GS-R4840NV [STMICROELECTRONICS]

36 W NEGATIVE SWITCHING REGULATOR; 36瓦反向开关稳压器
GS-R4840NV
型号: GS-R4840NV
厂家: ST    ST
描述:

36 W NEGATIVE SWITCHING REGULATOR
36瓦反向开关稳压器

稳压器 开关
文件: 总3页 (文件大小:40K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
GS-R4840NV  
36 W NEGATIVE SWITCHING REGULATOR  
Type  
V
V
I
out  
in  
out  
GS-R4840NV  
-40 to -60 V -22 to -60 V -600 mA  
FEATURES  
Digital input for voltage selection  
Short-circuit protection  
Overvoltage protection  
Thermal protection  
Softstart  
Fault signal indication output  
High efficiency (>80%)  
DESCRIPTION  
The GS-R4840NV is a negative input, negative  
output switching voltage regulator that provides up  
to 36W output power without input-output isolation.  
The output voltage is programmable by input logic  
signals that allow 64 steps (6 bit) of regulated  
output, from -22 to -60V.  
ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise specified)  
Symbol  
Parameter  
Input Voltage  
Test Conditions  
= -22 to -60V  
Min  
Typ  
Max  
Unit  
V
o
V
o
-40  
-48  
-60  
V
i
I
= -10 to -600mA  
Input Ripple Voltage  
Output Voltage  
V = -40 to -60V  
I
I
= -600mA  
V
i
o
o
20  
-60  
10  
mVpp  
V
ir  
V = -40 to -60V  
i
= -10 to -600mA  
V
-22  
o
Output Ripple  
Voltage  
V
o
= -22 to -60V  
= -600mA  
V
o
4
mVpp  
or  
I
Output Overvoltage  
Protection  
V = -40 to -60V  
i
V
Vo+5%  
-10  
Vo+10%  
-600  
V
oov  
I
o
= -10 to -600mA  
Output Current  
V = -40 to -60V  
i
I
mA  
mA  
mA  
o
V
o
= -22 to -60V  
Current Limit  
V = -40 to -60V  
I
ol  
-900  
i
Overload Condition  
Output Average  
Short Circ. Current  
V = -40 to -60V  
i
I
-80  
osc  
Switching Frequency  
Efficiency  
f
100  
82  
kHz  
%
s
V = -48V  
o
I
= -600mA  
o
η
80  
i
V
= -48V  
Thermal Resistance  
Case to Ambient  
R
4
°C/W  
°C  
th  
Operating Case  
Temperature Range  
T
0
+85  
cop  
Storage  
Temperature Range  
T
-20  
+105  
°C  
stg  
December 1993  
1/3  
GS-R4840NV  
CONNECTION DIAGRAM AND MECHANICAL DATA  
Package F. Dimensions in mm. (inches)  
PIN DESCRIPTION  
Pin  
Function  
-Vin  
Description  
Negative input voltage.  
1
Remote Inhibit/Enable logically compatible with CMOS or open collector TTL. The  
converter is OFF (Inhibit) when this pin is unconnected or the voltage applied is in the  
range of 2 to 5V (referred to GND). The converter is ON (Enable) for a control voltage in  
the range of 0 to 0.8V maximum.  
Inhibit/  
Enable  
2
Return for input voltage source and +5V logic supply voltage. Internally connected to pin  
15.  
GND IN  
3
+5V IN  
DB0  
DB1  
DB2  
DB3  
DB4  
DB5  
CS  
+5V logic supply voltage. Maximum voltage must not exceed 7V.  
4
5
Data bit 0 (LSB).  
Data bit 1.  
6
Data bit 2.  
7
Data bit 3.  
8
Data bit 4.  
9
Data bit 5 (MSB).  
10  
11  
Chip select. An active low input control which is the device enable input terminal.  
Write control. An active low control which enables the microprocessor to write data to the  
DAC.  
WR  
12  
-Vout  
Negative output voltage.  
13  
14  
FAULT  
FAULT indication output (referred to GND). The FAULT signal is high (TTL compatible  
level) when:  
- the INHIBIT is ON (high)  
- an output overload is present (Vo < 18V typ.)  
- an overtemperature is present  
- an overvoltage is present (Vo > Vo+5%)  
GND OUT  
Return for output voltage source. Internally connected to pin 3.  
15  
Note: Case internally connected to Ground.  
2/3  
GS-R4840NV  
USER NOTES  
Digital Information  
t
and t  
have to be 100ns and 50ns minimum  
DH  
DS  
The GS-R4840NV accepts 6 bit binary at the data  
inputs DB0 to DB5. Data are transferred when CS  
is low and during the rising edge of WR signal.  
respectively (see fig. 1).  
Figure 1 - Signals Timing.  
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the  
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No  
license is granted by implication or otherwise under any patentor patent rights of SGS-THOMSON Microelectronics. Specification mentioned  
in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied.  
SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express  
written approval of SGS-THOMSON Microelectronics.  
1994 SGS-THOMSON Microelectronics – All Rights Reserved  
SGS-THOMSON Microelectronics GROUP OF COMPANIES  
Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands -  
Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.  
3/3  

相关型号:

GS-R51212

20W TRIPLE OUTPUT STEP-DOWN SWITCHING REGULATOR
STMICROELECTR

GS-R51212S

31WTRIPLE OUTPUT STEP-DOWN SWITCHING REGULATORS
STMICROELECTR

GS-R51515S

31WTRIPLE OUTPUT STEP-DOWN SWITCHING REGULATORS
STMICROELECTR

GS-R51X1XS

31 W TRIPLE OUTPUT STEP-DOWN SWITCHING REGULATORS
ETC

GS-RXXX12

DC/DC STEP SOWN POWER SUPPLY
STMICROELECTR

GS-T150-05/1

1-OUTPUT 150W DC-DC REG PWR SUPPLY MODULE, 125 X 66.5 X 19 MM, HEAT SINK, LOW PROFILE PACKAGE-12
STMICROELECTR

GS-T150-05/2

1-OUTPUT 150W DC-DC REG PWR SUPPLY MODULE, 125 X 66.5 X 34 MM, HEAT SINK, LOW PROFILE PACKAGE-12
STMICROELECTR

GS-T25-0500

1-OUTPUT 25W DC-DC REG PWR SUPPLY MODULE
STMICROELECTR

GS-T27-0600

1-OUTPUT 27W DC-DC REG PWR SUPPLY MODULE
STMICROELECTR

GS-T30-1200

1-OUTPUT 30W DC-DC REG PWR SUPPLY MODULE
STMICROELECTR

GS-T30-1500

1-OUTPUT 30W DC-DC REG PWR SUPPLY MODULE
STMICROELECTR

GS001

Getting Started with BLDC Motors and dsPIC30F Devices
MICROCHIP