LDP01-XXAY [STMICROELECTRONICS]
Automotive TVS for load dump protection;型号: | LDP01-XXAY |
厂家: | ST |
描述: | Automotive TVS for load dump protection 电视 |
文件: | 总11页 (文件大小:457K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LDP01-xxAY
Automotive TVS for load dump protection
Datasheet
-
production data
Description
.
The LDP01-xxAY Transil™ series have been
designed to protect automotive sensitive circuits
against surges defined in ISO 7637-2 and
ISO 16750 tests A and B also called load-dump.
The planar technology makes it compatible with
high-end circuits where low leakage current and
high junction temperature are required to provide
reliability and stability over time.
'ð3$.
$
$
%RWKꢀDQRGHVꢀPXVWꢀEHꢀFRQQHFWHG
LDP01-xxAY is packaged in D²PAK.
Features
Table 1. Device summary
• Stand-off voltage range: from 22 to 70 V
• Low leakage current: 1 μA at 25 °C
• Operating Tj max: 175 °C
Breakdown voltage
(VBR at IR = 1 mA)
Part number
min.
typ.
V
max.
• High power capability at Tj max
• JEDEC registered package outline
• ROHS and Halogen free
LDP01-26AY
LDP01-28AY
LDP01-30AY
LDP01-33AY
LDP01-35AY
LDP01-39AY
LDP01-42AY
LDP01-47AY
LDP01-50AY
LDP01-56AY
LDP01-68AY
LDP01-82AY
24.4
26.7
28.9
31.1
33.3
36.7
40
26
28
30
33
35
39
42
47
50
56
68
82
27.0
29.5
31.9
34.3
36.9
40.5
44.2
49
• Resin meets UL 94, V0
• AEC-Q101 compliant
Complies with the following standards:
• IEC 61000-4-2 exceeds level 4
-
30 kV (air discharge)
-
30 kV (contact discharge)
44.4
47.8
53.3
64.4
77.8
• ISO10605 – C = 330 pF, R = 330
Ω
-
30 kV (air discharge)
52.8
58.9
71.2
86
-
30 kV (contact discharge)
• ISO 7637-2
-
Pulse 1: VS = -150 V
-
Pulse 2a: VS = +112 V
-
-
-
Pulse 3a: Vs = -220 V
Pulse 3b: Vs = +150 V
Formerly pulses 5a and 5b
• ISO 16750-2
-
Tests A and B
October 2015
DocID026556 Rev 2
1/11
This is information on a product in full production.
www.st.com
Characteristics
LDP01-xxAY
1
Characteristics
Table 2. Absolute maximum ratings (Tamb = 25 °C)
Parameter
Symbol
Value
Unit
ISO 10605 (C = 330 pF, R = 330
– contact discharge
– air discharge
Ω
)
30
30
VPP
Peak pulse voltage
kV
IEC 61000-4-2
– contact discharge
– air discharge
30
30
Tstg
Tj
Storage temperature range
-65 to + 175
-55 to + 175
260
°C
°C
°C
Operating junction temperature range
TL
Maximum lead temperature for soldering during 10 s
Table 3. Thermal parameter
Parameter
Symbol
Maximum
Unit
Rth(j-c) Junction to case
D2PAK
0.24
°C/W
Figure 1. Electrical characteristics (definitions)
I
IF
Parameter
Symbol
VBR
=
=
=
=
=
Breakdown voltage
Clamping voltage
VCL
VF
VCLVBR VRM
IRM
Leakage current at VRM
V
IRM
VRM
IPP
Stand-off voltage
Peak pulse current
VF
Rd
aT
=
=
=
Forward voltage drop
Dynamic impedance
Slope: 1/Rd
IPP
Voltage temperature
Figure 2. Pulse definition for electrical characteristics
% I
PP
100
Pulse waveform
t
t
= rise (µs)
= pulse duration time (µs)
r
p
50
0
t
t
t
p
r
2/11
DocID026556 Rev 2
LDP01-xxAY
Order code
Characteristics
Table 4. Electrical characteristics (parameter)
VCL at IPP
VCL at IPP
8/20 µs
(2)
(1)
T(3)
RD
IRM max. at VRM
25 °C 175 °C
VBR at IR
(2)
⍺
RD
8/20 µs
10/1000 µs
10/1000
µs
min. typ. max.
V
max.
max.
max.
