SVC75P3B07A [SUNTSU]
Ceramic SMT 6 Pad LVPECL VCXO;型号: | SVC75P3B07A |
厂家: | Suntsu Electronics, Inc. |
描述: | Ceramic SMT 6 Pad LVPECL VCXO 石英晶振 压控振荡器 |
文件: | 总4页 (文件大小:703K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ceramic SMT 6 Pad LVPECL VCXO
SVC75P Series
7.0mm x 5.0mm
Features
• ±±0ppm (Frequency Stability) Available
• Ceramic Package
Applications
• Fiber Channel
• Gigabit Ethernet
• PCI Express
• SONET
• LVPECL
• Fundamental or PLL (Phase Lock Loop) Available
• Tape and Reel
Part Numbering Guide
SVC 75 P 3 A 48 A 2 - 67.500M
FREQUENCY
MHz
TRI-STATE
SUNTSU VCXO
7.0mm x 5.0mm
LVPECL
(ENABLE/DISABLE)
BLANK : No Connect
PULLABILITY
± : Pin ±
A : ±150ppm
B : ±100ppm
C : ±80ppm
D : ±50ppm
OPERATING
SUPPLY VOLTAGE
TEMPERATURE RANGE
± : ±.5V±5%
07 : 0°C - +70°C
3 : 3.3V±5%
FREQUENCY STABILITY
16 : -10°C - +60°C
17 : -10°C - +70°C
±7 : -±0°C - +70°C
38 : -30°C - +85°C
48 : -40°C - +85°C
COMPLIANT
A : ±50ppm
B : ±30ppm
C : ±±5ppm
D : ±±0ppm
*E : ±15ppm
Cage Code: 4GUT4
To customize your parameters contact a Suntsu representative.
* For frequency stability option E contact a Suntsu representative.
Electrical Parameters
Units
Minimum
Typical
Maximum
Remarks
Frequency Range
MHz
9.5
800
Frequency Stability (Includes Initial
Tolerance at ±5°C, Frequency
Stability over Operating
Temperature, Output Load Change,
Supply Voltage Change, and First
Year Aging at ±5°C.)
ppm
-±0
+±0
See part numbering guide for options.
See part numbering guide for options.
Operating Temperature
°C
°C
V
-40
-55
+85
+1±5
±.6±5
3.465
70
Storage Temperature
Supply Voltage (VDD) ±.5V Option
Supply Voltage (VDD) 3.3V Option
Current (IDD) ±.5V Option
±.375
3.135
±.5
3.3
Only available with AT-Cut Fundamental.
Available with AT-Cut Fundamental and PLL.
V
mA
mA
V
Current (IDD) 3.3V Option
80
Current Voltage (VC) ±.5V Option
0.±
0.3
±.3
Current Voltage (VC) 3.3V Option
Pullability
V
ppm
%
3.0
±50
±100
±150
10
See part numbering guide for options.
50 Ω into VDD-±.0VDC
Linearity
Output Load (LVPECL)
Output Logic HIGH Level (VOH)
Output Logic LOW Level (VOL)
Rise (TR) And Fall (TF) Time
Symmetry (Duty Cycle)
Tri-State Input Voltage - Enable
Tri-State Input Voltage - Disable
Start-Up Time
Ω
50
V
VDD-1.0±5
V
VDD-1.6±0
ns
%
0.5
50
1
Measured at ±0% to 80% of Waveform.
No Connection
45
55
V
0.7*VDD
V
0.3*VDD
10
ms
Phase Jitter (1±KHz ~ ±0MHz)
Phase Jitter (1±KHz ~ ±0MHz)
ps
ps
0.4
3
1
AT-Cut Fundamental
PLL (Phase Lock Loop)
5
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMT 6 Pad LVPECL VCXO
SVC75P Series
7.0mm x 5.0mm
Outline Drawing & Land Pattern
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
Test Circuit (LVPECL)
Waveform (LVPECL)
Typical Phase Noise Performance (Measured By Agilent E5052A)
Frequency - 30.720MHz
Frequency - 200.000MHz
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMT 6 Pad LVPECL VCXO
SVC75P Series
7.0mm x 5.0mm
Typical Jitter Performance (Measured By Agilent E5052A)
Frequency - 30.720MHz
Frequency - 200.000MHz
Reflow Profile
Part Marking
Tp (Time At 260°C. 20-40 Sec)
260
Rup (Ramp Up, 3°C/Sec Max)
217
200
TI (Time Above 217°C.
60-150Sec)
150
Rdn (Ramp Down,
6°C/Sec Max)
Ts (Preheat Time.
60-180Sec)
T 25°C to Peak (480Sec Max)
Time (sec)
Tape And Reel Dimensions
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
1,000pcs/Reel
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMT 6 Pad LVPECL VCXO
SVC75P Series
7.0mm x 5.0mm
Environmental Specifications
Mechanical Specifications
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Mechanical Shock
MIL-STD-±0±, Method ±13, Condition B
MIL-STD-883, Method ±007, Condition A
MIL-STD-883, Method 1004
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
Vibration
Gross Leak Test
Moisture Resistance
Solderability
MIL-STD-883, Method ±003
J-STD-0±0, MSL 1
Resistance to Solvents
MIL-STD-±0±, Method ±15
Moisture Sensitivity
Resistance to Soldering Heat
MIL-STD-±0±, Method ±10, Condition K
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
相关型号:
©2020 ICPDF网 联系我们和版权申明