L78L09ABZ-TR [STMICROELECTRONICS]
9V FIXED POSITIVE REGULATOR, BCY3, ROHS COMPLIANT, TO-92, 3 PIN;
| 型号： | L78L09ABZ-TR |
| 厂家： | 
ST |
| 描述： | 9V FIXED POSITIVE REGULATOR, BCY3, ROHS COMPLIANT, TO-92, 3 PIN |
| 文件： | 总47页 (文件大小：771K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
L78L
Positive voltage regulators
Datasheet
-
production data
Description
The L78L series of three-terminal positive
regulators employ internal current limiting and
thermal shutdown, making them essentially
indestructible. If adequate heat-sink is provided,
they can deliver up to 100 mA output current.
They are intended as fixed voltage regulators in a
wide range of applications including local or on-
card regulation for elimination of noise and
distribution problems associated with single-point
regulation. In addition, they can be used with
power pass elements to make high-current
voltage regulators. The L78L series used as
Zener diode/resistor combination replacement,
offers e improvement along with lower quiescent
current and lower noise.
72ꢀꢂꢃ
62ꢀꢁ
627ꢀꢁꢂ
Features
• Output current up to 100 mA
• Output voltages of 3.3; 5; 6; 8; 9; 10; 12; 15; 18;
24 V thermal overload protection
• Short-circuit protection
• No external components are required
• Available in either ± 4% (A) or ± 8% (C)
selection
April 2014
DocID2145 Rev 22
1/47
This is information on a product in full production.
w
Contents
L78L
Contents
1
2
3
4
5
6
7
Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Typical performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7.1
7.2
7.3
TO-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
SO-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
SOT-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
8
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
8.1
8.2
8.3
Tape and reel for TO-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Tape and reel for SO-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Tape and reel for SOT-89 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
9
Order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
10
2/47
DocID2145 Rev 22
L78L
Diagram
1
Diagram
Figure 1. Schematic diagram
DocID2145 Rev 22
3/47
47
Pin configuration
L78L
2
Pin configuration
Figure 2. Pin connection (top view, bottom view for TO-92)
PIN 1 = VOUT
PIN 2 = GND
PIN 3 = VIN
SO-8
TO-92
SOT-89
Figure 3. Test circuits
4/47
DocID2145 Rev 22
L78L
Maximum ratings
3
Maximum ratings
Table 1. Absolute maximum ratings
Parameter
Symbol
Value
Unit
VO = 3.3 to 9 V
VO = 12 to 15 V
VO = 18 to 24 V
30
35
VI
DC Input voltage
V
40
IO
PD
Output current
100
mA
Power dissipation
Internally limited (1)
mW
°C
TSTG
Storage temperature range
-65 to 150
for L78LxxAC /
L78LxxC
0 to 125
TOP
Operating junction temperature range
°C
for L78LxxAB
-40 to 125
1. Our SO-8 package used for voltage regulators is modified internally to have pins 2, 3, 6 and 7 electrically communed to the
die attach flag. This particular frame decreases the total thermal resistance of the package and increases its ability to
dissipate power when an appropriate area of copper on the printed circuit board is available for heat-sinking. The external
dimensions are the same as for the standard SO-8.
Table 2. Thermal data
Symbol
Parameter
SO-8
TO-92
SOT-89
Unit
RthJC
RthJA
Thermal resistance junction-case (max)
Thermal resistance junction-ambient (max)
20
15
°C/W
°C/W
55 (1)
200
55 (1)
