SST75K50F48 [SUNTSU]
Ceramic Stratum 3 SMT 10 Pad Clipped Sinewave (VC)TCXO;型号: | SST75K50F48 |
厂家: | Suntsu Electronics, Inc. |
描述: | Ceramic Stratum 3 SMT 10 Pad Clipped Sinewave (VC)TCXO 石英晶振 温度补偿晶振 |
文件: | 总4页 (文件大小:870K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ceramic Stratum 3 SMT 10 Pad Clipped Sinewave (VC)TCXO
SST75K Series
7.0mm x 5.0mm
Features
• Stratum 3 (Overall ±±.6ppm )
• Clipped Sinewave
• (VC)TCXO
Applications
• Base Stations
• Stratum 3
• Small Cell
• Tape and Reel
Part Numbering Guide
SST 75 K 33 S 48 V F - 16.384M
SUNTSU
STRATUM 3 TCXO
FREQUENCY
MHz
PULLABILITY
7.0mm x 5.0mm
BLANK : TCXO
F : ±8.0ppm
G : ±5.0ppm
CLIPPED SINEWAVE
TCXO/VCTCXO
BLANK : TCXO
OPERATING
SUPPLY VOLTAGE
V : VCTCXO
TEMPERATURE RANGE
33 : 3.3V±5%
FREQUENCY STABILITY
07 : 0°C - +70°C
50 : 5.0V±5%
F : ±0.50ppm
16 : -10°C - +60°C
27 : -20°C - +70°C
±8 : -±0°C - +85°C
S : ±0.37ppm
T : ±0.28ppm
*U : ±0.1±ppm
COMPLIANT
Cage Code: ±GUT±
To customize your parameters contact a Suntsu representative.
* Option U is available only for -20°C to +70°C
Electrical Parameters
Units
Minimum
Typical
Maximum
Remarks
Frequency Range
MHz
5
26
Frequency Tolerance at +25ºC
Freq. Stability vs. Op Temp.
Holdover Stability
ppm
ppm
ppm
°C
-±.6
+±.6
+0.28
+0.37
+85
-0.28
+0.37
-±0
See part numbering guide for options.
See part numbering guide for options.
Operating Temperature
Storage Temperature
°C
-55
+125
3.±65
5.250
6
Supply Voltage (VDD) - 3.3V Option
Supply Voltage (VDD) - 5.0V Option
Current (IDD)
V
3.135
±.750
3.3
5.0
V
mA
V
Voltage (VC, VCTCXO) - 3.3V Option
Voltage (VC, VCTCXO) - 5.0V Option
Pullability (VCTCXO)
0.5
0.5
2.5
V
2.5
ppm
%
±5.0
±8.0
10
See part numbering guide for options.
Linearity (VCTCXO)
Output Load (Clipped Sinewave)
Output Logic Levels
kΩ//pF
VP-P
%
10//10
0.8
±0
Symmetry (Duty Cycle)
50
60
Tri-State Input Voltage (Enabled)
Tri-State Input Voltage (Disabled)
Start-Up Time
V
0.7*VDD
V
0.3*VDD
2
ms
VC Input Impedance (VCTCXO)
Phase Noise (Typical) 100Hz Offset
Phase Noise (Typical) 1KHz Offset
Phase Noise (Typical) 10KHz Offset
kΩ
100
dBc/Hz
dBc/Hz
dBc/Hz
-120
-1±0
-1±8
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic Stratum 3 SMT 10 Pad Clipped Sinewave (VC)TCXO
SST75K Series
7.0mm x 5.0mm
Outline Drawing & Land Pattern
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
Test Circuit (Clipped Sinewave)
Waveform (Clipped Sinewave)
Typical Phase Noise Performance (Measured By Agilent E5052A)
Frequency - 12.288MHz
Frequency - 16.000MHz
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic Stratum 3 SMT 10 Pad Clipped Sinewave (VC)TCXO
SST75K Series
7.0mm x 5.0mm
Typical Jitter Performance (Measured By Agilent E5052A)
Frequency - 12.288MHz
Reflow Profile
Frequency - 16.000MHz
Part Marking
Tp (Time At 260°C. 20-40 Sec)
260
Rup (Ramp Up, 3°C/Sec Max)
217
200
TI (Time Above 217°C.
60-150Sec)
150
Rdn (Ramp Down,
6°C/Sec Max)
Ts (Preheat Time.
60-180Sec)
T 25°C to Peak (480Sec Max)
Time (sec)
Tape And Reel Dimensions
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
1,000pcs/Reel
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic Stratum 3 SMT 10 Pad Clipped Sinewave (VC)TCXO
SST75K Series
7.0mm x 5.0mm
Environmental Specifications
Mechanical Specifications
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Mechanical Shock
MIL-STD-202, Method 213, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 100±
Fine Leak Test
MIL-STD-883, Method 101±, Condition A
MIL-STD-883, Method 101±, Condition C
Vibration
Gross Leak Test
Moisture Resistance
Solderability
MIL-STD-883, Method 2003
J-STD-020, MSL 1
Resistance to Solvents
MIL-STD-202, Method 215
Moisture Sensitivity
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
相关型号:
©2020 ICPDF网 联系我们和版权申明