31  
HVOUT 30  
HVOUT 29  
HVOUT 28  
HVOUT 27  
HVOUT 26  
HVOUT 25  
HVOUT 24  
HVOUT 23  
12/13/010  
1235 Bordeaux Drive, Sunnyvale, CA 94089  
TEL: (408) 744-0100 • FAX: (408) 222-4895  
www.supertex.com  
6
©2001 Supertex Inc. All rights reserved. Unauthorized use or reproduction prohibited.  

相关型号:

HV5122PG-G

EL DISPLAY DRIVER, PQFP44
MICROCHIP

HV5122PG-G

EL Driver, 32-Segment, CMOS, PQFP44, 10.00 X 10.00 MM, 2.45 MM HEIGHT, 0.80 MM PITCH, GREEN, PLASTIC, MS-112AA, QFP-44
SUPERTEX

HV5122PG-GM919

EL Driver,
MICROCHIP

HV5122PJ

32-Channel Serial To Parallel Converter With Open Drain Outputs
SUPERTEX

HV5122PJ-G

EL Driver, 32-Segment, CMOS, PQCC44, 0.653 X 0.653 INCH, 0.180 INCH HEIGHT, 0.05 INCH PITCH, GREEN, PLASTIC, MS-018AC, LCC-44
MICROCHIP

HV5122PJ-GM903

EL DISPLAY DRIVER
MICROCHIP

HV5122X

32-Channel Serial To Parallel Converter With Open Drain Outputs
SUPERTEX

HV512GA

IC,SERIAL-TO-PARALLEL CONVERTER,CMOS,BGA,91PIN
MICROCHIP

HV512GA

SIPO Based Peripheral Driver, CMOS, PBGA91, MICRO, BGA-91
SUPERTEX

HV512X

SIPO Based Peripheral Driver, CMOS, DIE
MICROCHIP

HV513

8-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs, POL, Hi-Z, and Short Circuit Detect
SUPERTEX

HV513K7-G

8-Channel Serial to Parallel Converter with High Voltage Push-Pull Outputs, POL, Hi-Z, and Short Circuit Detect
SUPERTEX