1. Considering 6 cm² of copper Board heat-sink.
DocID2145 Rev 22
5/47
47
Electrical characteristics
L78L
4
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C, VI = 8.3 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 3. Electrical characteristics of L78L33C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
O = 1 to 40 mA, VI = 5.3 to 20 V
3.036
2.97
2.97
3.3
3.564
3.63
3.63
150
100
60
V
I
Output voltage
V
IO = 1 to 70 mA, VI = 8.3 V
VI = 5.3 to 20 V, TJ = 25 °C
VI = 6.3 to 20 V, TJ = 25 °C
IO = 1 to 100 mA, TJ = 25 °C
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
DVO
DVO
Id
Line regulation
mV
mV
Load regulation
30
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.2
1.5
I
O = 1 to 40 mA
DId
mA
VI = 6.3 to 20 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
40
49
µV
dB
V
VI = 6.3 to 16.3 V, f = 120 Hz
41
IO = 40 mA, TJ = 25 °C
1.7
6/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C, VI = 10 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 4. Electrical characteristics of L78L05C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
4.6
4.5
4.5
5
5.4
5.5
5.5
200
150
60
V
IO = 1 to 40 mA, VI = 7 to 20 V
IO = 1 to 70 mA, VI = 10 V
VI = 8.5 to 20 V, TJ = 25 °C
VI = 9 to 20 V, TJ = 25 °C
Output voltage
V
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
30
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.2
1.5
I
O = 1 to 40 mA
DId
mA
VI = 8 to 20 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
40
49
µV
dB
V
VI = 9 to 20 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
40
1.7
DocID2145 Rev 22
7/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C,VI = 14 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 5. Electrical characteristics of L78L08C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
7.36
7.2
8
8.64
8.8
8.8
200
150
80
V
IO = 1 to 40 mA, VI = 8.5 to 20 V
IO = 1 to 70 mA, VI = 12 V
VI = 8.5 to 20 V, TJ = 25 °C
VI = 9 to 20 V, TJ = 25 °C
VO
DVO
DVO
Id
Output voltage
V
7.2
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
40
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.2
1.5
I
O = 1 to 40 mA
DId
mA
VI = 8 to 20 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
60
45
µV
dB
V
VI = 9 to 20 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
36
1.7
8/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C, VI = 15 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 6. Electrical characteristics of L78L09C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
8.28
8.1
9
9.72
9.9
9.9
250
200
80
V
IO = 1 to 40 mA, VI = 11.5 to 23 V
IO = 1 to 70 mA, VI = 15 V
VI = 11.5 to 23 V, TJ = 25 °C
VI = 12 to 23 V, TJ = 25 °C
Output voltage
V
8.1
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
40
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.2
1.5
I
O = 1 to 40 mA
DId
mA
VI = 12 to 23 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
70
44
µV
dB
V
VI = 12 to 23 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
36
1.7
DocID2145 Rev 22
9/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C, VI = 16 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 7. Electrical characteristics of L78L10C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
9.2
9
10
10.8
11
V
IO = 1 to 40 mA, VI = 12.5 to 23 V
IO = 1 to 70 mA, VI = 16 V
VI = 12.5 to 23 V, TJ = 25 °C
VI = 13 to 23 V, TJ = 25 °C
VO
DVO
DVO
Id
Output voltage
V
9
11
230
170
80
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
40
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.1
1.5
I
O = 1 to 40 mA
DId
mA
VI = 13 to 23 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
60
45
µV
dB
V
VI = 14 to 23 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
37
1.7
10/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C, VI = 19 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 8. Electrical characteristics of L78L12C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
11.1
10.8
10.8
12
12.9
13.2
13.2
250
200
100
50
V
IO = 1 to 40 mA, VI = 14.5 to 27 V
IO = 1 to 70 mA, VI = 19 V
VI = 14.5 to 27 V, TJ = 25 °C
VI = 16 to 27 V, TJ = 25 °C
Output voltage
V
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
6.5
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
I
O = 1 to 40 mA
0.2
1.5
DId
mA
VI = 16 to 27 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
80
42
µV
dB
V
VI = 15 to 25 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
36
1.7
DocID2145 Rev 22
11/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C, VI = 23 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified
Table 9. Electrical characteristics of L78L15C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
13.8
13.5
13.5
15
16.2
16.5
16.5
300
250
150
75
V
IO = 1 to 40 mA, VI = 17.5 to 30 V
IO = 1 to 70 mA, VI = 23 V
VI = 17.5 to 30 V, TJ = 25 °C
VI = 20 to 30 V, TJ = 25 °C
VO
DVO
DVO
Id
Output voltage
V
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
6.5
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
I
O = 1 to 40 mA
0.2
1.5
DId
mA
VI = 20 to 30 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
90
39
µV
dB
V
VI = 18.5 to 28.5 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
33
1.7
12/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C, VI = 27 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 10. Electrical characteristics of L78L18C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
16.6
16.2
16.2
18
19.4
19.8
19.8
320
270
170
85
V
IO = 1 to 40 mA, VI = 22 to 33 V
IO = 1 to 70 mA, VI = 27 V
VI = 22 to 33 V, TJ = 25 °C
VI = 22 to 33 V, TJ = 25 °C
Output voltage
V
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
6.5
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
I
O = 1 to 40 mA
0.2
1.5
DId
mA
VI = 23 to 33 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
120
38
µV
dB
V
VI = 23 to 33 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
32
1.7
DocID2145 Rev 22
13/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C, VI = 33 V, IO = 40 mA, CI = 0.33 µF, CO = 0.1 µF
unless otherwise specified.
