LM4041BECT-1.2 [STMICROELECTRONICS]
Precision micropower shunt voltage reference;型号: | LM4041BECT-1.2 |
厂家: | ST |
描述: | Precision micropower shunt voltage reference 光电二极管 |
文件: | 总16页 (文件大小:646K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LM4041
Precision micropower shunt voltage reference
Datasheet
-
production data
Description
The LM4041 is a micropower shunt voltage
reference, providing a stable 1.225 V output
voltage, with an initial accuracy of 0.1% @ 25 °C
and a low temperature coefficient. Available in
SOT323-5L and SOT23-3L surface mount
packages, it can be designed in applications
where space saving is a critical issue. The low
operating current is a key advantage for power
restricted designs. In addition, the LM4041 is very
stable and can be used in a broad range of
application conditions.
SOT323-5L
SOT23-3L
Features
• Fixed 1.225 V typical output voltage
• Ultra low operating current: 40 µA at 25 °C
• High precision: +/- 0.1% @ 25 °C (0.2%, 0.5%
and 1% versions are also available)
• Stable when used with capacitive loads
• Industrial (- 40 to+ 85 °C) and Extended (- 40
to +125 °C) temperature range versions
available
• 100 ppm/°C maximum temperature coefficient
• Available in SOT23-3L and SOT323-5L
packages
Applications
• Computers
• Battery chargers
• Switch mode power supply
• Battery operated equipment
• Data acquisition systems
• Energy management
• Instrumentation
February 2014
DocID018817 Rev 4
1/16
This is information on a product in full production.
www.st.com
Contents
LM4041
Contents
1
2
3
4
5
6
7
8
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Typical performance characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
DocID018817 Rev 4
LM4041
Pin configuration
1
Pin configuration
Figure 1. Pin connection (top view)
$0ꢀꢁꢂꢃꢅYꢄ
$0ꢀꢁꢂꢃꢃYꢄ
627ꢀꢁꢂꢁ/
627ꢁꢀꢁꢂꢃ/
Note:
Below pins must be left floating or connected to Anode pin to improve noise immunity due to
PCB layout.
SOT23-3L: pin 3.
SOT323-5L: pin 2, pin 4 and pin 5.
DocID018817 Rev 4
3/16
16
Maximum ratings
LM4041
2
Maximum ratings
Table 1. Absolute maximum ratings
Parameter
Symbol
Value
Unit
IK
VK
IF
Reverse breakdown current
20
8
mA
V
Maximum cathode voltage
Forward current
10
mA
Power dissipation (1)
SOT23-3L
PD
500
536
mW
SOT323-5L
TSTG
Storage temperature
- 65 to +150
2
°C
kV
V
Human body model (HBM)
Machine model (MM)
ESD
200
Charged device model
1500
260
V
TLEAD
TJ
Lead temperature (soldering) 10 sec
Max junction temperature
°C
°C
+150
1.
P
has been calculated with T
= 25°C and T
= 150 °C.
JMAX
D
AMB
Note:
Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions is not implied.
Table 2. Thermal data
Symbol
Parameter
SOT323-5L
SOT23-3L
Unit
RthJA
RthJC
Thermal resistance junction-ambient
Thermal resistance junction-case
233
90
248
136
°C/W
°C/W
Table 3. Operating conditions
Parameter
Symbol
Value
Unit
IKMIN
Minimum operating current
Maximum operating current
40
µA
IKMAX
12
mA
Industrial
Extended
- 40 to + 85
- 40 to + 125
TOPER
Operating free air temperature range
°C
4/16
DocID018817 Rev 4
LM4041
Electrical characteristics
3
Electrical characteristics
TAMB = 25 °C, unless otherwise specified.
Table 4. Electrical characteristics
Test conditions
Ik = 100 µA
Symbol
Parameter
Min.
Typ.
Max.
Unit
LM4041A, 0.1%
LM4041B, 0.2%
LM4041C, 0.5%
LM4041D, 1%
1.2238
1.2262
Reverse breakdown
voltage
Vk
1.2225 1.225 1.2275
V
1.219
1.213
1.231
1.237
Tamb = 25 °C
25
40
50
Minimum operating
current
Ikmin
µA
(1)
-40 °C < Tamb < Tmax
Average temperature
coefficient (2)
ΔVk/ΔT
Ik = 100 µA
± 36
0.4
4
± 100 ppm/°C
Ikmin < Ik < 1 mA
1
(1)
(1)
Reverse breakdown
- 40 °C < Tamb < Tmax
1.5
mV
8
ΔVk/ΔIk voltage change with
1 mA < Ik < 12 mA
operating current range
- 40 °C < Tamb < Tmax
10
Rka
Kvh
en
Static impedance
ΔIk = 100 µA to 1 mA
0.4
120
60
1
W
Long term stability
Ik = 100 µA, t = 1000 hrs
ppm
Wide band noise
Ik = 100 µA, 10 Hz < f < 10 kHz
µVRMS
1.
T
= 85 °C for LM4041xI (industrial version) and T
= 125 °C for LM4041xE (extended version).
max
max
6
2. The average temperature coefficient is defined as: 10 x {max(
Δ
V )
/
[Vk@25°C x (
T
-T )]} [ppm/°C].
max min
k
Note:
Limits are 100% production tested at 25 °C. Limits over temperature are guaranteed
through correlation and by design.
DocID018817 Rev 4
5/16
16
Typical performance characteristics
LM4041
4
Typical performance characteristics
The following plots are referred to the typical application circuit and, unless otherwise noted,
at TA = 25 °C.
