EVAL6920D [STMICROELECTRONICS]

EVAL6920D 1A high efficiency synchronous Rectifier step up converter; EVAL6920D 1A高效率同步整流升压转换器
EVAL6920D
型号: EVAL6920D
厂家: ST    ST
描述:

EVAL6920D 1A high efficiency synchronous Rectifier step up converter
EVAL6920D 1A高效率同步整流升压转换器

转换器 升压转换器
文件: 总4页 (文件大小:94K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
EVAL6920D  
EVAL6920D 1A high efficiency synchronous  
Rectifier step up converter  
Data Brief  
General description  
The EVAL6920D Evaluation Board integrates the  
high efficiency step up converter L6920D as well  
as the external components required for a typical  
application.  
The start up is guaranteed at 1V and the device is  
operating down to 0.6V. The output voltage can  
be adjusted from 2V to 5.2V and two fixed output  
voltages (3.3V and 5V) are also available.  
Evaluation board schematic  
November 2006  
Rev1  
1/4  
For further information contact your local STMicroelectronics sales office.  
www.st.com  
4
Features  
EVAL6920D  
1
Features  
Table 1.  
Jumper  
Evaluation board part list  
Position  
Function  
1-2  
2-3  
Device enabled  
Device disabled  
J1  
J2  
None  
1-2  
Adjustable using R4 and R5 (not mounted)  
3.3V output voltage  
2-3  
5V output voltage  
R4, R5 should be selected in the range of 100k- 10Mto minimize consumption and error  
due to current sunk pin (few nA).  
Figure 1.  
Package - TSSOP8  
Figure 2.  
Demoboard components (top side)  
2/4  
EVAL6920D  
Revision history  
Figure 3.  
Demoboard layout (top side)  
Figure 4.  
Demoboard layout (bottom side)  
2
Revision history  
Table 2.  
Date  
22-Nov-2006  
Revision history  
Revision  
Changes  
1
First issue  
3/4  
EVAL6920D  
Please Read Carefully:  
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the  
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any  
time, without notice.  
All ST products are sold pursuant to ST’s terms and conditions of sale.  
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no  
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this  
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products  
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such  
third party products or services or any intellectual property contained therein.  
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED  
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED  
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS  
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.  
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT  
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING  
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,  
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE  
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.  
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void  
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any  
liability of ST.  
ST and the ST logo are trademarks or registered trademarks of ST in various countries.  
Information in this document supersedes and replaces all information previously supplied.  
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.  
© 2006 STMicroelectronics - All rights reserved  
STMicroelectronics group of companies  
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -  
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America  
www.st.com  
4/4  

相关型号:

EVAL6924D

EVAL6924D Battery charger system with integrated Power Switch for Li-ION/Li-POLYMER
STMICROELECTR

EVALAD5933EB

Evaluation Board for the 1 MSPS 12-Bit Impedance Converter Network Analyzer
ADI

EVALCOMMBOARD

Main interface to the controlling PC a standard 12Mbps based on a ST72F651AR6 USB microcontroller
STMICROELECTR

EVALCONTROLBRD2

1.75 MSPS, 4 mW 10-Bit-12-Bit Parallel ADCs
ADI

EVALCONTROLBRD23

1.75 MSPS, 4 mW 10-Bit/12-Bit Parallel ADCs
ADI

EVALDVBS2

Multistandard advance demodulator STB0899 Digital TV satellite set-top boxes
STMICROELECTR

EVALHVLED805

4.2 W off-line LED driver with primary side regulation
STMICROELECTR

EVALKITST7580-1

ST7580 power line networking system-on-chip demonstration kit
STMICROELECTR

EVALNV1D

6-BIT Sin/D FLASH CONVERTER
ICHAUS

EVALPM8803-FLY

EVALPM8803-FLY: IEEE802.3at compliant demonstration kit with synchronous flyback PoE converter
STMICROELECTR

EVALSP1340CPU

EVALSP1340 evaluation board (rev. 2.2) for SPEAr1340
STMICROELECTR

EVALSP320SCPU

EVALSP320SCPU evaluation board for SPEAr320S
STMICROELECTR