Table 11. Electrical characteristics of L78L24C
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
22.1
21.6
21.6
24
25.9
26.4
26.4
350
300
200
100
6.5
V
IO = 1 to 40 mA, VI = 27 to 38 V
IO = 1 to 70 mA, VI = 33 V
VI = 27 to 38 V, TJ = 25 °C
VI = 28 to 38 V, TJ = 25 °C
VO
DVO
DVO
Id
Output voltage
V
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
6
I
O = 1 to 40 mA
0.2
DId
mA
VI = 28 to 38 V
1.5
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
200
37
µV
dB
V
VI = 29 to 35 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
30
1.7
14/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB),VI = 8.3 V,
IO = 40mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 12. Electrical characteristics of L78L33AB and L78L33AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
3.168
3.135
3.135
3.3
3.432
3.465
3.465
150
100
60
V
IO = 1 to 40 mA, VI = 5.3 to 20 V
IO = 1 to 70 mA, VI = 8.3 V
VI = 5.3 to 20 V, TJ = 25 °C
VI = 6.3 to 20 V, TJ = 25 °C
Output voltage
V
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
30
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
I
O = 1 to 40 mA
0.1
DId
mA
VI = 6.3 to 20 V
1.5
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
VI = 6.3 to 16.3 V, f = 120 Hz
40
49
µV
dB
V
41
IO = 40 mA, TJ = 25 °C
1.7
DocID2145 Rev 22
15/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB), VI = 10 V,
IO = 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 13. Electrical characteristics of L78L05AB and L78L05AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
4.8
5
5.2
5.25
5.25
150
100
60
V
IO = 1 to 40 mA, VI = 7 to 20 V
IO = 1 to 70 mA, VI = 10 V
VI = 7 to 20 V, TJ = 25 °C
VI = 8 to 20 V, TJ = 25 °C
4.75
4.75
VO
DVO
DVO
Id
Output voltage
V
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
30
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.1
1.5
I
O = 1 to 40 mA
DId
mA
VI = 8 to 20 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
40
49
µV
dB
V
VI = 8 to 18 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
41
1.7
16/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB), VI = 12 V,
IO = 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 14. Electrical characteristics of L78L06AB and L78L06AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
5.76
5.7
6
6.24
6.3
6.3
150
100
60
V
IO = 1 to 40 mA, VI = 8.5 to 20 V
IO = 1 to 70 mA, VI = 12 V
VI = 8.5 to 20 V, TJ = 25 °C
VI = 9 to 20 V, TJ = 25 °C
Output voltage
V
5.7
ΔVO
ΔVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
30
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.1
1.5
I
O = 1 to 40 mA
ΔId
mA
VI = 9 to 20 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
50
46
µV
dB
V
VI = 9 to 20 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
39
1.7
DocID2145 Rev 22
17/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB), VI = 14 V,
IO = 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 15. Electrical characteristics of L78L08AB and L78L08AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
7.68
7.6
8
8.32
8.4
8.4
175
125
80
V
IO = 1 to 40 mA, VI = 10.5 to 23 V
IO = 1 to 70 mA, VI = 14 V
VI = 10.5 to 23 V, TJ = 25 °C
VI = 11 to 23 V, TJ = 25 °C
VO
DVO
DVO
Id
Output voltage
V
7.6
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
40
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.1
1.5
I
O = 1 to 40 mA
DId
mA
VI = 11 to 23 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
60
45
µV
dB
V
VI = 12 to 23 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
37
1.7
18/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB), VI =15 V,
IO= 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 16. Electrical characteristics of L78L09AB and L78L09AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