µA
V
mA
V
A
m
Ω
V
A
m
Ω
10-4/°C
LDP01-26AY
LDP01-28AY
LDP01-30AY
LDP01-33AY
LDP01-35AY
LDP01-39AY
LDP01-42AY
LDP01-47AY
LDP01-50AY
LDP01-56AY
LDP01-68AY
LDP01-82AY
1
1
1
1
1
1
1
1
1
1
1
1
100 22 24.4 26 27.0
100 24 26.7 28 29.5
100 27 28.9 30 31.9
100 28 31.1 33 34.3
100 30 33.3 35 36.9
100 33 36.7 39 40.5
1
1
1
1
1
1
1
1
1
1
1
1
36 140
40 120
40 125
43.5 110
45.5 95
51.5 85
64
42 1400
45 1250
49 1400
56 1250
11
9.6
9.7
88
65
12
12
17
20
24
27
29
31
40
63
89
9.7
75
9.8
91
60
1150
9.9
129
166
215
276
356
495
771
66 1050
71 1000
76.5 950
10
100 36 40
42 44.2
49
57
63
77
65
55
48
42
35
10
100 40 44.4 47
10.1
10.2
10.3
10.4
10.5
100 43 47.8 50 52.8
100 48 53.3 56 58.9
100 58 64.4 68 71.2
68
81
90
900
770
620
76
92
110
100 70 77.8 82
86
113
135 550
1. Pulse test: t < 50 ms
P
2. To calculate maximum clamping voltage at other surge level, use the following formula: V max = R x I + V max
CL
D
PP
BR
3. To calculate V or V versus junction temperature, use the following formulas:
BR
CL
V
V
at T = V at 25 °C x (1 +
⍺
⍺
T x (T - 25))
BR
CL
j
BR
j
at T = V at 25 °C x (1 +
T x (T - 25))
j
CL
j
Figure 3. Peak pulse power dissipation versus Figure 4. Peak pulse power versus exponential
initial junction temperature (LDP01-30AY) pulse duration (LDP01-30AY)
P
(kW)
1000
100
10
PP
6
5
4
3
2
1
0
T
J
initial = 25 °C
PPP (kW)
LDP01-30AY
10/1000 µs
1
T (°C )
j
tp (ms)
0.1
0
25
50
75
100
125
150
175
200
0.01
0.1
1
10
100
DocID026556 Rev 2
3/11
11
Characteristics
LDP01-xxAY
Figure 5. ISO7637-2, pulse 5a definition
Figure 6. Load dump capability (LDP01-30AY
Us = f(Ri) pulse 5a)
td
13.5+70 13.5+75
13.5 V + Us (V)
13.5+65
13.5+55 13.5+60
13.5+40
13.5+30 13.5+35
0.5
13.5+45 13.5+50
0.6
0.7
Us
0.8
0.9
1
1.1
1.2
1.3
10%
Battery voltage
1.4
1.5
13.5 V
t
Figure 7. ISO7637-2, pulse 5b definition
Figure 8. Load dump capability (LDP01-30AY
Us* = f(Ri) pulse 5b, Us = 87 V)
td
Us
13.5+60 13.5+65
13.5 V + Us* (V)
13.5+55
13.5+30
13.5+45 13.5+50
13.5+35 13.5+40
13.5+20 13.5+25
0.5
0.6
0.7
0.8
0.9
1
td = 150ms
td = 300ms
1.1
td = 400ms
Us
10%
Battery voltage
*
1.2
1.3
1.4
1.5
13.5 V
0
t
Figure 9. ISO 16750-2, test A definition
Figure 10. Load dump capability (LDP01-30AY
Us = f(Ri), Test A)
td
30 35 40 45 50 55 60 65 70 75 80 85 90
0.5
Us
U
(V)
s
0.6
0.7
0.8
0.9
1
td
=
400
td
1.1
1.2
1.3
1.4
1.5
=
ms
300
t
d =
ms
150
0.1 (Us – UA)
UA
ms
Battery voltage
t
0
4/11
DocID026556 Rev 2
LDP01-xxAY
Characteristics
Figure 11. ISO 16750-2, test B definition
Figure 12. Load dump capability (LDP01-30AY
Us* = f(Ri) Test B, Us = 87 V)
td
30
35
40
45
50
55
60
65
70
75
80
Us
0.5
Us* (V)
0.6
0.7
0.8
0.9
1
Us*
td
=
300
ms
1.1
1.2
1.3
1.4
1.5
10%
Battery voltage
UA
t
Figure 13. Clamping voltage versus peak pulse
current (maximum values)
Figure 14. ISO 16750-2 test B response
(UA + Us* = 13.5 + 30 V, Us = 87 V, td = 400 ms,
Ri = 0.5
Ω
)
,
ꢁ$ꢂ
33
ꢅꢃꢃꢃꢃ
ꢅꢃꢃꢃ
ꢅꢃꢃ
ꢅꢃꢎꢅꢃꢃꢃꢀV
ꢇꢎꢆꢃꢀV
