ST7FOXA0-DRAIS [STMICROELECTRONICS]
Raisonances complete, low-cost starter kits for STM8 and ST7;
| 型号： | ST7FOXA0-DRAIS |
| 厂家： | 
ST |
| 描述： | Raisonances complete, low-cost starter kits for STM8 and ST7 |
| 文件： | 总6页 (文件大小：220K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STM8-SK/RAIS STM8-D/RAIS
ST7-SK/RAIS ST7-D/RAIS
Raisonance’s complete, low-cost starter kits for STM8 and ST7
Data brief
Features
Embedded RLink
■ USB interface to host PC
■ In-circuit debugging and programming
■ Application board connection via ST SWIM,
ICC or JTAG
REva motherboard
■ 1 standard SO-DIMM connector to plug in
daughterboards
■ Digital and analog I/O evaluation features,
including on-board LEDs, buttons, switches,
external analog connector, temperature sensor
and potentiometer
■ I²C EEPROM and bus
■ RS-232 driver and 2 DB9 connectors
■ Prototype area
Description
The REva starter kits are Raisonance’s complete,
cost-effective solutions for starting application
development and evaluating STM8x, ST7LITEx,
ST7Fox, ST7232x, ST7234x, ST7236x and
ST7263B microcontrollers.
■ VDD settings for 1.8 V, 3.3 V and 5 V
microcontrollers
■ USB powered, no external power required
Kits contain all the hardware and software
required to develop applications for
Interchangeable REva daughterboard
■ Features different STM8 and ST7 MCUs to
permit application development for a wide
range of devices and may include additional
device specific features
microcontrollers, including the REva evaluation
board, target STM8 and ST7 microcontrollers,
embedded RLink for in-circuit debugging and in-
circuit programming and the raisonance
integrated development environment (Ride7) with
application builder.
Raisonance software
■ Ride7: Editor, SIMICE simulator, Rbuilder, C
compiler, debugger, Project manager, and
CodeCompressor
■ RFlasher7 device programming interface
April 2013
Doc ID 11271 Rev 6
1/6
For further information contact your local STMicroelectronics sales office.
www.st.com
6
Architecture
STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS
Architecture
Embedded RLink: In-circuit debugging and programming tool that uses SWIM for the
STM8, in-circuit communication (ICC) for the ST7 and supports the JTAG protocol. It
interfaces with the host PC via a USB connection.
REva mother board: Universal evaluation board designed for quick and easy evaluation of
2
a complete range of features (I/Os, ADC, SPI, CAN, I C...) for a variety of STM8 and ST7s.
It is powered from the RLink’s USB connection to the host PC.
REva daughterboards: Interchangeable boards featuring different STM8 and ST7
microcontrollers, make it easy to evaluate and develop applications for a complete range of
MCUs from a single evaluation platform. All boards have a clock source selection jumper,
and an oscillator footprint. See Table 1 and Table 2 for details.
Raisonance’s software: RLink can be driven by Raisonance’s Ride7 or RFlasher7.
●
Ride7: Drives the RLink and offers seamless control of software development tools
(project manager, editor, compiler, assembler, linker, debugger, etc.) from an intuitive
graphical interface. It offers full integration of the relevant C/C++ toolsets, project
management, code editor and SIMICE instruction set simulator. Ride7 includes:
–
RBuilder allows users to rapidly configure device peripherals in a GUI and
generate the C source code for peripherals at the click of a button without writing a
single line of code
–
–
SIMICE simulator
Raisonance STM8 and ST7 C compiler, free download version allows compiling
up to 2 Kbytes code (Effective Date: April 1st, 2013).
–
–
–
–
High-level language debugging
Project manager
Color syntax highlighting editor
Free downloads of evaluation versions with unlimited debugging from
www.raisonance.com
–
The optional CodeCompressor allows post-link optimization of the entire
applications code using optimizations like in-lining, factorizing and peepholing,
which can reduce application code by 5 to 15%.
●
RFlasher7: Raisonance’s easy-to-use device programming interface drives RLink and
allows users to erase, program, view and verify microcontroller memory. RFlasher7
also includes automated mode for automatic execution of programming sequences for
mass programming and project mode that allows users to save their programming
configurations. In this operating mode, tasks become intuitive and can be achieved with
only a few clicks such as:
–
–
–
–
Flash memory erasing and programming,
Flash or RAM memory dumping,
blank check, programming verifications,
mass programming process.
2/6
Doc ID 11271 Rev 6
STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS
REva starter kits
REva starter kits
REva boards can be purchased in the starter kit format, as shown in Table 1.
REva standalone daughterboards are also available independently from
STMicroelectronics, as shown in Table 2.
Table 1.
