TL071BCD/BCDT [STMICROELECTRONICS]
Low noise JFET single operational amplifier; 低噪声JFET单通道运算放大器
| 型号： | TL071BCD/BCDT |
| 厂家： | 
ST |
| 描述： | Low noise JFET single operational amplifier |
| 文件： | 总15页 (文件大小：309K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TL071
Low noise JFET single operational amplifier
Features
+
■ Wide common-mode (up to V
) and
CC
differential voltage range
■ Low input bias and offset currenT
N
DIP8
■ Low noise e = 15 nV/ √Hz (typ)
n
(Plastic package)
■ Output short-circuit protection
■ High input impedance JFET input stage
■ Low harmonic distortion: 0.01 % (typ)
■ Internal frequency compensation
■ Latch-up free operation
D
SO-8
■ High slew rate: 16 V /µs (typ)
(Plastic micropackage)
Description
Pin connections
The TL071 is a high-speed JFET input single
operational amplifier. This JFET input operational
amplifier incorporates well matched, high-voltage
JFET and bipolar transistors in a monolithic
integrated circuit.
(Top view)
1
2
3
4
8
7
6
5
The device features high slew rates, low input
bias and offset currents, and low offset voltage
temperature coefficient.
1 - Offset null 1
2 - Inverting input
3 - Non-inverting input
-
4 - V
CC
5 - Offset null 2
6 - Output
+
7 - V
CC
8 - N.C.
September 2008
Rev 3
1/15
www.st.com
15
Schematic diagram
TL071
1
Schematic diagram
Figure 1.
Circuit schematics
VCC
Non-inverting
input
Inverting
input
100
Ω
200
Ω
Output
100
Ω
30k
8.2k
100
Ω
1.3k
1.3k
35k
35k
VCC
Offset Null1
Offset Null2
Figure 2.
Input offset voltage null circuit
TL071
N2
N1
100k
Ω
VCC
2/15
TL071
Absolute maximum ratings and operating conditions
2
Absolute maximum ratings and operating conditions
Table 1.
Symbol
Absolute maximum ratings
Value
Parameter
Unit
TL071M, AM, BM TL071I, AI, BI TL071C, AC, BC
VCC
Vi
Supply voltage (1)
18
15
30
V
V
V
Input voltage (2)
Vid
Differential input voltage (3)
Thermal resistance junction to
ambient(4) (5)
Rthja
125
85
°C/W
°C/W
SO-8
DIP8
Thermal resistance junction to
case(4) (5)
Rthjc
40
41
SO-8
DIP8
Output short-circuit duration (6)
Operating free-air temperature range
Storage temperature range
HBM: human body model(7)
MM: machine model(8)
Infinite
Toper
Tstg
-55 to +125
-40 to +105
-65 to +150
500
0 to +70
°C
°C
V
ESD
200
V
CDM: charged device model(9)
1500
V
1. All voltage values, except differential voltage, are with respect to the zero reference level (ground) of the supply voltages
-
where the zero reference level is the midpoint between VCC+ and VCC
.
2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less.
3. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from simultaneous short-circuits on all
amplifiers.
5. Rth are typical values.
6. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure
that the dissipation rating is not exceeded.
7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin
combinations with other pins floating.
8. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device
with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.
9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to
the ground.
Table 2.
Symbol
Operating conditions
Parameter
TL071I, AI, BI TL071C, AC, BC
Unit
VCC
Supply voltage
6 to 36
V
Toper
Operating free-air temperature range
-40 to +105
0 to +70
°C
3/15
Electrical characteristics
TL071
3
Electrical characteristics
Table 3.
Symbol
V
= 1ꢀV, T
= +2ꢀ°C (unless otherwise specified)
CC
amb
TL071I,M,AC,AI,AM,
BC,BI,BM
TL071C
Parameter
Unit
Min. Typ. Max. Min. Typ. Max.
Input offset voltage (Rs = 50Ω)
Tamb = +25°C
TL071
TL071A
TL071B
3
3
1
10
6
3
13
7
3
10
13
Vio
mV
Tmin ≤ Tamb ≤ Tmax TL071
TL071A
TL071B
5
DVio
Iio
Input offset voltage drift
10
5
10
5
μV/°C
Input offset current
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
100
4
100
10
pA
nA
Input bias current (1)
Iib
Tamb = +25°C
Tmin ≤Tamb ≤Tmax
20
200
86
200
20
20
200
86
200
20
pA
nA
Large signal voltage gain (RL= 2kΩ, Vo= 10V)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
Avd
V/mV
dB
50
25
25
15
Supply voltage rejection ratio (RS = 50Ω)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
SVR
80
80
70
70
Supply current, no load
ICC
Vicm
CMR
mA
V
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
1.4
2.5
2.5
1.4
2.5
2.5
11
+15
-12
11
+15
-12
Input common mode voltage range
Common mode rejection ratio (RS = 50Ω)
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
dB
80
80
86
40
70
70
86
40
Output short-circuit current
Ios
mA
Tamb = +25°C
Tmin ≤ Tamb ≤ Tmax
10
10
60
60
10
10
60
60
Output voltage swing
Tamb = +25°C
RL = 2kΩ
10
12
10
12
12
13.5
10
12
10
12
12
13.5
Vopp
V
RL = 10kΩ
Tmin ≤ Tamb ≤ Tmax RL = 2kΩ
RL = 10kΩ
Slew rate
SR
8
16
8
16
V/μs
Vin = 10V, RL = 2kΩ, CL = 100pF, unity gain
4/15
TL071
Electrical characteristics
= +2ꢀ°C (unless otherwise specified) (continued)
Table 3.
