ESDCAN01-2BLY [STMICROELECTRONICS]
汽车用双线TVS,SOT23-3L封装,用于CAN总线(12 V系统);型号: | ESDCAN01-2BLY |
厂家: | ST |
描述: | 汽车用双线TVS,SOT23-3L封装,用于CAN总线(12 V系统) 局域网 光电二极管 电视 瞬态抑制器 |
文件: | 总9页 (文件大小:219K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ESDCAN24-2BLY
Automotive dual-line Transil™,
transient voltage suppressor (TVS) for CAN bus
Datasheet production data
Features
3
■ Dual line ESD and EOS protection
■ Bidirectional device
2
■ Max pulse power: 230 W (8/20 µs)
■ Stand-off voltage 24 V
1
SOT23-3L
■ Low clamping factor V /V
CL BR
■ Fast response time
■ Low leakage current
■ Small plastic package
Figure 1.
Functional diagram
1
Benefits
■ ESD and EOS protection for CAN transceiver
■ SOT23 package for space saving on high
3
density printed circuit board
■ Transil diodes providing high overvoltage
protection by clamping action and
instantaneous response to transient
overvoltages
2
Complies with the following standards
Description
■ ISO10605 - C = 150 pF, R = 330
– 30 kV (air discharge)
The ESDCAN24-2BLY is a dual-line Transil
specifically designed for the protection of the
automotive CAN bus lines against electrostatic
discharge (ESD).
– 30 kV (contact discharge)
■ ISO10605 - C = 330 pF, R = 330
– 30 kV (air discharge)
– 30 kV (contact discharge)
■ ISO7637-2:
– Pulse 3a: V = -150 V
s
– Pulse 3b: V = +100 V
s
Application
Automotive controller area network (CAN) bus
lines where electrostatic discharge and other
transients must be suppressed.
TM: Transil is a trademark of STMicroelectronics
November 2012
Doc ID 022184 Rev 3
1/9
This is information on a product in full production.
www.st.com
9
Characteristics
ESDCAN24-2BLY
1
Characteristics
Table 1.
Symbol
Absolute maximum ratings (T
= 25°C)
amb
Parameter
Value
Unit
ISO10605 - C = 150 pF, R = 330
Contact discharge
Air discharge
30
30
Electrostatic discharge
capability
VPP
kV
ISO10605 - C = 330 pF, R = 330
Contact discharge
Air discharge
30
30
HBM MIL STD 883
8
230
PPP
IPP
Tj
Peak pulse power dissipation 8/20 µs)(1)
Peak pulse current typical value (8/20 µs)
Maximum junction temperature
Tj initial = Tamb
W
A
5.5
150
°C
°C
°C
Top
Tstg
Operating junction temperature range
Storage temperature range
-40 to +125
-55 to +150
1. For a surge greater than the maximum values, the diode will fail in short-circuit.
Figure 2.
Electrical characteristics (definitions)
I
Symbol
Parameter
VBR
=
=
=
=
=
Breakdown voltage
Stand-off voltage
Clamping voltage
Leakage current @ VRM
Peak pulse current
VRM
VCL
IRM
IPP
V
CLVBR VRM
V
IRM
VRM VBR VCL
Slope: 1/Rd
IPP
Table 2.
Symbol
Electrical characteristics (values, T
= 25 °C)
amb
Test conditions
Min.
Typ.
Max.
Unit
VRM
VBR
IRM
VCL
VCL
VCL
T(1)
C
Stand-off voltage
24
32
V
IR = 1 mA
27
V
nA
VRM = 24 V
100
40
Pulse ISO7637-2 Pulse 3b
Pulse ISO7637-2 Pulse 3a
IPP = 5 A, 8/20µs
V
-40
V
43
9
V
Voltage temperature coefficient
VR = 0 V DC, F = 1 MHz
10-4/°C
30
pF
1. VBR = T x (Tamb -25) x VBR(25 °C)
2/9
Doc ID 022184 Rev 3
ESDCAN24-2BLY
Characteristics
Figure 3.
Response to ISO 7637-2 Pulse 3a
on each channel
Figure 4.
Response to ISO 7637-2 Pulse 3b
on each channel
C1
Vbus = 10 V/d
Vbus = 10 V/d
500 ns/d
C1
C2
Vtransciever = 10 V/d
Vtransciever = 10 V/d
C2
500 ns/d
Figure 5.
ESD response to ISO10605 -
C = 150 pF, R = 330 (+25 kV air
discharge) on each channel
Figure 6.