Raisonance starter kits for the STM8 and ST7
Starter kit
(order code)
Daughterboard
ID marking
MCU family
supported
MCU
package
Additional features(1)
MCU device
STM8S105
STM8S103/5 STM8S105C6
STM8S207/8 STM8S208RB
LQFP48
LQFP64
LQFP32
DIP16
STM8/128-SK/RAIS STM8S208RB
STM8S903
STM8S903
ST7Ultralite0 ST7FLITEU0
ST7FLITE0
ST7FLIT1xB ST7FLIT19BF1 SO20
STM8S903K3
ST7LITEU0
ST7LITE0
ST7FLITE-SK/RAIS
ST7LITE1B
ST7FLITE09Y0 SO16
ST7LITE3
ST7FLITE3
ST72321
ST72324/5
ST7234x
ST7FLITE39F2 SO20
ST72F321BAR9 LQFP64
ST72F325AR9 LQFP64
ST72321B
ST7232X-SK/RAIS
ST72325
ST72345
ST72F34X-SK/RAIS
ST72264
ST72F345C4
ST72F264G2
LQFP48
S028
ST7226x
ST72361
ST7256X
ST2F36X-SK/RAIS ST72361
ST2F63B-SK/RAIS ST7263B
ST72F361AR9 LQFP64
Clock source selection jumper
USB mini-B connector
ST7260
ST7263B
ST72F63BH6
LQFP48
24 MHz oscillator
1. All kits have a clock source selection jumper, and an oscillator footprint unless stated otherwise.
Doc ID 11271 Rev 6
3/6
Ordering information
STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS
Table 2.
Raisonance standalone daughterboards for the STM8 and ST7
Standalone
daughterboard
(order code)
Daughterboard
ID marking
MCU family
supported
MCU
package
Additional features(1)
MCU device
STM8S/32-D/RAIS STM8S105
STM8S103/5 STM8S105C6
STM8S207/8 STM8S208RB
LQFP48
LQFP64
LQFP32
STM8/128-D/RAIS
STM8S/8-D/RAIS
STM8S208RB
STM8S903
STM8S903
STM8S903K3
ST7FLIT1B-D/RAIS ST7LITE1B
ST7FLITU0-D/RAIS ST7LITEU0
ST7FLITUS-D/RAIS ST7LITEUS5
ST7FLIT1xB ST7FLIT19BF1 SO20
ST7Ultralite0 ST7FLITEU0
ST7UltraliteS ST7FLITEUS
DIP16
DIP16
ST7FLI49-D/RAIS
ST7FLI49
ST7FLITE4
ST7FLITE4M ST7FLI49MK1
ST72321 ST72F321BAR9 LQFP64
ST72324/25 ST72F325AR9 LQFP64
ST7FLITE49K2 LQFP32
ST7FLI49M-D/RAIS ST7LITE4M
ST72321B-D/RAIS ST72321B
LQFP32
ST72325-D/RAIS
ST72345-D/RAIS
ST72325
ST72345
ST7234x
ST72F345C4
ST7FOXA0
ST7FOXK2
LQFP48
DIP16
ST7FOXA0-D/RAIS ST7FOXA0
ST7FOXK2-D/RAIS ST7FOXK2
ST7FOXA0
ST7FOXK2
LQFP32
1. All kits have a clock source selection jumper, and an oscillator footprint unless stated otherwise.
Ordering information
REva starter kits and Raisonance development tools can be ordered from Raisonance or
from your nearest ST Distributor or sales office.
The REva starter kits are available for a full range of 32-bit and 8-bit microcontrollers. For
more information refer to www.st.com/mcu.
For more information, documentation and downloads, please refer to www.raisonance.com.
For more information about which microcontrollers are supported, refer to
www.raisonance.com or the STMicroelectronics microcontroller support site, www.st.com.
4/6
Doc ID 11271 Rev 6
STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS
Revision history
Revision history
Table 3.
Date
Document revision history
Revision
Changes
01-Mar-2005
24-Aug-2005
1
2
Initial release.
Added part number ST7232x-SK/RAIS and ST7LITE1B daughterboard.
Added part number ST72F34X-SK/RAIS, ST72F36X-SK/RAIS and ST72F63B-
SK/RAIS.
21-June-2006
21-Jul-2008
3
4
Added daughterboard features to Table 1.
Added STM8 microcontroller family to supported devices.
Updated the Raisonance’s software paragraph, replaced Table 1 with Tables 1 and
2, and reformatted the document.
09-Apr-2010
22-Apr-2013
5
6
Added STM8S105 and STM8S903 daughterboards to Table 1 and Table 2.
Updated information on Raisonance STM8 and ST7 C compiler in Architecture.
Modified Ordering information.
Doc ID 11271 Rev 6
5/6
STM8-SK/RAIS STM8-D/RAIS ST7-SK/RAIS ST7-D/RAIS
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE
IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH
PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR
ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED
FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN
WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE,
AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS.
PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE
CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
6/6
Doc ID 11271 Rev 6
相关型号：
ST7FOXA0B6
8-BIT, FLASH, 8MHz, MICROCONTROLLER, PDIP8, 0.300 INCH, ROHS COMPLIANT, PLASTIC, DIP-8
STMICROELECTR
ST7FOXA0M6
8-BIT, FLASH, 8MHz, MICROCONTROLLER, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8
STMICROELECTR
ST7FOXA0M6TR
8-BIT, FLASH, 8MHz, MICROCONTROLLER, PDSO8, 0.150 INCH, ROHS COMPLIANT, PLASTIC, SOP-8
STMICROELECTR
ST7FOXK1T6TR
8-BIT, FLASH, 8MHz, MICROCONTROLLER, PQFP32, 7 X 7 MM, LEAD FREE, LQFP-32
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明