8.64
8.55
8.55
9
9.36
9.45
9.45
225
150
80
V
IO = 1 to 40 mA, VI = 11.5 to 23 V
IO = 1 to 70 mA, VI = 15 V
VI = 11.5 to 23 V, TJ = 25 °C
VI = 12 to 23 V, TJ = 25 °C
Output voltage
V
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
40
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.1
1.5
I
O = 1 to 40 mA
DId
mA
VI = 12 to 23 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
70
44
µV
dB
V
VI = 12 to 23 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
37
1.7
DocID2145 Rev 22
19/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB), VI= 16 V,
IO = 40mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 17. Electrical characteristics of L78L10AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
9.6
9.5
9.5
10
10.4
10.5
10.5
230
170
80
V
IO = 1 to 40 mA, VI = 12.5 to 23 V
IO = 1 to 70 mA, VI = 16 V
VI = 12.5 to 23 V, TJ = 25 °C
VI = 13 to 23 V, TJ = 25 °C
VO
DVO
DVO
Id
Output voltage
V
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
40
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
5.5
0.1
1.5
I
O = 1 to 40 mA
DId
mA
VI = 13 to 23 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
60
45
µV
dB
V
VI = 14 to 23 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
37
1.7
20/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB), VI =19 V,
IO = 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 18. Electrical characteristics of L78L12AB and L78L12AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
11.5
11.4
11.4
12
12.5
12.6
12.6
250
200
100
50
V
IO = 1 to 40 mA, VI = 14.5 to 27 V
IO = 1 to 70 mA, VI = 19 V
VI = 14.5 to 27 V, TJ = 25 °C
VI = 16 to 27 V, TJ = 25 °C
Output voltage
V
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
6.5
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
I
O = 1 to 40 mA
0.1
1.5
DId
mA
VI = 16 to 27 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
80
42
µV
dB
V
VI = 15 to 25 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
37
1.7
DocID2145 Rev 22
21/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB),VI = 23 V,
IO= 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 19. Electrical characteristics of L78L15AB and L78L15AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
14.4
14.25
14.25
15
15.6
15.75
15.75
300
250
150
75
V
IO = 1 to 40 mA, VI = 17.5 to 30 V
IO = 1 to 70 mA, VI = 23 V
VI = 17.5 to 30 V, TJ = 25 °C
VI = 20 to 30 V, TJ = 25 °C
VO
DVO
DVO
Id
Output voltage
V
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
6.5
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
6
I
O = 1 to 40 mA
0.1
DId
mA
VI = 20 to 30 V
1.5
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
90
39
µV
dB
V
VI = 18.5 to 28.5 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
34
1.7
22/47
DocID2145 Rev 22
L78L
Electrical characteristics
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB),VI = 27 V,
IO = 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 20. Electrical characteristics of L78L18AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
VO
TJ = 25 °C
O = 1 to 40 mA, VI = 22 to 33 V
17.3
17.1
17.1
18
18.7
18.9
18.9
320
270
170
85
V
I
Output voltage
V
IO = 1 to 70 mA, VI = 27 V
VI = 22 to 33 V, TJ = 25 °C
VI = 22 to 33 V, TJ = 25 °C
DVO
DVO
Id
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
6.5
6
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
I
O = 1 to 40 mA
0.1
1.5
DId
mA
VI = 23 to 33 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
120
38
µV
dB
V
VI = 23 to 33 V, f = 120 Hz
33
IO = 40 mA, TJ = 25 °C
1.7
DocID2145 Rev 22
23/47
47
Electrical characteristics
L78L
Refer to the test circuits, TJ = 0 to 125 °C (AC) TJ = -40 to 125 °C (AB),VI = 33 V,
IO = 40 mA, CI = 0.33 μF, CO = 0.1 μF unless otherwise specified.