V
= 1ꢀV, T
CC amb
TL071I,M,AC,AI,AM,
BC,BI,BM
TL071C
Symbol
Parameter
Unit
Min. Typ. Max. Min. Typ. Max.
Rise time
tr
0.1
10
0.1
10
μs
Vin = 20mV, RL = 2kΩ, CL = 100pF, unity gain
Overshoot
Kov
%
Vin = 20mV, RL = 2kΩ, CL = 100pF, unity gain
Gain bandwidth product
GBP
Ri
2.5
4
2.5
4
MHz
W
Vin = 10mV, RL = 2kΩ, CL = 100pF, f= 100kHz
Input resistance
1012
1012
Total harmonic distortion,
THD
f= 1kHz, RL= 2kΩ,CL = 100pF, Av = 20dB,
0.01
0.01
%
Vo = 2Vpp
)
Equivalent input noise voltage
nV
en
15
45
15
45
-----------
RS = 100Ω, f = 1KHz
Hz
degrees
∅m
Phase margin
1. The input bias currents are junction leakage currents which approximately double for every 10°C increase in the junction
temperature.
5/15
Electrical characteristics
TL071
Figure 3.
Figure ꢀ.
Figure 7.
Maximum peak-to-peak output
voltage versus frequency
Figure 4.
Figure 6.
Figure 8.
Maximum peak-to-peak output
voltage versus frequency
Maximum peak-to-peak output
voltage versus frequency
Maximum peak-to-peak output
voltage versus free air temp.
Maximum peak-to-peak output
voltage versus load resistance
Maximum peak-to-peak output
voltage versus supply voltage
30
25
= 10 k
Ω
RL
Tamb = +25˚C
20
15
10
5
0
2
4
6
8
10
14
16
12
SUPPLY VOLTAGE ( V)
6/15
TL071
Electrical characteristics
Figure 9.
Input bias current versus free air
temperature
Figure 10. Large signal differential voltage
amplification versus free air temp.
100
1000
400
VCC
15V
=
200
100
10
1
40
20
VCC
VO
=
15V
10V
10
0.1
=
4
2
L = 2k
Ω
R
0.01
1
-75 -50
-25
0
25
50
75
125
-50
-25
0
25
50
75
100
125
100
TEMPERATURE (˚C)
TEMPERATURE (˚C)
Figure 11. Large signal differential voltage
amplification and phase shift
versus frequency
Figure 12. Total power dissipation versus free
air temperature
250
VCC
225
200
175
150
125
100
75
15V
=
100
180
DIFFERENTIAL
VOLTAGE
AMPLIFICATION
(left scale)
No signal
No load
PHASE SHIFT
(right scale)
10
1
90
0
R
C
V
T
= 2k
W
= 100pF
L
L
= 15V
= +125°C
CC
amb
50
25
0
1K
10K
100K
1M
10M
100
-75 -50
-25
0
50
75
100 125
25
FREQUENCY (Hz)
TEMPERATURE (˚C)
Figure 13. Supply current per amplifier versus Figure 14. Common mode rejection ratio
free air temperature versus free air temperature
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
89
88
VCC
15V
RL
= 10 k
Ω
=
No signal
No load
VC C
=
15V
87
86
85
84
83
-75 -50
-25
0
25
50
75 100
125
-75 -50
-25
0
50
75
100 125
25
TEMPERATURE (˚C)
TEMPERATURE (˚C)
7/15
Electrical characteristics
TL071
Figure 1ꢀ. Voltage follower large signal pulse Figure 16. Output voltage versus elapsed time
response
6
4
28
24
20
16
12
8
OUTPUT
OVERSHOOT
INPUT
90%
2
0
VCC
=
15V
-2
VCC
=
15V
= 2 k
W
RL
4
0
R L
= 2k
Ω
C
T
L= 100pF
10%
-4
-6
Tamb
= +25˚C
amb = +25°C
t r
-4
0
0.5
1
1.5
2
2.5
3
3.5
0.3
TIME (
0.5
0.6
0
0.1
0.2
0.4
s)
0.7
μ
TIME ( s)
m
Figure 17. Equivalent input noise voltage
versus frequency
Figure 18. Total harmonic distortion versus
frequency
70
1
=
= 10
= 100
= +25˚C
15V
VCC
A V
R S
V
=
15V
CC
60
0.4
= 1
A V
V
O
50
40
30
Ω
= 6V
(rms)
0.1
Tamb
T
= +25˚C
amb
0.04
0.01
20
0.004
10
0
0.001
10
40
100
400 1k
4k 10k
40k 100k
100
400
1k
4k
10k
40k
100k
FREQUENCY (Hz)
FREQUENCY (Hz)
Parameter measurement information
Figure 19. Voltage follower
Figure 20. Gain-of-10 inverting amplifier
10k
Ω
1k
Ω
-
-
eI
-
e
TL071
o
e
TL071
o
CL= 100pF
eI
R
= 2kΩ
L
R
CL= 100pF
L
8/15
TL071
Typical applications
4
Typical applications
Figure 21. (0.ꢀ Hz) Square wave oscillator
R
= 100k
Ω
F
+15V
3.3k
Ω
-
TL0 71
1k
Ω
-15V
C F= 3.3
μF
Ω
3.3k
9.1k
Ω
1
f osc=
2 x R
F C F
Figure 22. High Q notch filter
-
TL071
R1
R2
1
f o
=
= 1kHz
2 x R
C F
F
C3
C3
C1 = C2 =
= 100pF
R3
2
R1 = R2 = 2R3 = 1.5M
Ω
C1
C2
9/15
Package information
TL071
ꢀ
Package information
In order to meet environmental requirements, STMicroelectronics offers these devices in
®
ECOPACK packages. These packages have a lead-free second level interconnect. The
category of second level interconnect is marked on the package and on the inner box label,
in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics
trademark. ECOPACK specifications are available at: www.st.com.
