STPS15LCD80CR [STMICROELECTRONICS]
Rectifier Diode;
| 型号： | STPS15LCD80CR |
| 厂家： | 
ST |
| 描述： | Rectifier Diode 二极管 |
| 文件： | 总18页 (文件大小：307K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STPS15LCD80C
Datasheet
Power Schottky rectifier
A1
A2
Features
K
K
•
•
•
High junction temperature capability
Avalanche capability specified
Insulated package: TO-220FPAB
A2
K
TO-220AB
A2
TO-220FPAB
A1
K
A1
–
Insulating voltage = 2000 VRMS sine
K
•
ECOPACK®2 compliant component for D²PAK, I²PAK, TO-220AB and
TO-220FPAB on demand
I²PAK
A2
K
A1
K
K
Description
This device is a dual Schottky rectifier suited for high frequency switch mode power
supply.
K
K
A2
A2
A1
A1
D²PAK
Available in TO-220AB, TO-220FPAB, I2PAK and D2PAK, this device is intended to
be used in LCD screens or adaptors providing such applications with good efficiency
at both low and high load.
Product status
STPS15LCD80C
Product summary
I
2 x 7.5 A
80 V
F(AV)
V
RRM
T (max)
175 °C
0.635 V
j
V (typ)
F
DS7077 - Rev 3 - April 2018
www.st.com
For further information contact your local STMicroelectronics sales office.
STPS15LCD80C
Characteristics
1
Characteristics
Table 1. Absolute ratings (limiting values, per diode, at Tamb 25 °C, unless otherwise stated)
Symbol
Parameter
Value
80
Unit
V
V
Repetitive peak reverse voltage
Forward rms current
RRM
I
30
A
F(RMS)
T
C
T
C
T
C
T
C
= 145 °C Per diode
= 140 °C Per device
= 120 °C Per diode
= 85 °C Per device
7.5
15
2
2
TO-220AB,D PAK, I PAK
Average forward current δ = 0.5, square
wave
I
A
F(AV)
7.5
15
TO-220FPAB
I
Surge non repetitive forward current
Repetitive peak avalanche power
Storage temperature range
t = 10 ms sinusoidal
120
190
A
FSM
p
P
t = 10 µs, T = 125 °C
W
ARM
p
j
T
-65 to + 175 °C
+ 175 °C
stg
Maximum operating junction temperature (1)
T
j
1. (dP /dT ) < (1/R
) condition to avoid thermal runaway for a diode on its own heatsink.
th(j-a)
tot
j
Table 2. Thermal parameter
Parameter
Symbol
Value
Unit
2
2
3.50
TO-220AB, D PAK, I PAK
Per diode
TO-220FPAB
6.50
2.15
R
Junction to case
Coupling
°C/W
°C/W
th(j-c)
2
2
TO-220AB, D PAK, I PAK
Total
-
TO-220FPAB
5.05
0.80
2
2
TO-220AB, D PAK, I PAK
R
th(c)
TO-220FPAB
3.60
When the diodes 1 and 2 are used simultaneously:
ΔTj (diode1) = P(diode1) x Rth(j-c) (per diode) + P(diode2) x Rth(c)
DS7077 - Rev 3
page 2/18
STPS15LCD80C
Characteristics
Table 3. Static electrical characteristics (per diode)
Symbol
Parameter
Test conditions
T = 25 °C
Min.
Typ.
2.5
Max.