ESD response to ISO10605 -
C = 150 pF, R = 330 (-25 kV air
discharge) on each channel
C2
Vbus = 10 V/d
Vbus = 10 V/d
C2
C3
Vtransciever = 10 V/d
Vtransciever = 10 V/d
C3
100 ns/d
100 ns/d
Figure 7.
Peak pulse power dissipation
versus initial junction temperature
(maximum values)
Figure 8.
Peak pulse power dissipation
versus pulse duration (maximum
values)
PPP(W)
400
PPP(W)
1000
Tj = 25 °C
direct and reverse
exponential waveform
Exponential waveform : 8/20 µs
350
300
250
200
150
100
50
100
10
t (µs)
p
Tj(°C)
0
1
25
50
75
100
125
150
175
10
100
1000
Doc ID 022184 Rev 3
3/9
Application and design guidelines
ESDCAN24-2BLY
Figure 9.
Clamping voltage versus peak
Figure 10. Junction capacitance versus
pulse current (typical values,
exponential waveform 8/20 µs)
reverse voltage applied
(typical values)
C(pF)
IPP(A)
30
25
20
15
10
5
10.0
F = 1 MHz
VOSC = 30 mVRMS
Tj = 25 °C
direct and reverse
Direct and reverse
Tj = 25 °C
Tj = -40 °C
Tj = 150 °C
1.0
VCL(V)
VR(V)
24 27
0.1
25
0
30
35
40
45
0
3
6
9
12
15
18
21
Figure 11. Leakage current versus junction
temperature (typical values)
Figure 12. S21 attenuation measurement
results of each channel
S21 (dB)
Ir(nA)
10.00
0
VR = VRM = 24 V
-5
DIRECT/REVERSE
-10
-15
-20
-25
-30
-35
1.00
0.10
Tj(°C)
125
0.01
-40
F (MHz)
25
50
75
100
-45
0.1
1
10
100
1000
2
Application and design guidelines
More information is available in the ST Application note AN2689 “Protection of automotive
electronics from electrical hazards, guidelines for design and component selection”.
4/9
Doc ID 022184 Rev 3
ESDCAN24-2BLY
Ordering information scheme
3
Ordering information scheme
Figure 13. Ordering information scheme
ESD CAN 24 - 2 B L
Y
ESD: ESD protection
Application
Controller area network
Stand-off voltage VRM
24 = 24 V maximum
Number of protected lines
2 = 2 lines
Directionality
B = bi-directional
Package
L = SOT23-3L
Automotive grade
Doc ID 022184 Rev 3
5/9
Package information
ESDCAN24-2BLY
4
Package information
●
●
Epoxy meets UL94, V0
Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
®
ECOPACK is an ST trademark.
Table 3.
SOT23-3L dimensions
Dimensions
Millimeters
Ref.
Inches
Max.
A
Min.
Max.
8°
Min.
0°
E
a
A
0°
0.89
0
8°
1.4
0.1
0.035
0
0.055
0.004
0.02
e
A1
B
B
D
e1
0.3
0.51
0.18
3.04
1.05
2.1
0.012
0.003
0.108
0.033
0.067
0.047
0.083
c
0.085
2.75
0.85
1.7
0.007
0.12
S
D
e
A1
0.041
0.083
0.063
0.108
Gauge
Plane 0.25
e1
E
c
a
1.2
1.6
L1
L
H
L
2.1
2.75
H
0.6 typ.
0.024 typ.
L1
S
0.25
0.35
0.55
0.65
0.010
0.014
0.022
0.026
6/9
Doc ID 022184 Rev 3
ESDCAN24-2BLY
Figure 14. Footprint (dimensions in mm)
Package information
0.95
0.61
1.26
0.73
3.25
Doc ID 022184 Rev 3
7/9
Ordering information
ESDCAN24-2BLY
5
Ordering information
Table 4.
Ordering information
Order code
Marking
Package
Weight
Base qty
Delivery mode
ESDCAN24-2BLY
EL24
SOT-23
9.795 mg
3000
Tape and reel
6
Revision history
Table 5.
Date
Document revision history
Revision
Changes
29-May-2012
04-Sep-2012
07-Nov-2012
1
First issue.
Update values for VRM in Table 2. Updated Figure 10,
Figure 11, and Figure 13.
2
3
Added dimensions a and L1 in Table 3.
8/9
Doc ID 022184 Rev 3
ESDCAN24-2BLY
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 022184 Rev 3
9/9
相关型号:
ESDCAN24-2BLY
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus
STMICROELECTR
©2020 ICPDF网 联系我们和版权申明