SLO32P3A071 [SUNTSU]
Ceramic SMD Low Current 6 Pad LVPECL Oscillator;![SLO32P3A071](http://pdffile.icpdf.com/pdf2/p00354/img/icpdf/SLO32P3A381_2174849_icpdf.jpg)
型号: | SLO32P3A071 |
厂家: | ![]() |
描述: | Ceramic SMD Low Current 6 Pad LVPECL Oscillator |
文件: | 总3页 (文件大小:482K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Ceramic SMD Low Current 6 Pad LVPECL Oscillator
SLO32P Series
3.2mm x 2.5mm
Features
Applications
•
20ppm (Frequency Stability) Available
• Fiber Channel
• Ceramic Package
• LVPECL
• Gigabit Ethernet
• PCI Express
• Low Current Consumption
• Fundamental or 3rd Overtone Crystal Design
Part Numbering Guide
SLO 32 P 3 A 48 1 - 156.250M
SUNTSU LOW
CURRENT OSC
FREQUENCY
MHz
TRI-STATE
3.2mm x 2.5mm
LVPECL
SUPPLY VOLTAGE
(ENABLE/DISABLE)
BLANK : No Conection
1 : Pin 1
OPERATING TEMPERATURE
RANGE
07 : 0°C - +70°C
2 : 2.5V 5%
3 : 3.3V 5%
FREQUENCY STABILITY
16 : -10°C - +60°C
17 : -10°C - +70°C
27 : -20°C - +70°C
38 : -30°C - +85°C
48 : -40°C - +85°C
A : 50ppm
B : 30ppm
C : 25ppm
*D : 20ppm
COMPLIANT
Cage Code : 4GUT4
To customize your parameters, contact a Suntsu representative.
* For Frequency stability option D, contact a Suntsu representative.
Electrical Parameters
Units
Minimum
Typical
Maximum
Remarks
Frequency Range
MHz
100
320
Frequency Stability (Includes Initial
Tolerance at 25°C, Frequency Stability
over Operating Temperature, Output Load
Change, Supply Voltage Change, and First
Year Aging at 25°C.)
ppm
-20
+20
See part numbering guide for options
See part numbering guide for options
Operating Temperature
°C
°C
V
-40
-55
+85
+125
2.625
3.465
50
Storage Temperature
Supply Voltage (VDD) - 2.5V Option
Supply Voltage (VDD) - 3.3V Option
Current (IDD)
2.375
3.135
2.5
3.3
V
mA
Ω
V
Output Load (LVPECL)
50
50 Ω into VDD-2.0VDC
Output Logic Levels High (VOH at 2.5V)
Output Logic Levels Low (VOL at 2.5V)
Output Logic Levels High (VOH at 3.3V)
Output Logic Levels Low (VOL at 3.3V)
Rise (TR) and Fall (TF) Time
Symmetry (Duty Cycle)
1.415
0.670
2.215
1.470
1.760
1.195
2.420
1.745
0.3
V
V
V
ns
%
0.15
50
Measured at 20% to 80% of Waveform
No Connection
45
55
Tri-State Input Voltage - Enable
Tri-State Input Voltage - Disable
Start-Up Time
V
0.7*VDD
V
0.3*VDD
ms
fs
5
Phase Jitter (12kHz ~ 20MHz)
120
150
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMD Low Current 6 Pad LVPECL Oscillator
SLO32P Series
3.2mm x 2.5mm
Outline Drawing & Land Pattern
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
Test Circuit (LVPECL)
Waveform (LVPECL)
Tri-State or NC
Typical Phase Noise Performance (Measured By Agilent E5052A)
Frequency - 156.250MHz
Frequency - 156.250MHz
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
Ceramic SMD Low Current 6 Pad LVPECL Oscillator
SLO32P Series
3.2mm x 2.5mm
Reflow Profile
Part Marking
Tp (Time At 260°C. 20-40 Sec)
260
Rup (Ramp Up, 3°C/Sec Max)
217
200
TI (Time Above 217°C.
60-150Sec)
150
Rdn (Ramp Down,
6°C/Sec Max)
Ts (Preheat Time.
60-180Sec)
T 25°C to Peak (480Sec Max)
Time (sec)
Tape And Reel Dimensions
All dimensions are in millimeters (mm) unless otherwise noted. Drawings are not to scale.
3,000pcs/Reel
Environmental Specifications
Mechanical Specifications
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Mechanical Shock
MIL-STD-202, Method 213, Condition B
MIL-STD-883, Method 2007, Condition A
MIL-STD-883, Method 1004
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
MIL-STD-883, Method 1014, Condition C
Vibration
Gross Leak Test
Moisture Resistance
Solderability
MIL-STD-883, Method 2003
J-STD-020, MSL 1
Resistance to Solvents
MIL-STD-202, Method 215
Moisture Sensitivity
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Suntsu Electronics, Inc.
142 TECHNOLOGY DR., SUITE 150
IRVINE, CA 92618
www.suntsu.com
Specifications are subject
to change without notice.
Call: +1-949-783-7300 | Fax: +1-949-783-7301
相关型号:
©2020 ICPDF网 联系我们和版权申明