TS9511IYLT [STMICROELECTRONICS]
Precision rail-to-rail input/output 3 MHz single operational amplifier;型号: | TS9511IYLT |
厂家: | ST |
描述: | Precision rail-to-rail input/output 3 MHz single operational amplifier 放大器 信息通信管理 光电二极管 |
文件: | 总11页 (文件大小:505K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TS9511
Precision rail-to-rail input/output 3 MHz single operational amplifier
Datasheet - production data
Applications
TS9511ILT/TS9511IYLT
• Signal conditioning
• Automotive applications
• Laptop/notebook computers
9
ꢄ
2XW ꢀ
&&ꢅ
• Transformer/line drivers
9
• Personal entertainment (CD players)
• Portable communication (cell phones, pagers)
• Digital-to-analog converter buffers
• Portable headphone speaker drivers
&&ꢆ
,1ꢅ
ꢁ
ꢂ
,1ꢆ
ꢃ
Description
TS9511RILT/TS9511RIYLT
The TS9511 device is a single, precision
rail-to-rail operational amplifier whose supply
voltage range extends from 2.7 V to 12 V.
Its high-precision performance associated with
an SOT23-5 package make it suitable for a wide
range of demanding applications, such as
industrial, automotive, consumer, and computer
applications.
9
ꢄ
ꢃ
2XW ꢀ
&&ꢆ
9
&&ꢅ ꢁ
,1ꢆ
,1ꢅ
ꢂ
Features
• Good precision: 800 µV max.
• Rail-to-rail input and output
• Wide supply voltage range: 2.7 V to 12 V
• High-speed (3 MHz, 1 V/µs)
• Low consumption (900 µA at 3 V)
• Supply voltage rejection ratio: 85 dB
• Micropackage: SOT23-5
July 2013
DocID15707 Rev 6
1/11
This is information on a product in full production.
www.st.com
Contents
TS9511
Contents
1
2
3
Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3.1
SOT23-5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4
5
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2/11
DocID15707 Rev 6
TS9511
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
VCC
Parameter
Supply voltage(1)
Value
14
Unit
Differential input voltage(2)
Vid
±1
V
Input voltage(3)
Vin
Tstg
Tj
VDD-0.3 to VCC+0.3
-65 to +150
150
Storage temperature range
Maximum junction temperature
°C
Thermal resistance junction-to-ambient(4)
SOT23-5
Rthja
250
°C/W
Thermal resistance junction-to-case(4)
SOT23-5
Rthjc
81
1
HBM: human body model(5)
MM: machine model(6)
kV
V
ESD
100
CDM: charged device model(7)
Latch-up immunity
1.5
200
260
kV
mA
°C
Lead temperature (soldering, 10 sec.)
1. All voltage values, except differential voltage, are with respect to network ground terminal.
2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
If Vid > ±1 V, the maximum input current must not exceed ±1 mA. In this case (Vid > ±1 V), an input series
resistor must be added to limit input current.
3. Do not exceed 14 V.
4. Short-circuits can cause excessive heating and destructive dissipation. Rth are typical values.
5. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through
a 1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
6. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
Vicm
Toper
Supply voltage
2.7 to 12
VDD -0.2 to VCC +0.2
-40 to +125
V
Common mode input voltage range
Operating free air temperature range
°C
DocID15707 Rev 6
3/11
11
Electrical characteristics
TS9511
2
Electrical characteristics
Table 3. Electrical characteristics at V = +3 V, V = 0 V , V
= V /2,
CC
CC
DD
icm
R connected to V /2, T
= 25 °C (unless otherwise specified)
L
CC
amb
Symbol
Parameter
Min.
Typ.
Max.
Unit
Input offset voltage
Tmin ≤ Tamb ≤ Tmax
800
1500
Vio
µV
ΔVio/ΔT Input offset voltage drift
2
1
µV/°C
Input offset current
30
80
Iio
Tmin ≤ Tamb ≤ Tmax
nA
dB
Input bias current
Tmin ≤ Tamb ≤ Tmax
30
90
90
70
150
Iib
Common mode rejection ratio
Tmin ≤ Tamb ≤ Tmax
60
55
CMR
Supply voltage rejection ratio, VCC = 2.7 to 3.3 V
65
60
SVR
Tmin ≤ Tamb ≤ Tmax
Large signal voltage gain, Vo = 2 Vpk-pk, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
70
65
80
2.9
80
Avd
High level output voltage, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
2.8
2.8
VOH
V
Low level output voltage, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
250
250
VOL
mV
Isc
Output short-circuit current
10
20
mA
Supply current (per amplifier), no load, Vicm = VCC/2
0.8
1
1.2
ICC
Tmin ≤ Tamb ≤ Tmax
Gain bandwidth product
RL = 10 kΩ, CL = 100 pF
GBP
SR
3
1
MHz
V/µs
Slew rate
RL = 10 kΩ, CL = 100 pF
Phase margin at unit gain
RL = 10k Ω, CL = 100 pF
∅m
Gm
en
58
12
25
0.01
Degrees
dB
Gain margin
RL = 10k Ω, CL = 100 pF
Equivalent input noise voltage
f = 1 kHz
nV
-----------
Hz
Total harmonic distortion
THD
%
Vout = 4 Vpk-pk, F = 10 kHz, AV = 2, RL =10 kΩ
4/11
DocID15707 Rev 6
TS9511
Electrical characteristics
Table 4. Electrical characteristics at V = +5 V, V = 0 V, V
= V /2,
CC
CC
DD
icm
R connected to V /2, T
= 25 °C (unless otherwise specified)
L
CC
amb
Symbol
Parameter
Min.