Table 21. Electrical characteristics of L78L24AB and L78L24AC
Symbol
Parameter
Output voltage
Test conditions
Min.
Typ.
Max.
Unit
VO
TJ = 25 °C
23
24
25
25.2
25.2
350
300
200
100
6.5
6
V
IO = 1 to 40 mA, VI = 27 to 38 V
IO = 1 to 70 mA, VI = 33 V
VI = 27 to 38 V, TJ = 25 °C
VI = 28 to 38 V, TJ = 25 °C
22.8
22.8
VO
DVO
DVO
Id
Output voltage
V
Line regulation
mV
mV
I
O = 1 to 100 mA, TJ = 25 °C
Load regulation
IO = 1 to 40 mA, TJ = 25 °C
TJ = 25 °C
mA
mA
Quiescent current
Quiescent current change
TJ = 125 °C
I
O = 1 to 40 mA
0.1
1.5
DId
mA
VI = 28 to 38 V
eN
SVR
Vd
Output noise voltage
Supply voltage rejection
Dropout voltage
B = 10 Hz to 100 kHz, TJ = 25 °C
200
37
µV5y
dB
VI = 29 to 33 V, f = 120 Hz
IO = 40 mA, TJ = 25 °C
31
1.7
V
24/47
DocID2145 Rev 22
L78L
Typical performance
5
Typical performance
Figure 4. L78L05/12 output voltage vs. ambient
temperature
Figure 5. L78L05/12/24 load characteristics
Figure 6. L78L05/12/24 thermal shutdown
Figure 7. L78L05/12 quiescent current vs.
output current
DocID2145 Rev 22
25/47
47
Typical performance
L78L
Figure 8. L78L05 quiescent current vs. input
voltage
Figure 9. L78L05/12/24 output characteristics
Figure 10. L78L05/12/24 ripple rejection
Figure 11. L78L05 dropout characteristics
Figure 12. L78L short-circuit output current
26/47
DocID2145 Rev 22
L78L
Typical application
6
Typical application
Figure 13. High output current short-circuit protected
Figure 14. Outuput boost circuit
DocID2145 Rev 22
27/47
47
Typical application
L78L
Figure 15. Current regulator
Figure 16. Adjustable output regulator
28/47
DocID2145 Rev 22
L78L
Package mechanical data
7
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
7.1
TO-92
Figure 17. TO-92 drawing
0102782 D
DocID2145 Rev 22
29/47
47
Package mechanical data
L78L
Table 22. TO-92 mechanical data
mm
Dim.
Min.
Typ.
Max.
A
b
4.32
0.36
4.45
3.30
2.41
1.14
12.70
2.16
0.92
0.41
4.95
0.51
4.95
3.94
2.67
1.40
15.49
2.41
1.52
0.56
D
E
e
e1
L
R
S1
W
V
5°
30/47
DocID2145 Rev 22
L78L
Package mechanical data
7.2
SO-8
Figure 18. SO-8 drawing
0016023_G_FU
DocID2145 Rev 22
31/47
47
Package mechanical data
L78L
Table 23. SO-8 mechanical data
mm
Dim.
Min.
Typ.
Max.
A
A1
A2
b
1.75
0.25
0.10
1.25
0.31
0.28
0.10
0.10
4.80
5.80
3.80
0.51
0.48
0.25
0.23
5.00
6.20
4.00
b1
c
c1
D
4.90
6.00
3.90
1.27
E
E1
e
h
0.25
0.40
0.50
1.27
L
L1
L2
k
1.04
0.25
0°
8°
ccc
0.10
32/47
DocID2145 Rev 22
L78L
Package mechanical data
Figure 19. SO-8 footprint
Footprint_0016023_G_FU
DocID2145 Rev 22
33/47
47
Package mechanical data
L78L
7.3
SOT-89
Figure 20. SOT-89 drawings
ꢀꢁꢂꢃꢄꢅꢅB5(9B(
34/47
DocID2145 Rev 22
L78L
Package mechanical data
Table 24. SOT-89 mechanical data
mm
Dim.
Min.
Typ.
Max.