10
Unit
µA
-
-
-
-
-
-
j
(1)
V
= V
I
R
Reverse leakage current
Forward voltage drop
R
RRM
T = 125 °C
j
2.3
7
mA
T = 25 °C
0.795
0.635
0.995
0.725
0.855
0.680
1.110
0.820
j
I = 10 A
F
T = 125 °C
j
(2)
V
V
F
T = 25 °C
j
I = 20 A
F
T = 125 °C
j
1. Pulse test: t = 5 ms, δ < 2%
p
2. Pulse test: t = 380 µs, δ < 2%
p
To evaluate the conduction losses, use the following equation:
2
P = 0.540 x IF(AV) + 0.0187 IF
(RMS)
DS7077 - Rev 3
page 3/18
STPS15LCD80C
Characteristics (curves)
1.2
Characteristics (curves)
Figure 1. Average forward power dissipation versus
average forward current (per diode)
Figure 2. Average forward current versus ambient
temperature (δ = 0.5, per diode)
PF(AV)(W)
7
IF(AV)(A)
9
8
7
6
5
4
3
2
1
0
δ = 0.1
δ = 0.05
δ = 0.2
δ = 1
δ = 0.5
Rth(j-a)=Rth(j-c)
6
5
4
3
2
1
0
TO-220AB / I²PAK / D²PAK
TO-220FPAB
T
tp
=tp/T
Tamb(°C)
δ
IF(AV)(A)
0
1
2
3
4
5
6
7
8
9
10
0
25
50
75
100
125
150
175
Figure 3. Normalized avalanche power derating versus
pulse duration (Tj = 125 °C)
Figure 4. Relative variation of thermal impedance junction
to case versus pulse duration (TO-220AB, D2PAK,I2PAK)
PARM(t
)
p
Zth(j-c) / R
th(j-c)
PARM(10 µs)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
1
0.1
0.01
0.001
0.3
Single pulse
0.2
tp(µs)
0.1
tp(s)
0.0
1.E-04
1
10
100
1000
1.E-03
1.E-02
1.E-01
1.E+00
Figure 5. Relative thermal impedance junction to case
versus pulse duration (TO-220FPAB)
Figure 6. Reverse leakage current versus reverse voltage
applied (typical values, per diode)
IR(µA)
1.E+05
Zth(j-c) / Rth(j-c)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
T = 150 °C
j
1.E+04
1.E+03
1.E+02
1.E+01
1.E+00
1.E-01
T = 125 °C
j
T = 100 °C
j
T = 75 °C
j
T = 50 °C
j
0.3
Single pulse
T = 25 °C
j
0.2
0.1
tp(s)
VR(V)
0.0
1.E-03
1.E-02
1.E-01
1.E+00
1.E+01
0
10
20
30
40
50
60
70
80
DS7077 - Rev 3
page 4/18
STPS15LCD80C
Characteristics (curves)
Figure 7. Junction capacitance versus reverse voltage
applied (typical values, per diode)
Figure 8. Forward voltage drop versus forward current
(per diode)
IFM(A)
15.0
C(pF)
1000
F = 1 MHz
VOSC = 30 mVRMS
13.5
Tj=125°C
(Maximum values)
12.0
Tj = 25 °C
10.5
9.0
Tj=125°C
(Typical values)
7.5
100
6.0
Tj=25°C
(Maximum values)
4.5
3.0
1.5
VFM(V)
VR(V)
0.0
10
1
10
100
0.0
0.2
0.4
0.6
0.8
1.0
1.2
DS7077 - Rev 3
page 5/18
STPS15LCD80C
Package information
2
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions
and product status are available at: www.st.com. ECOPACK® is an ST trademark.
DS7077 - Rev 3
page 6/18
STPS15LCD80C
TO-220AB package information
2.1
TO-220AB package information
•
•
•
•
Cooling method: by conduction (C)
Epoxy meets UL 94,V0
Recommended torque value: 0.55 N·m
Maximum torque value: 0.7 N·m
Figure 9. TO-220AB package outline
DS7077 - Rev 3
page 7/18
STPS15LCD80C
TO-220AB package information
Table 4. TO-220AB package mechanical data
Dimensions
Millimeters
Ref.
Inches
Max.
Min.
4.40
0.61
1.14
0.48
15.25
Max.
4.60
0.88
1.55
0.70
15.75
Min.
0.173
0.240
0.045
0.019
0.600
A
b
0.181
0.035
b1
c
0.061
0.028
D
0.620
D1
E
1.27 typ.
0.050 typ.
0.409
10.00
2.40
4.95
1.23
6.20
2.40
13.00
3.50
10.40
2.70
5.15
1.32
6.60
2.72
14.00
3.93
0.394
0.094
0.195
0.048
0.244
0.094
0.512
0.138
e
0.106
e1
F
0.203
0.052
H1
J1
L
0.260
0.107
0.551
L1
L20
L30
θP
Q
0.155
16.40 typ.
28.90 typ.
0.646 typ.
1.138 typ.
0.152
3.75
2.65
3.85
2.95
0.148
0.104
0.116
DS7077 - Rev 3
page 8/18
STPS15LCD80C
TO-220FPAB package information
2.2
TO-220FPAB package information
•
•
•
•
Cooling method: by conduction (C)
Epoxy meets UL 94,V0
Recommended torque value: 0.55 N·m
Maximum torque value: 0.7 N·m
Figure 10. TO-220FPAB package outline
A
B
H
Dia.
L6
L2
L7
L3
F1
F2
L4
D
F
E
G1
G
DS7077 - Rev 3
page 9/18
STPS15LCD80C
TO-220FPAB package information
Table 5. TO-220FPAB package mechanical data
Dimensions
Ref.
Millimeters
Inches (for reference only)
Min.
4.40
2.5
Max.
4.60
2.7
Min.
Max.