Typ.
Max.
Unit
Input offset voltage
Tmin ≤ Tamb ≤ Tmax
800
1500
Vio
µV
ΔVio/ΔT Input offset voltage drift
2
µV/°C
Input offset current
Vicm = VCC/2
Iio
1
30
80
Tmin ≤ Tamb ≤ Tmax
nA
dB
Input bias current
Tmin ≤ Tamb ≤ Tmax
30
90
90
70
150
Iib
Common mode rejection ratio
Tmin ≤ Tamb ≤ Tmax
60
55
CMR
SVR
Supply voltage rejection ratio, VCC = 4 to 5 V
65
60
Tmin ≤ Tamb ≤ Tmax
Large signal voltage gain, Vo = 2 Vpk-pk, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
75
70
86
4.8
80
Avd
High level output voltage, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
4.7
4.7
VOH
V
Low level output voltage, RL = 600 Ω
Tmin ≤ Tamb ≤ Tmax
300
300
VOL
Isc
mV
Output short-circuit current
10
20
mA
Supply current (per amplifier), no load, Vicm = VCC/2
0.95
1.2
1.3
ICC
Tmin ≤ Tamb ≤ Tmax
Gain bandwidth product
RL = 10 kΩ, CL = 100 pF
GBP
SR
3
1
MHz
V/μs
Slew rate
RL = 10 kΩ, CL = 100 pF
Phase margin at unit gain
RL = 10k Ω, CL = 100 pF
∅m
Gm
en
61
13
25
0.01
Degrees
dB
Gain margin
RL = 10k Ω, CL =100 pF
Equivalent input noise voltage
f = 1 kHz
nV
-----------
Hz
Total harmonic distortion
Vout = 4 Vpk-pk, F = 10 kHz, AV = 2, RL = 10 kΩ
THD
%
DocID15707 Rev 6
5/11
11
Electrical characteristics
TS9511
Figure 1. Supply current vs. supply voltage
Figure 2. Supply current vs. temperature
Figure 3. Output short-circuit current vs. output
voltage
Figure 4. Output short-circuit current vs.
temperature
Figure 5. Voltage gain and phase vs. frequency, Figure 6. Voltage gain and phase vs. frequency,
R = 600 Ω, C = 100 pF R = 10 kΩ, C = 100 pF
L
L
L
L
6/11
DocID15707 Rev 6
TS9511
Electrical characteristics
Figure 7. Slew rate vs. temperature
Figure 8. THD + noise vs. V , R = 600 Ω
out
L
Figure 9. THD + noise vs. V , R = 2 kΩ
Figure 10. THD + noise vs. frequency
out
L
Figure 11. Equivalent input noise voltage vs. frequency
DocID15707 Rev 6
7/11
11
Package information
TS9511
3
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK is an ST trademark.
8/11
DocID15707 Rev 6
TS9511
Package information
3.1
SOT23-5 package information
Figure 12. SOT23-5 package outline
Table 5.
SOT23-5 package mechanical data
Dimensions
Symbol
Millimeters
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
A1
A2
B
0.90
1.20
1.45
0.15
1.30
0.50
0.20
3.00
0.035
0.047
0.057
0.006
0.051
0.019
0.008
0.118
0.90
0.35
0.09
2.80
1.05
0.40
0.15
2.90
1.90
0.95
2.80
1.60
0.35
0.035
0.013
0.003
0.110
0.041
0.015
0.006
0.114
0.075
0.037
0.110
0.063
0.013
C
D
D1
e
E
2.60
1.50
3.00
1.75
0.102
0.059
0.118
0.069
F
L
0.10
0.60
0.004
0.023
K
0 degrees
10 degrees
0 degrees
10 degrees
DocID15707 Rev 6
9/11
11
Ordering information
TS9511
4
Ordering information
Table 6.
Order codes
Temperature
Order code
Package
Packing
Marking
range
TS9511ILT
K1A1
K1A3
K1A2
K1A4
SOT23-5L
TS9511RILT
TS9511IYLT(1)
TS9511RIYLT(1)
-40 °C to +125 °C
Tape and reel
SOT23-5L
(automotive grade)
1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001
and Q 002 or equivalent.
5
Revision history
Table 7.
Document revision history
Revision
Date
Changes
25-Jun-2009
17-Dec-2009
1
2
Initial release.
Modified CMR, SVR, Avd, VOH, VOL, ISC and ICC values in Table 3 and
Table 4.
Updated title of Figure 8 and Figure 9 (added conditions).
Updated TS9511IYLT order code (qualified status) in Table 6.
Minor corrections throughout document.
19-Sep-2012
23-Nov-2012
3
4
Updated Table 5
Updated markings of Table 6
Added two new order codes: TS9511RILT and TS9511RIYLT with
associated new pinout configuration.
17-Jul-2013
25-Jul-2013
5
6
Table 6: added footnote 1.
Updated pinout numbers in cover page.
10/11
DocID15707 Rev 6
TS9511
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID15707 Rev 6
11/11
11
相关型号:
TS9511RILT
OP-AMP, 1500uV OFFSET-MAX, 3MHz BAND WIDTH, PDSO5, ROHS COMPLIANT, SOT-23, 5 PIN
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明