A
B
1.40
0.44
0.36
0.35
0.35
4.40
1.62
1.60
0.56
0.48
0.44
0.44
4.60
1.83
B1
C
C1
D
D1
D3
E
0.90
2.29
1.42
2.92
3.94
2.70
1°
2.60
1.57
3.07
4.25
3.10
8°
e
e1
H
H1
K
L
0.89
1.20
R
0.25
90°
b
DocID2145 Rev 22
35/47
47
Package mechanical data
L78L
Figure 21. SOT-89 footprint
)RRWSULQW
36/47
DocID2145 Rev 22
L78L
Packaging mechanical data
8
Packaging mechanical data
8.1
Tape and reel for TO-92
Figure 22. TO-92 tape and reel dimensions
GHOWDꢇ3
7
$ꢄ
7ꢆ
7ꢄ
+ꢄ
GHOWDꢇ+
:ꢆ
+
+ꢁ
G
/
Oꢄ
:
:ꢁ
:ꢄ
)ꢄ
)ꢆ
'ꢁ
W
3ꢆ
3ꢁ
'5$:,1*ꢇ12 ꢇ,1ꢇ6&$/(
DocID2145 Rev 22
37/47
47
Packaging mechanical data
L78L
Table 25. TO-92 tape and reel mechanical data
mm
Dim.
Min.
Typ.
Max.
A1
T
4.80
3.80
1.60
2.30
0.48
12.90
7.05
2.94
5.48
2.00
19.00
6.5
T1
T2
d
0.45
12.50
5.65
2.40
4.98
-2.00
17.50
5.5
0.47
12.70
6.35
2.50
5.08
P0
P2
F1, F2
F3
delta H
W
18.00
6.00
9.00
W0
W1
W2
H
8.50
9.25
0.50
21
18.50
1
H3
H0
H1
D0
t
0.5
2
15.50
16.00
25.0
4.00
18.8
27.0
4.20
0.90
11.00
3.80
L
l1
3.00
-1.00
352
28
delta P
Ø1
Ø2
u
1.00
358
32
355
30
44
47
50
38/47
DocID2145 Rev 22
L78L
Packaging mechanical data
Figure 23. TO-92 Ammopack mechanical data drawing
T
A1
T2
T1
H1
delta H
W2
H
H3
H0
d
L
l1
W
W0
W1
F1 F2
F3
D0
t
P2
P0
0050910S_Rev_U
DocID2145 Rev 22
39/47
47
Packaging mechanical data
L78L
Table 26. TO-92 Ammopack mechanical data
mm
Dim.
Min.
Typ.
Max.
A1
T
4.80
3.80
1.60
2.30
0.48
12.90
7.05
2.94
5.48
2.00
19.00
6.5
T1
T2
d
0.45
12.50
5.65
2.40
4.98
-2.00
17.50
5.5
0.47
12.70
6.35
2.50
5.08
P0
P2
F1, F2
F3
delta H
W
18.00
6.00
9.00
W0
W1
W2
H
8.50
9.25
0.50
21
18.50
1
H3
H0
H1
D0
t
0.5
2
15.50
16.00
25.0
4.00
18.8
27.0
4.20
0.90
11.00
3.80
L
l1
3.00
delta P
-1.00
1.00
40/47
DocID2145 Rev 22
L78L
Packaging mechanical data
8.2
Tape and reel for SO-8
Figure 24. SO-8 tape and reel dimensions
Figure 25. SO-8 tape and reel mechanical data
mm
Dim.
Min.
Typ.
Max.
A
C
330
12.8
20.2
60
13.2
D
N
T
22.4
8.5
5.9
2.3
4.1
8.1
-
Ao
Bo
Ko
Po
P
8.1
5.5
2.1
3.9
7.9
DocID2145 Rev 22
41/47
47
Packaging mechanical data
L78L
8.3
Tape and reel for SOT-89
Figure 26. SOT-89 carrier tape drawing
ꢀꢄꢄꢄꢀꢅꢆB(
Table 27. SOT-89 carrier tape dimensions
mm.
Dim.
