B140NF75 [STMICROELECTRONICS]
N-CHANNEL 75V - 0.0065 ohm -120A DPAK/IPAK/TO-220 STripFET II POWER MOSFET; N沟道75V - 0.0065欧姆-120A DPAK / IPAK / TO- 220的STripFET II功率MOSFET
| 型号： | B140NF75 |
| 厂家： | 
ST |
| 描述： | N-CHANNEL 75V - 0.0065 ohm -120A DPAK/IPAK/TO-220 STripFET II POWER MOSFET |
| 文件： | 总18页 (文件大小：541K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
STP140NF75
STB140NF75 - STB140NF75-1
N-channel 75V - 0.0065Ω - 120A - D2PAK/I2/TO-220
STripFET™ III Power MOSFET
General features
Type
VDSS
RDS(on)
ID
STB140NF75
STB140NF75-1
STP140NF75
75V
75V
75V
<0.0075Ω
<0.0075Ω
<0.0075Ω
120A(1)
120A(1)
120A(1)
3
1
3
2
1
D2PAK
TO-220
1. Current limited by package
■ 100% avalanche tested
3
2
1
Description
I2PAK
This Power MOSFET is the latest development of
STMicroelectronis unique "Single Feature Size™"
strip-based process. The resulting transistor
shows extremely high packing density for low on-
resistance, rugged avalanche characteristics and
less critical alignment steps therefore a
Internal schematic diagram
remarkable manufacturing reproducibility.
Applications
■ Switching application
Order codes
Part number
Marking
Package
Packaging
STB140NF75T4
STB140NF75-1
STP140NF75
B140NF75
B140NF75
P140NF75
D2PAK
I2PAK
Tape & reel
Tube
TO-220
Tube
June 2006
Rev 4
1/18
www.st.com
18
Contents
STB140NF75 - STP140NF75-1 - STP140NF75
Contents
1
2
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3
4
5
6
7
Spice thermal model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STB140NF75 - STP140NF75-1 - STP140NF75
Electrical ratings
1
Electrical ratings
Table 1.
Symbol
Absolute maximum ratings
Parameter
Value
Unit
VDS
VDGR
VGS
Drain-source voltage (VGS = 0)
Drain-gate voltage (RGS = 20 kΩ)
Gate- source voltage
75
75
V
V
20
V
(1)
ID
Drain current (continuous) at TC = 25°C
Drain current (continuous) at TC = 100°C
Drain current (pulsed)
120
100
480
310
2.08
10
A
(1)
ID
A
(2)
IDM
A
Ptot
Total dissipation at TC = 25°C
Derating Factor
W
W/°C
V/ns
mJ
dv/dt (3)
Peak diode recovery voltage slope
Single pulse avalanche energy
Storage temperature
(4)
EAS
750
Tstg
Tj
-55 to 175
°C
Max. operating junction temperature
1. Value limited by wire bonding
2. Pulse width limited by safe operating area.
3. ISD ≤120A, di/dt ≤400A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX
4. Starting Tj = 25 °C, ID = 60A, VDD = 30V
Table 2.
Thermal data
Rthj-case Thermal resistance junction-case max
0.48
62.5
300
°C/W
°C/W
°C
Rthj-amb Thermal resistance junction-ambient max
TJ
Maximum lead temperature for soldering purpose(1)
1. for 10 sec. 1.6mm from case
3/18
Electrical characteristics
STB140NF75 - STP140NF75-1 - STP140NF75
2
Electrical characteristics
(T
=25°C unless otherwise specified)
CASE
Table 3.
Symbol
On/off states
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Drain-source
V(BR)DSS
ID = 250µA, VGS =0
75
V
breakdown voltage
V
DS = max ratings
Zero gate voltage
1
µA
µA
IDSS
VDS = max ratings,
TC = 125°C
drain current (VGS = 0)
10
Gate-body leakage
current (VDS = 0)
IGSS
VGS
VDS = VGS, ID = 250µA
GS = 10V, ID = 70A
=
20V
100
4
nA
V
VGS(th)
RDS(on)
Gate threshold voltage
2
Static drain-source on
resistance
V
0.0065 0.0075
Ω
Table 4.