LQLWLDOꢀ ꢀꢆꢊꢀ&
7
M
37.2 V
16.9 A
547 W
VCL (5 V/div)
ꢅꢃ
ꢅ
IPP (5 A/div)
PPP (200 W/div)
50 ms/div
9
ꢁ9ꢂ
&/
ꢃꢄꢅ
ꢆꢇ
ꢈꢇ
ꢉꢇ
ꢊꢇ
ꢋꢇ
ꢌꢇ
ꢇꢇ
ꢍꢇ
ꢅꢃꢇ ꢅꢅ ꢇ ꢅꢆꢇ ꢅꢈꢇ
Figure 15. Peak forward voltage versus peak
forward current (typical values)
Figure 16. Leakage current versus junction
temperature (typical values)
I
(A)
FM
I
(nA)
R
100.0
10.0
1.0
10000
1000
100
10
V
= V
RM
R
LDP01-30AY
T
T
initial = 25 °C
initial = 175 °C
j
j
T (°C)
j
V
(V)
FM
Pulse duration 2 ms
1
0.1
25
50
75
100
125
150
175
0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9
1
1.1 1.2
DocID026556 Rev 2
5/11
11
Characteristics
LDP01-xxAY
Figure 17. Relative variation of thermal impedance junction to case versus pulse duration
Z
( °C/W)
th(j-c)
0.25
0.2
0.15
0.1
Both anodes connected
0.05
0
t (s)
p
1.E-05
1.E-04
1.E-03
1.E-02
1.E-01
1.E+00
More information available in AN2689 on www.st.com: Protection of automotive electronics
from electrical hazards, guidelines for design and component selection.
6/11
DocID026556 Rev 2
LDP01-xxAY
Package information
2
Package information
•
Epoxy meets UL94, V0
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at:www.st.com.
ECOPACK® is an ST trademark.
Figure 18. D2PAK dimension definitions
A
E
C2
L2
D
L
L3
A1
B2
R
C
B
G
A2
M
*
V2
* Flat zone no less than 2mm
DocID026556 Rev 2
7/11
11
Package information
LDP01-xxAY
Table 5. D2PAK dimension values
Dimensions
Ref.
Millimeters
Inches
Min.
Max.
Min.
Max.
A
A1
A2
B
4.40
2.49
0.03
0.70
1.14
0.45
1.23
8.95
10.00
4.88
15.00
1.27
1.30
2.29
4.60
2.69
0.23
0.93
1.70
0.60
1.36
9.35
10.40
5.28
15.85
1.40
1.75
2.79
0.173
0.098
0.001
0.027
0.045
0.017
0.048
0.352
0.393
0.192
0.590
0.050
0.051
0.090
0.181
0.106
0.009
0.037
0.067
0.024
0.054
0.368
0.409
0.208
0.624
0.055
0.069
0.110
B2
C
C2
D
E
G
L
L2
L3
M
R
0.40 typ.
0.016 typ.
V2
0°
8°
0°
8°
Figure 19. Footprint (dimensions in mm)
16.90
12.2
5.08
2.54
1.60
3.50
9.75
8/11
DocID026556 Rev 2
LDP01-xxAY
Package information
Figure 20. Marking
â
xxxx
xxxx
XXXX : Marking
Z : Manufacturing location
Y : Year
WW : week
z
y w w
DocID026556 Rev 2
9/11
11
Ordering information
LDP01-xxAY
3
Ordering information
Table 6. Ordering information
Order code
Marking
Package
Weight
Base qty Delivery mode
LDP01-26AY
LDP01-28AY
LDP01-30AY
LDP01-33AY
LDP01-35AY
LDP01-39AY
LDP01-42AY
LDP01-47AY
LDP01-50AY
LDP01-56AY
LDP01-68AY
LDP01-82AY
LDP01-26AY
LDP01-28AY
LDP01-30AY
LDP01-33AY
LDP01-35AY
LDP01-39AY
LDP01-42AY
LDP01-47AY
LDP01-50AY
LDP01-56AY
LDP01-68AY
LDP01-82AY
D²PAK
1.38 g
1000
Tape and reel
4
Revision history
Table 7. Document revision history
Changes
Date
Revision
26-Nov-2014
1
Initial release.
Added wildcard character in part number on the cover page.
Updated Figure 4.
01-Oct-2015
2
Minor text changes.
10/11
DocID026556 Rev 2
LDP01-xxAY
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
DocID026556 Rev 2
11/11
11
相关型号:
©2020 ICPDF网 联系我们和版权申明