10/15
TL071
Package information
ꢀ.1
DIP8 package information
Figure 23. DIP8 package mechanical drawing
Table 4.
Ref.
DIP8 package mechanical data
Millimeters
Dimensions
Inches
Min.
Typ.
Max.
Min.
Typ.
Max.
A
A1
A2
b
5.33
0.210
0.38
2.92
0.36
1.14
0.20
9.02
7.62
6.10
0.015
0.115
0.014
0.045
0.008
0.355
0.300
0.240
3.30
0.46
1.52
0.25
9.27
7.87
6.35
2.54
7.62
4.95
0.56
1.78
0.36
10.16
8.26
7.11
0.130
0.018
0.060
0.010
0.365
0.310
0.250
0.100
0.300
0.195
0.022
0.070
0.014
0.400
0.325
0.280
b2
c
D
E
E1
e
eA
eB
L
10.92
3.81
0.430
0.150
2.92
3.30
0.115
0.130
11/15
Package information
TL071
ꢀ.2
SO-8 package information
Figure 24. SO-8 package mechanical drawing
Table ꢀ.
Ref.
SO-8 package mechanical data
Millimeters
Dimensions
Inches
Typ.
Min.
Typ.
Max.
Min.
Max.
A
A1
A2
b
1.75
0.25
0.069
0.010
0.10
1.25
0.28
0.17
4.80
5.80
3.80
0.004
0.049
0.011
0.007
0.189
0.228
0.150
0.48
0.23
5.00
6.20
4.00
0.019
0.010
0.197
0.244
0.157
c
D
4.90
6.00
3.90
1.27
0.193
0.236
0.154
0.050
E
E1
e
h
0.25
0.40
0.50
1.27
0.010
0.016
0.020
0.050
L
L1
k
1.04
0.040
1°
8°
1°
8°
ccc
0.10
0.004
12/15
TL071
Ordering information
6
Ordering information
Table 6.
Order codes
Temperature
Part number
Package
Packing
Marking
range
TL071IN
TL071IN
TL071AIN
TL071BIN
TL071AIN
TL071BIN
DIP8
Tube
-40°C, +105°C
TL071ID/IDT
071I
071AI
071BI
Tube or
tape & reel
TL071AID/AIDT
TL071BID/BIDT
SO-8
DIP8
TL071CN
TL071CN
TL071ACN
TL071BCN
TL071ACN
TL071BCN
Tube
0°C, +70°C
TL071CD/CDT
071C
071AC
071BC
Tube or
tape & reel
TL071ACD/ACDT
TL071BCD/BCDT
SO-8
SO-8
TL071IYD/DT(1)
TL071AIYD/DT(1)
TL071BIYD/DT(1)
071IY
Tube or tape &
reel
-40°C, +105°C
071AIY
071BIY
(Automotive
grade)
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 & Q 002 or equivalent are on-going.
13/15
Revision history
TL071
7
Revision history
Table 7.
Date
Document revision history
Revision
Changes
29-Mar-2001
1
Initial release.
Added values for Rthja, Rthjc and ESD in Table 1: Absolute maximum
ratings.
Added Table 2: Operating conditions.
Expanded Table 6: Order codes.
Format update.
30-Jul-2007
2
Corrected ESD HBM value in Table 1: Absolute maximum ratings.
Added L1 parameter in Table 5: SO-8 package mechanical data.
Added missing order codes for automotive grade products in
Table 6: Order codes.
19-Sep-2008
3
Removed information concerning military temperature ranges
(TL071Mx, TL071AMx, TL071BMx) in Table 6.
14/15
TL071
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2008 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
15/15
相关型号：
TL071BCJG
OP-AMP, 5000uV OFFSET-MAX, 3MHz BAND WIDTH, CDIP8, 0.300 INCH, HERMETIC SEALED, CERAMIC, DIP-8
TI
©2020 ICPDF网 联系我们和版权申明