Symbol
Dynamic
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Forward
transconductance
(1)
gfs
VDS = 15V, ID = 70A
160
S
Input capacitance
Output capacitance
Ciss
Coss
Crss
5000
960
pF
pF
pF
VDS = 25V, f = 1MHz,
VGS = 0
Reverse transfer
capacitance
310
td(on)
tr
td(off)
tf
Turn-on delay time
Rise time
30
140
130
90
ns
ns
ns
ns
VDD = 38V, ID = 70A
RG = 4.7Ω VGS = 10V
(see Figure 19)
Turn-off delay time
Fall time
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD = 60V, ID = 120A,
VGS = 10V
160
28
218
nC
nC
nC
(see Figure 20)
70
1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %.
4/18
STB140NF75 - STP140NF75-1 - STP140NF75
Electrical characteristics
Table 5.
Symbol
Source drain diode
Parameter
Test conditions
Min.
Typ.
Max. Unit
Source-drain current
ISD
120
480
A
A
Source-drain current
(pulsed)
(1)
ISDM
(2)
VSD
Forward on voltage
ISD = 120A, VGS = 0
1.5
V
ISD = 120A,
trr
Reverse recovery time
Reverse recovery charge
Reverse recovery current
115
450
8
ns
nC
A
di/dt = 100A/µs,
VDD = 35V, Tj = 150°C
(see Figure 21)
Qrr
IRRM
1. Pulse width limited by safe operating area.
2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %
5/18
Electrical characteristics
STB140NF75 - STP140NF75-1 - STP140NF75
Figure 2. Thermal impedance
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area
Figure 3. Output characterisics
Figure 4. Transfer characteristics
Figure 5. Transconductance
Figure 6. Static drain-source on resistance
6/18
STB140NF75 - STP140NF75-1 - STP140NF75
Electrical characteristics
Figure 7. Gate charge vs gate-source voltage Figure 8. Capacitance variations
Figure 9. Normalized gate threshold voltage Figure 10. Normalized on resistance vs
vs temperature
temperature
Figure 11. Source-drain diode forward
characteristics
Figure 12. Normalized B
vs temperature
VDSS
7/18
Electrical characteristics
STB140NF75 - STP140NF75-1 - STP140NF75
Figure 13. Power derating vs Tc
Figure 14. Max I current vs Tc
D
c
Figure 15. Thermal resistance R
copper area
vs PCB
Figure 16. Max power dissipation vs PCB
copper area
thj-a
8/18
STB140NF75 - STP140NF75-1 - STP140NF75
Figure 17. Allowable lav vs time in avalanche
Electrical characteristics
The previous curve gives the safe operating area for unclamped inductive loads, single
pulse or repetitive, under the following conditions:
P
E
= 0.5 * (1.3 * B
* I
)
D(AVE)
AS(AR)
VDSS
AV
= P
* t
AV
D(AVE)
Where:
is the allowable current in avalanche
I
AV
P
is the average power dissipation in avalanche (single pulse)
D(AVE)
t
is the time in avalanche
AV
To derate above 25 °C, at fixed I , the following equation must be applied:
AV
I
= 2 * (T
- T
)/ (1.3 * B
* Z )
VDSS th
AV
jmax
CASE
Where:
Z = K * R is the value coming from normalized thermal response at fixed pulse width
th
th
equal to T
.
AV
9/18
Spice thermal model
STB140NF75 - STP140NF75-1 - STP140NF75
3
Spice thermal model
Table 6.
Parameters
Parameter
Node
Value
CTHERM1
CTHERM2
CTHERM3
CTHERM4
CTHERM5
CTHERM6
7 - 6
6 - 5
5 - 4
4 - 3
3 - 2
2 - 1
1.49 * 10-3
3.50 * 10-2
5.94 * 10-2
9.74 * 10-2
8.86 * 10-2
8.27 * 10-1
RTHERM1
RTHERM2
RTHERM3
RTHERM4
RTHERM5
RTHERM6
7 - 6
6 - 5
5 - 4
4 - 3
3 - 2
2 - 1
0.0384
0.0624
0.072
0.0912
0.1008
0.1152
Figure 18. Scheme
10/18
STB140NF75 - STP140NF75-1 - STP140NF75
Test circuit
4
Test circuit
Figure 19. Switching times test circuit for
resistive load
Figure 20. Gate charge test circuit
Figure 21. Test circuit for inductive load
switching and diode recovery times
Figure 22. Unclamped Inductive load test
circuit
Figure 23. Unclamped inductive waveform
Figure 24. Switching time waveform
11/18
Package mechanical data
STB140NF75 - STP140NF75-1 - STP140NF75
5
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect . The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
12/18
STB140NF75 - STP140NF75-1 - STP140NF75
Package mechanical data
D2PAK MECHANICAL DATA
mm.
inch
DIM.
MIN.