A
B
0.1739
0.0988
0.0988
0.0178
0.0296
0.0455
0.0455
0.1957
0.0949
0.3953
0.1818
0.1067
0.1087
0.0277
0.0395
0.0672
0.0672
0.2055
0.1067
0.4111
D
2.50
0.45
0.75
1.15
1.15
4.95
2.40
10.00
2.75
0.70
1.0
E
F
F1
F2
G
1.70
1.70
5.20
2.70
10.40
G1
H
L2
L3
L4
L5
L6
L7
Dia
16.00 typ.
30.60
0.6324 typ.
1.2095
28.60
9.80
2.90
15.90
9.00
3.0
1.1304
0.3874
0.1146
0.6285
0.3557
0.1186
10.6
3.60
16.40
9.30
3.20
0.4190
0.1423
0.6482
0.3676
0.1265
DS7077 - Rev 3
page 10/18
STPS15LCD80C
I²PAK package information
2.3
I²PAK package information
•
•
Cooling method: by conduction (C)
Epoxy meets UL 94,V0
Figure 11. I²PAK package outline
DS7077 - Rev 3
page 11/18
STPS15LCD80C
I²PAK package information
Table 6. I²PAK package mechanical data
Dimensions
Millimeters
Ref.
Inches
Max.
Min.
4.40
2.40
0.61
1.14
0.49
1.23
8.95
2.40
4.95
10.00
13.00
3.50
1.27
Max.
4.60
2.72
0.88
1.70
0.70
1.32
9.35
2.70
5.15
10.40
14.00
3.93
1.40
Min.
A
A1
b
0.173
0.094
0.024
0.044
0.019
0.048
0.352
0.094
0.195
0.394
0.512
0.138
0.050
0.181
0.107
0.035
0.067
0.028
0.052
0.368
0.106
0.203
0.409
0.551
0.155
0.055
b1
c
c2
D
e
e1
E
L
L1
L2
DS7077 - Rev 3
page 12/18
STPS15LCD80C
D²PAK package information
2.4
D²PAK package information
•
•
Cooling method: by conduction (C)
Epoxy meets UL 94,V0
Figure 12. D²PAK package outline
DS7077 - Rev 3
page 13/18
STPS15LCD80C
D²PAK package information
Table 7. D²PAK package mechanical data
Dimensions
Millimeters
Ref.
Inches
Max.
0.181
0.010
0.037
0.067
0.027
0.053
0.368
0.311
0.060
0.415
0.346
0.282
0.100
0.205
0.624
0.112
0.110
0.065
0.070
0.015
8°
Min.
4.36
0.00
0.70
1.14
0.38
1.19
8.60
6.90
1.10
10.00
8.10
6.85
Max.
4.60
0.25
0.93
1.70
0.69
1.36
9.35
8.00
1.50
10.55
8.90
7.25
Min.
A
A1
b
0.172
0.000
0.028
0.045
0.015
0.047
0.339
0.272
0.043
0.394
0.319
0.266
b2
c
c2
D
D1
D2
E
E1
E2
e
2.54 typ.
e1
H
4.88
15.00
2.49
1.90
1.27
1.30
5.28
15.85
2.90
2.79
1.65
1.78
0.190
0.591
0.097
0.075
0.049
0.050
J1
L
L1
L2
R
0.4 typ.
V2
0°
8°
0°
DS7077 - Rev 3
page 14/18
STPS15LCD80C
D²PAK package information
Figure 13. D²PAK Recommended footprint
16.90
12.20
5.08
2.54
1.60
3.50
9.75
DS7077 - Rev 3
page 15/18
STPS15LCD80C
Ordering information
3
Ordering information
Table 8. Ordering information
Order code
Marking
STPS15LCD80C
Package
TO-220AB
Weight
Base qty
Delivery mode
Tube
STPS15LCD80CT
STPS15LCD80CFP
STPS15LCD80CR
1.95 g
1.9 g
1.5 g
50
50
50
STPS15LCD80C
STPS15LCD80C
TO-220FPAB
Tube
2
Tube
I PAK
2
STPS15LCD80CG-TR
STPS15LCD80C
1.38 g
1000
Tape and reel
D PAK
DS7077 - Rev 3
page 16/18
STPS15LCD80C
Revision history
Table 9. Document revision history
Changes
Date
Revision
13-Jan-2011
1
2
First issue.
16-Jun-2015
Updated features, and packages silhouette in cover page. Updated Section 2: "Characteristics" and
Section 2.1:"Characteristics (curves)". Updated Section 3.2: "D²PAK package information".
16-Apr-2018
3
Updated Table 6. I²PAK package mechanical data.
DS7077 - Rev 3
page 17/18
STPS15LCD80C
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS7077 - Rev 3
page 18/18
相关型号：
©2020 ICPDF网 联系我们和版权申明