Values
Tolerance
Ao
Bo
Ko
F
4.52
4.91
1.90
5.50
1.75
12
± 0.10
± 0.10
± 0.10
± 0.10
± 0.10
± 0.30
± 0.10
± 0.10
± 0.10
± 0.10
± 0.05
± 0.10
E
W
P2
Po
P1
T
2
4
8
0.30
Æ 1.55
Æ 1.60
D
D1
42/47
DocID2145 Rev 22
L78L
Order codes
9
Order codes
Table 28. Order codes
Part numbers
Output
voltages
TO-92
TO-92
(ammopack)
SO-8
L78L33ABD-TR
TO-92 (Bag) (1)
SOT-89
(V)
(tape and reel)
L78L33ABZ-AP
L78L33ACZ-AP
L78L33ABUTR
L78L33ACUTR
3.3
3.3
3.3
5
L78L33ACD13TR
L78L33CD-TR
L78L33AZ
L78L33ACZTR
L78L05ABD13TR
L78L05ACD13TR
L78L05CD13TR
L78L05ABZ
L78L05ACZ
L78L05CZ
L78L05ABZ-AP
L78L05ACZ-AP
L78L05ABZ-TR
L78L05ACZTR
L78L05ABUTR
L78L05ACUTR
5
5
L78L06ABZ
L78L06ABUTR
L78L06ACUTR
L78L08ABUTR
L78L08ACUTR
6
L78L06ACD13TR
L78L08ABD13TR
L78L08ACD13TR
L78L08CD13TR
L78L09ABD13TR
L78L09ACD13TR
L78L09CD13TR
6
L78L08ABZ-AP
L78L08ACZ-AP
L78L08ABZTR
L78L08ACZTR
8
L78L08ACZ
L78L09ABZ
8
8
L78L09ABUTR
9
L78L09ACZ-AP
L78L09ACZ-TR L78L09ACUTR
9
9
L78L10ACUTR
L78L12ABUTR
10
12
12
12
15
15
15
18
18
24
24
24
L78L12ABD-TR
L78L12ACD13TR
L78L12CD13TR
L78L12ABZ
L78L12ACZ
L78L12ABZ-AP
L78L12ACZ-AP
L78L12ACZ-TR L78L12ACUTR
L78L15ABZ-AP
L78L15ABUTR
L78L15ACUTR
L78L15ACD13TR
L78L15CD-TR
L78L15ACZ
L78L18ACUTR
L78L18CD13TR
L78L24ABZ-TR
L78L24ACZ-AP L78L24ACUTR
L78L24CD-TR
1. Available in Ammopak with the suffix "-AP" or in tape and reel with the suffix "TR". Please note that in these cases pins are
shaped according to tape and reel specifications.
DocID2145 Rev 22
43/47
47
Order codes
L78L
Table 29. Marking information
Part numbers
Marking
Packages
Output voltages
L78L05ABD13TR
L78L05ABD13TR
L78L05ABZ
78L05B
8C
SO-8
SOT-89
TO-92
TO-92
TO-92
SO-8
5 V
5 V
5 V
5 V
5 V
5 V
5 V
5 V
5 V
5 V
5 V
5 V
6 V
6 V
6 V
6 V
8 V
8 V
8 V
8 V
8 V
8 V
8 V
8 V
8 V
8 V
8 V
9 V
9 V
9 V
9 V
9 V
9 V
10 V
12 V
L78L05
L78L05
L78L05
L78L05A
8C
L78L05ABZ-AP
L78L05ABZ-TR
L78L05ACD13TR
L78L05ACD13TR
L78L05ACZ
SOT-89
TO-92
TO-92
TO-92
SO-8
L78L05
L78L05
L78L05
78L05
L78L05
8E
L78L05ACZ-AP
L78L05ACZTR
L78L05CD13TR
L78L05CD13TR
L78L06ABUTR
L78L06ABZ
TO-92
SOT-89
TO-92
SO-8
L78L06
L78L06A
8E
L78L06ACD13TR
L78L06ACD13TR
L78L08ABD13TR
L78L08ABD13TR
L78L08ABZ-AP
L78L08ABZTR
L78L08ACD13TR
L78L08ACD13TR
L78L08ACZ
SOT-89
SO-8
78L08B
8G
SOT-89
TO-92
TO-92
SO-8
L78L08
L78L08
78L08A
8G
SOT-89
TO-92
TO-92
TO-92
SO-8
L78L08
L78L08
L78L08A
78L08
78L09B
L78L09
78L09A
8H
L78L08ACZ-AP
L78L08ACZTR