4.4
TYP
MAX.
4.6
MIN.
0.173
0.098
0.001
0.027
0.044
0.017
0.048
0.352
TYP.
MAX.
0.181
0.106
0.009
0.036
0.067
0.023
0.053
0.368
A
A1
A2
B
2.49
0.03
0.7
2.69
0.23
0.93
1.7
B2
C
1.14
0.45
1.23
8.95
0.6
C2
D
1.36
9.35
D1
E
8
0.315
0.334
10
10.4
0.393
E1
G
8.5
4.88
15
5.28
15.85
1.4
0.192
0.590
0.050
0.055
0.094
0.208
0.625
0.055
0.068
0.126
L
L2
L3
M
1.27
1.4
1.75
3.2
2.4
R
0.4
0.015
V2
0º
4º
1
13/18
Package mechanical data
STB140NF75 - STP140NF75-1 - STP140NF75
TO-262 (I2PAK) MECHANICAL DATA
mm.
TYP
inch
TYP.
DIM.
MIN.
4.40
2.40
0.61
1.14
0.49
1.23
8.95
2.40
4.95
10
MAX.
4.60
2.72
0.88
1.70
0.70
1.32
9.35
2.70
5.15
10.40
14
MIN.
0.173
0.094
0.024
0.044
0.019
0.048
0.352
0.094
0.194
0.393
0.511
0.137
0.050
MAX.
0.181
0.107
0.034
0.066
0.027
0.052
0.368
0.106
0.202
0.410
0.551
0.154
0.055
A
A1
b
b1
c
c2
D
e
e1
E
L
13
L1
L2
3.50
1.27
3.93
1.40
14/18
STB140NF75 - STP140NF75-1 - STP140NF75
Package mechanical data
TO-220 MECHANICAL DATA
mm.
TYP
inch
DIM.
MIN.
4.40
0.61
1.15
0.49
15.25
10
MAX.
4.60
0.88
1.70
0.70
15.75
10.40
2.70
5.15
1.32
6.60
2.72
14
MIN.
0.173
0.024
0.045
0.019
0.60
TYP.
MAX.
0.181
0.034
0.066
0.027
0.620
0.409
0.106
0.202
0.052
0.256
0.107
0.551
0.154
A
b
b1
c
D
E
0.393
0.094
0.194
0.048
0.244
0.094
0.511
0.137
e
2.40
4.95
1.23
6.20
2.40
13
e1
F
H1
J1
L
L1
L20
L30
øP
Q
3.50
3.93
16.40
28.90
0.645
1.137
3.75
2.65
3.85
2.95
0.147
0.104
0.151
0.116
15/18
Packaging mechanical data
STB140NF75 - STP140NF75-1 - STP140NF75
6
Packaging mechanical data
2
D PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
mm
MIN. MAX. MIN. MAX.
330 12.992
inch
DIM.
A
B
C
D
G
N
T
1.5
12.8
20.2
24.4
100
0.059
13.2 0.504 0.520
0795
26.4 0.960 1.039
3.937
30.4
1.197
BASE QTY
BULK QTY
1000
TAPE MECHANICAL DATA
1000
mm
inch
DIM.
MIN. MAX. MIN. MAX.
10.5 10.7 0.413 0.421
15.7 15.9 0.618 0.626
A0
B0
D
1.5
1.6 0.059 0.063
D1
E
1.59 1.61 0.062 0.063
1.65 1.85 0.065 0.073
F
11.4
4.8
3.9
11.9
1.9
50
11.6 0.449 0.456
5.0 0.189 0.197
4.1 0.153 0.161
12.1 0.468 0.476
2.1 0.075 0.082
1.574
K0
P0
P1
P2
R
T
0.25 0.35 0.0098 0.0137
23.7 24.3 0.933 0.956
W
* on sales type
16/18
STB140NF75 - STP140NF75-1 - STP140NF75
Revision history
7
Revision history
Table 7.
Date
Revision history
Revision
Changes
21-Jun-2004
19-Jun-2006
28-Jun-2006
2
3
4
Preliminary datasheet
New template, content change
Graphical updates, Figure 10 and Figure 13
17/18
STB140NF75 - STP140NF75-1 - STP140NF75
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED,
AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS,
NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR
SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2006 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
18/18
相关型号：
B140Q-13-F
Rectifier Diode, Schottky, 1 Element, 1A, 40V V(RRM), Silicon, GREEN, PLASTIC, SMA, 2 PIN
DIODES
©2020 ICPDF网 联系我们和版权申明