Figure 2. Vk change vs. temperature
Figure 3. Minimum current for regulation
AM09372v1
AM09371v1
1240
1235
1230
1225
1220
1215
1210
70
50
30
10
-40
-20
0
25
50
85
105
125
TEMP (°C)
0.4
0.8
1.2
VK (V)
Figure 4. Output impedance vs. frequency
Figure 5. Minimum current for regulation vs.
temperature
AM09373v1
1000
AM09374v1
60
50
40
30
20
10
0
Theoric C=1µF
100
C = 0
10
I = 150µA
CL=1µF
1
I = 1mA
-40
-20
0
25
50
85
105
125
0.1
TEMP (°C)
100
1000
10000
100000
1000000
Frequency (Hz)
6/16
DocID018817 Rev 4
LM4041
Typical performance characteristics
Figure 6. Startup characteristics
Figure 7. Startup measure circuit
R
18 K
IK
VK
Pulse
Generator
f=100 KHz
AM09375v1
Figure 8. Wideband noise voltage
AM09376v1
1200
1000
800
600
400
200
0
10
100
1000
10000
100000
Frequency (Hz)
DocID018817 Rev 4
7/16
16
Package mechanical data
LM4041
5
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions, and product status are available at: www.st.com.
ECOPACK is an ST trademark.
Figure 9. SOT23-3L dimensions
7110469_B
8/16
DocID018817 Rev 4
LM4041
Package mechanical data
Table 5. SOT23-3L mechanical data
mm.
Dim.
Min.
Typ.
Max.
A
A1
A2
b
0.89
0.01
0.88
0.30
0.08
2.80
2.10
1.20
1.12
0.10
1.02
0.50
0.20
3.04
2.64
1.40
0.95
2.90
c
D
E
E1
e
1.30
0.95
1.90
0.50
0.54
e1
L
0.40
0°
0.60
8°
L1
k
DocID018817 Rev 4
9/16
16
Package mechanical data
LM4041
Figure 10. SOT323-5L dimensions
7091413/E
10/16
DocID018817 Rev 4
LM4041
Package mechanical data
Table 6. SOT323-5L mechanical data
mm.
Dim.
Min.
Typ.
Max.
A
A1
A2
b
0.80
0
1.10
0.10
1
0.80
0.15
0.10
1.80
1.80
1.15
0.90
0.30
0.22
2.20
2.40
1.35
c
D
2
E
2.10
1.25
0.65
1.30
0.36
E1
e
e1
L
0.26
0°
0.46
8°
<
DocID018817 Rev 4
11/16
16
Packaging mechanical data
LM4041
6
Packaging mechanical data
Figure 11. Tape and reel SOT23-3L and SOT323-5L mechanical drawing
12/16
DocID018817 Rev 4
LM4041
Packaging mechanical data
Table 7. Tape and reel SOT23-3L mechanical data
mm
Dim.
Min.
Typ.
Max.
A
C
180
12.8
20.2
60
13.0
13.2
D
N
T
14.4
3.33
3.27
1.47
4.1
Ao
Bo
Ko
Po
P
3.13
3.07
1.27
3.9
3.23
3.17
1.37
4.0
3.9
4.0
4.1
Table 8. SOT323-5L mechanical data
mm.
Dim.
Min.
Typ.
Max.
A
C
175
12.8
20.2
59.5
180
13
185
13.2
D
N
60
60.5
14.4
T
Ao
Bo
Ko
Po
P
2.25
2.7
1.2
4
3.9
3.8
4.1
4.2
4
DocID018817 Rev 4
13/16
16
Order codes
LM4041
7
Order codes
Table 9. Order codes
Order codes
Precision
Packages
Operating temperature range
Marking
LM4041AICT-1.2
LM4041BICT-1.2
LM4041CICT-1.2
LM4041DICT-1.2
LM4041AILT-1.2
LM4041BILT-1.2
LM4041CILT-1.2
LM4041DILT-1.2
LM4041AECT-1.2
LM4041BECT-1.2
LM4041CECT-1.2
LM4041DECT-1.2
LM4041AELT-1.2
LM4041BELT-1.2
LM4041CELT-1.2
LM4041DELT-1.2
0.1%
0.2%
0.5%
1%
L2
L2
Industrial
SOT323-5L
- 40 to + 85 °C
L25
L26
L23
L24
L25
L26
E2
0.1%
0.2%
0.5%
1%
Industrial
SOT23-3L
SOT323-5L
SOT23-3L
- 40 to + 85 °C
0.1%
0.2%
0.5%
1%
E2
Extended
- 40 to + 125 °C
E25
E26
E23
E24
E25
E26
0.1%
0.2%
0.5%
1%
Extended
- 40 to + 125 °C
14/16
DocID018817 Rev 4
LM4041
Revision history
8
Revision history
Table 10. Document revision history
Changes
Date
Revision
09-May-2011
05-Dec-2011
25-Jul-2012
1
2
3
Initial release.
Changed maturity code and updated Table 9 on page 14.
Added: marking order codes Table 9 on page 14.
Part number LM4041xx changed to LM4041.
Updated Table 1: Absolute maximum ratings, Section 1: Pin configuration and
Section 5: Package mechanical data.
18-Feb-2014
4
Added Section 6: Packaging mechanical data.
Minor text changes.
DocID018817 Rev 4
15/16
16
LM4041
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
16/16
DocID018817 Rev 4
相关型号:
LM4041BEM3-1.2+T
Two Terminal Voltage Reference, 1 Output, 1.225V, BICMOS, PDSO3, ROHS COMPLIANT, SOT-23, 3 PIN
MAXIM
©2020 ICPDF网 联系我们和版权申明