L78L08CD13TR
L78L09ABD13TR
L78L09ABZ
SO-8
TO-92
SO8
L78L09ACD13TR
L78L09ACD13TR
L78L09ACZ-AP
L78L09ACZ-TR
L78L09CD13TR
L78L09CD13TR
L78L12ABD-TR
SOT-89
TO-92
TO-92
SO-8
L78L09
L78L09
78L09
8I
SOT-89
SO-8
78L12B
44/47
DocID2145 Rev 22
L78L
Order codes
Table 29. Marking information (continued)
Part numbers
Marking
Packages
Output voltages
L78L12ABD-TR
L78L12ABZ
8K
SOT-89
TO-92
TO 92
SO-8
12 V
12 V
12 V
5 V
L78L12
L78L12
78L12A
8K
L78L12ABZ-AP
L78L12ACD13TR
L78L12ACD13TR
L78L12ACZ
TO-92
TO-92
TO-92
TO-92
SO-8
5 V
L78L12
L78L12
L78L12
78L12
8L
12 V
12 V
12 V
12 V
15 V
15 V
15 V
15 V
15 V
15 V
18 V
24 V
24 V
24 V
3.3 V
3.3 V
3.3 V
3.3 V
3.3 V
3.3 V
3.3 V
L78L12ACZ-AP
L78L12ACZ-TR
L78L12CD13TR
L78L15ABUTR
L78L15ABZ-AP
L78L15ACD13TR
L78L15ACD13TR
L78L15ACZ
SOT-89
TO-92
SO-8
L78L15
78L15A
8L
SOT-89
TO-92
SO-8
L78L15
78L15
8B
L78L15CD-TR
L78L18ACUTR
L78L24ABZ-TR
L78L24ACUTR
L78L24ACZ-AP
L78L33ABD-TR
L78L33ABD-TR
L78L33ABZ-AP
L78L33ACD13TR
L78L33ACUTR
L78L33ACZ
SOT-89
TO-92
SOT-89
TO-92
SO-8
L78L24
8P
L78L24
78L33B
8A
SOT-89
TO-92
SO-8
L78L33
78L33A
8A
SOT-89
TO-92
TO-92
L78L33
L78L33
L78L33ACZ-AP
DocID2145 Rev 22
45/47
47
Revision history
L78L
10
Revision history
Table 30. Document revision history
Changes
Date
Revision
14-Mar-2005
15-Mar-2005
23-Dec-2005
12-Sep-2006
07-Jun-2007
18-Sep-2007
15-Jul-2008
18-Aug-2008
03-Apr-2009
08-Feb-2011
21-Feb-2012
9
Add tape and reel for TO-92.
10
11
12
13
14
15
16
17
18
19
Add note on Table 3.
Mistake on ordering Table in header.
Order codes updated.
Order codes updated.
Added Table 1 in cover page.
Modified: Table 1 and Table 28: Order codes.
Modified Figure 12 on page 26.
Added: RthJA value for SOT-89 Table 2 on page 5.
Added note Table 24 on page 35
Modified: SOT-89 Figure 2 on page 4.
Updated TOP value for L78L00AC in Table 1 on page 5.
14-Aug-2012
07-Sep-2012
20
21
Minor text changes.
Added: Table 29: Marking information.
Part numbers L78LxxAB, L78LxxAC, L78LxxC changed to L78L.
Removed Table1: Device summary.
Updated features and description in cover page, Table 28: Order
codes, Table 29: Marking information and Section 7: Package
mechanical data.
14-Apr-2014
22
Added Section 8: Packaging mechanical data.
Minor text changes.
46/47
DocID2145 Rev 22
L78L
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID2145 Rev 22
47/47
47
相关型号：
©2020 ICPDF网 联系我们和版权申明